EEVblog > EEVblog Specific

EEVblog #1218 - 1GHz Oscilloscope Spec Shootout

(1/8) > >>

EEVblog:
Spreadsheet spec and feature comparison of eight 1GHz bandwidth oscilloscopes
Also a look at 2nd hand scopes.
Siglent SDS5000
Rigol DS7000 (500MHz)
Rohde and Schwarz RTM3000
Keysight 3000X
Keysight 4000X
Tektronix Series 3 MDO
Tektronix Series 4 MSO
Lecroy Wavesurfer 3000

tautech:
SDS5000X will have Bode plot added in coming firmware and PA added too as an option AFAIK.
Performa01 has made comment about this in a thread.

The Arb option is a 14 bit SAG1021 module as you've mentioned.

Oh, and as these run dual 5GSa/s ADC's, each has 250M of support for a total of 500M.

chickenHeadKnob:
to put in an external 1080p hdmi out is maybe $20 or less worth of parts. inexcusable these days

EEVblog:

--- Quote from: tautech on June 06, 2019, 04:42:00 am ---SDS5000X will have Bode plot added in coming firmware and PA added too as an option AFAIK.

--- End quote ---

Yes, confirmed, I heard from them, being added around Q3

EEVblog:

--- Quote from: chickenHeadKnob on June 06, 2019, 08:50:44 am ---to put in an external 1080p hdmi out is maybe $20 or less worth of parts. inexcusable these days

--- End quote ---

One problem may be the data mapping system.
Keysight for example have a fixed 800x600 in the ASIC, and map samples to the screen all inside the ASIC.
So you'd have to have 1080p built into the mapping system from the get-go with a fast data path

Navigation

[0] Message Index

[#] Next page