Author Topic: EEVblog #1125 - Amazing $500 Soldering/Inspection Microscope and Elgato Capture  (Read 381 times)

0 Members and 1 Guest are viewing this topic.

Offline jficara

  • Newbie
  • Posts: 4
  • Country: us
Greetings Friends,

Loved the videos on the Eakins camera, thanks Dave!  I am thinking of getting one and was wondering if anyone has had success using any of the Elgato HDMI capture cards with it?

Thanks so very much!
 

Offline jficara

  • Newbie
  • Posts: 4
  • Country: us
I received my Eakins camera, works fantastic, thanks again for that review Dave!

I also confirmed that the camera works great with the Elgato cam link 4k https://www.elgato.com/en/gaming/cam-link-4k for video capture.

The firmware I have also supports measurement so once you calibrate the camera you can measure just dandy.  Calibration basically is just putting something of a known size in the camera view then measuring it using the line tool and entering the measurement in mm or which ever units you pick from the dropdown menu.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf