EEVblog > EEVblog Specific

EEVblog 1552 - Digilent Analog Discovery 3

(1/3) > >>

EEVblog:
A first look at the new Digilent Analog Discovery 3, plus teardown.

00:00 - Unboxing the new Digilent Analog Discovery 3
02:23 - New features
05:00 - The price and comparison with a benchtop scope
06:19 - Teardown and comparison with Analog Discovery 2
10:18 - Nice design touches
https://digilent.com/blog/whats-different-with-the-analog-discovery-3/
12:01 - In operation using the Waveforms software
14:04 - Different product support and modes
16:25 - Highest resolution possible
18:12 - Lets feed it up it's own clacker...
21:30 - Check THIS out!
23:30 - The Help system
24:51 - The Power Supply
27:08 - I can't possibly demo all the features. Spectrograms, Persistence, Eye Diagrams, Histrogram, FFT's
28:04 - OMG you can ramp and modulate the Power Suppply! Let's try this...
32:24 - It's useful, but not universally useful.
32:22 - The timebase scale is kinda annoying
34:41 - Adding NOISE to the PSU!
36:47 - Let's SHORT this sucker...
38:49 - Have you tried turning it off and on again?
39:55 - Is this a bug?
40:49 - Dumb arse Dave
42:05 - Measurements
43:57 - Check this out!
44:40 - FFT
45:33 - 3D spectrogram
48:49 - Conclusion

Fungus:
Yes, you can use it with a sound card for free.

rpro:
As Dave pointed out, the software is incredibly good. In addition to features Dave has shown, I especially like the properly labeled axes for multiple channels, fully featured mouse control (e.g, you can use the mouse wheel if you like to change scales super fast). Dragging works as expected, to drag waveforms, to rotate 3-D views, to change scales, in (multiple) zoom windows, etc. It has fully featured math channels. The SA has peak/minimum holds, multiple averaging modes, multiple measurements (like THD), multiple marker modes, etc. There is also a network analyzer and other tools, all with many useful features.
 
You can download it for free and see what all it can do (with its various built-in DEMO devices) and use it for real (for free) with a sound card (internal or USB). Actually you can use two cards if you like, 1 for Scope and 1 for Wavegen, with 2 (up to 4) channels each. The software runs on Linux/Windows/Mac and Raspberry-Pi-4. 

RIGOL AND SIGLENT TAKE NOTE: This is how software should be. This software has been great for years now, and yet Digilent releases new beta versions with enhancements several times per month. Their support (done via a users' forum) is incredibly good, with same-day responses.

I don't know what the economics of their hardware pricing is, but if it were cheaper, everyone that ever uses a scope would most probably own one.

tggzzz:

--- Quote from: rpro on July 09, 2023, 03:36:56 pm ---As Dave pointed out, the software is incredibly good.

--- End quote ---

I like it too, but the linux variant doesn't have the 3D XYZ display (only 2D XY).

Another point is that the API is documented, so you can create your own scripts in JavaScript, C, glass TTY etc. That leads to the possibility of simple ATE setups, and to (limited range) component testers/plotters.

attila:
Hi Dave

- Press F1 to switch to the Help tab and locate info about the currently focused control.
- The Filter channels can be configured after pressing the green arrow "more channels" under Channel 2 in Scope.
- With the default “USB Power” “Stop with AUX” option, removing AUX will reset the device. With the "Always ON" option, the device does not restart and indicates the USB voltage after disconnecting the AUX due to the minimal back-power of the AUX eFuse.
- Thank you for the review and noticing the "C4" typo in Wavegen/Type.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod