| EEVblog > EEVblog Specific |
| EEVblog 1650 - Sequre HT-140 SMD Desoldering Tweezers REVIEW |
| << < (8/9) > >> |
| W00fer:
Sequre needs 2 things in this firmware If you connect a 100w charger 20v 5A and then a 15v 3a (45w) charger it bootloops until you change the setting in the menu. Also if you disconnect one of the tips it goes constantly into beeping error, until you plug it back in and turn it off in the menu. It should fallback to one only if the other isn't connected. |
| W00fer:
It seems that the 3 and 5 mm wide C210 addons are only manufactured by Sequre? Anyone got another link for them? |
| atroz:
YIHUA has some that look the same. I ordered them yesterday because AliExpress offered free shipping on them but not the Segure ones. Will take a week or more for them to arrive and see if I made a mistake or not. https://www.aliexpress.com/item/1005008269476408.html |
| W00fer:
--- Quote from: atroz on January 02, 2025, 07:53:07 pm ---YIHUA has some that look the same. I ordered them yesterday because AliExpress offered free shipping on them but not the Segure ones. Will take a week or more for them to arrive and see if I made a mistake or not. https://www.aliexpress.com/item/1005008269476408.html --- End quote --- Thanks a lot. I tried to find these but only found C245 ones. |
| IanJ:
I have these tweezers, but didn't like the lack of earth ground on the PSU which was generating 104Vrms / 335Vp-p on the tips! ......so did something about it: https://youtu.be/se6-jGZsHS0 Ian. |
| Navigation |
| Message Index |
| Next page |
| Previous page |