Author Topic: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review  (Read 679 times)

0 Members and 3 Guests are viewing this topic.

Offline EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 41091
  • Country: au
    • EEVblog
EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« on: December 06, 2025, 01:49:13 am »
Review of the AlienTek DM40 Multimeter/Oscilloscope
https://s.click.aliexpress.com/e/_c4EPQJod

00:00 - Alientek DM40C Multimeter and Oscilloscope
02:12 - Unboxing
03:51 - What's with the rotating tilting bail?
06:15 - Power on
08:53 - The Trend Chart is really nice
10:19 - Online/Offline mode, what IS this?
11:58 - Banana jacks please
12:07 - Megaohms interference issue
13:20 - Autoranging speed & Continuity & Diode
14:08 - No AutoHold
14:31 - Isolated inputs?
14:58 - Calibration checks
16:52 - Capacitance interference?
18:37 - Relative mode
19:10 - Colour LCD inside and outside
20:04 - Temp is a bit off
20:15 - No internal recording
20:53 - Reading memory
22:02 - Oscilloscope functionality
26:28 - Function Generator
28:46 - FFT
29:09 - Bluetooth functionality
31:33 - Three Finger Screen Shot
32:31 - It's got magnets!
32:51 - Teardown
37:56 - Analog front end
38:46 - Power consumption measurement
39:03 - PCB inspection talking head
45:08 - Conclusion

 
The following users thanked this post: gamalot, TUMEMBER, mawyatt, Dominik

Online TUMEMBER

  • Regular Contributor
  • *
  • Posts: 116
  • Country: pl
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #1 on: December 06, 2025, 01:07:22 pm »
Review of the AlienTek DM40 Multimeter/Oscilloscope
https://s.click.aliexpress.com/e/_c4EPQJod


Dave, Unfortunately, the link doesn't work. Ali creates " access zones." For a split second, I see the product page, and then a "404 page" pops up. This "pig algorithm" targets the audience. :box:
« Last Edit: December 06, 2025, 01:09:42 pm by TUMEMBER »
W życiu nie ma nic za darmo, są tylko różne formy płatności.
Wciąż płacimy okruchami własnego czasu.
 

Offline Fryguy

  • Regular Contributor
  • *
  • Posts: 166
  • Country: de
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #2 on: December 06, 2025, 02:48:04 pm »
That 4 pin connector on the lower right looks like a serial interface to me .

V-D-C-G = Voltage-Data-Clock-Ground maybe ?  :-//
Born error amplifier  >.<
 

Offline gamalot

  • Super Contributor
  • ***
  • Posts: 1720
  • Country: au
  • Correct my English
    • Youtube
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #3 on: December 06, 2025, 04:20:52 pm »
The resistor divider is from a Chinese maker, spec'd at 0.1% and 10 ppm/°C.
I'm a poet, I didn't even know it. |  https://youtube.com/@gamalot | https://github.com/gamalot
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 8738
  • Country: us
    • SiliconValleyGarage
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #4 on: December 06, 2025, 05:24:25 pm »
That 4 pin connector on the lower right looks like a serial interface to me .

V-D-C-G = Voltage-Data-Clock-Ground maybe ?  :-//
SWD for the arm ?
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 8738
  • Country: us
    • SiliconValleyGarage
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #5 on: December 06, 2025, 05:25:59 pm »
anyone knows who makes those dc/dc transformers ? and what is the driver chip ? i've used the TI and maxim chippies, but these look from a different vendor.
the little trasnformers are interesting.
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline gamalot

  • Super Contributor
  • ***
  • Posts: 1720
  • Country: au
  • Correct my English
    • Youtube
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #6 on: December 06, 2025, 05:50:42 pm »
anyone knows who makes those dc/dc transformers ? and what is the driver chip ? i've used the TI and maxim chippies, but these look from a different vendor.
the little trasnformers are interesting.

I couldn't find any info on the LT61-11x, but there's some available for the LT51-11x that you can use as a reference.

I'm a poet, I didn't even know it. |  https://youtube.com/@gamalot | https://github.com/gamalot
 

Offline Fungus

  • Super Contributor
  • ***
  • Posts: 18057
  • Country: 00
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #7 on: December 06, 2025, 11:43:55 pm »
Nice!

This could be the new recommended piece of test gear for newbies to get.

One thing: Does it work while plugged in? Can I powered it all day long with a phone charger?
 

Offline EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 41091
  • Country: au
    • EEVblog
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #8 on: Yesterday at 09:57:47 pm »
This could be the new recommended piece of test gear for newbies to get.

I wouldn't say that because:
a) It's not cheap.
b) If you just want a multimeter then there is better bang-per-buck out there.
c) If you need a portable scope then there is probably better bang-per-buck out there.

 
The following users thanked this post: Aldo22

Offline EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 41091
  • Country: au
    • EEVblog
Re: EEVblog 1723 - AlienTek DM40 Multimeter/Oscilloscope Review
« Reply #9 on: Today at 04:06:08 am »
Alientek said the iOS is available on the iOS store.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf