Link of the video.
Hi Dave ..
Many interesting findings again.
Now speaking about speed ... we have say all ready so much about it.
We made known the GSM story about eight months back.
In a way, due to the fact, that the cure was related in a hardware level,
personally I can not evaluate their response speed.
The most juicy detail as change looks to be the LCD display,
yea it looks much better and the degrees of the viewable angle got improved by allot,
the Fluke 28II I think that haves a bit better viewable angle from the 87V sold until today.
If you like test the new 87V/EUR with the 28II and share your thoughts, about the viewable angle.
The dark tint in the LCD screen, it did effected me in a way,
the latest Agilent industrial DMM are using too this " a bit dark " display and I was close to accuse them by having the bright Fluke as example,
the problem is that now the screen looks better with the back light on, but it forces you to operate the back light more often,
if you are in area with poor natural light.
Small down size, but some people working in the field, they will spot the difference.
By the way, I watched some parts of the video, and I did not spotted any battery consumption measurements.
Like how is the LCD display consumption, compared with the " old revision " PCB ?
About the test leads I will predict that the TL-75, they will suddenly start to sell on Ebay like hot cakes,
because with them the DMM becomes more practical, if you use to turn and secure the test leads around the holster.
Nice video as always .. Thump up.