EEVblog #978 - Keysight 1000X Hacking

[Bud]

Likely the Display show mode, to sit on the shelf in the showroom and loop through different modes to demonstrate the device's capabilities.

[HighVoltage]

Thanks
Any idea of how to turn this DEMO mode on?
It seems I can not find anything to this on the Keysight website.

[HighVoltage]

It seems the store DEMO mode can be turned on by:

> Options
> Preferences
> Screen Saver
> Store Demo (turn off)

But this works with and without the DIS option turned on.

It seems DIS = distributor option.
But is this really only for the store demo mode?
It seems not.

[Bud]

It's been a while, i forget... The distributer license as far as i remember enables a few other options for the duration of evaluation period.

[Bud]

Yes, DIS is distributor license, it temporarily enables the features marked with the 'x' in the Pack1 column.

[tv84]

What is the "DIS" option on the 1000X and what does it do?

The DIS is a "Distributor" license that usually represents a pack of licenses (dependent on the device model) that are made available by KS salesmen in a temporary form so that he or the customer can try the included options for a certain trial period.

AFAIK there are 3 different DIS licenses which represent packs for different devices (1000X, 2000X, 3000X). Don't know if the DIS includes limited options on a EDU vs non-EDU version.

[sky2city]

I follow this thread to upgrade my Dsox2011G, Yeah, the PWR option is actived. But what I call PWR option by
 pressing analuye key, it seem can not roll down the selection to PSRR, or other. So none of PWR function can be apply.
So I think PWR funtion is not dev. in Dosx1000 series firmwear.
anyone have the same case with it?
Roger.

[Bud]

PWR does not work.

[sky2city]

PWR does not work.

It seem  the RFA have many updated on V1.20.

[kansasray]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

[Anthocyanina]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

https://gofile.io/d/u6Hzkw there you go

[orbital]

Hi, I have a dsox1102g, would the patched 1000x firmware work on this model?

[Bud]

All beige color 1000X scopes. Not the black 1200X ones, those ones run Linux.

[Wong]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

https://gofile.io/d/u6Hzkw there you go

Hi Anthocyanina,could you please upload the file again

[Anthocyanina]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

https://gofile.io/d/u6Hzkw there you go

Hi Anthocyanina,could you please upload the file again

https://gofile.io/d/Fa4qwt there you go! if anyone can host this for longer, that would be great!

[leequng]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

https://gofile.io/d/u6Hzkw there you go

Hi Anthocyanina,could you please upload the file again

https://gofile.io/d/Fa4qwt there you go! if anyone can host this for longer, that would be great!

nice！！

[thaamike]

Does this work for the DSOX1204g? Is there a chance to get the file again ?

[Bud]

It does not work for 1200 series scopes.

[thaamike]

tnx for the info. To sad the BW upgrade is so expensive .....

[effeffe]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

https://gofile.io/d/u6Hzkw there you go

Hi Anthocyanina,could you please upload the file again

https://gofile.io/d/Fa4qwt there you go! if anyone can host this for longer, that would be great!

If you could re-upload it, I should be able to move the files onto mega.nz, so that there is no time limit.

Thanks =)

[minolta]

Hello,
can you resend the FW again? I want to use it and older links are expired... thanks!!

[Anthocyanina]

here it is! wish i had somewhere to keep it permanently https://gofile.io/d/K2rj0S

Hi Anthocyanina, could you upload the file again please. 

https://gofile.io/d/u6Hzkw there you go

Hi Anthocyanina,could you please upload the file again

https://gofile.io/d/Fa4qwt there you go! if anyone can host this for longer, that would be great!

If you could re-upload it, I should be able to move the files onto mega.nz, so that there is no time limit.

Thanks =)

Cool, here it is! https://gofile.io/d/cQAIy3

[minolta]

Thank you!
Is there any way how to change the scope type in screen "About oscilloscope" from EDU-X 1002A to DSOX 1102G?

[effeffe]

Thank you very much!
Here is the link: https://mega.nz/file/GkVSVaiY#3PVl1AI0F0FEWE_RMl5mqP7kXpECmojEtstUbp-zX6I

[minolta]

For BUD:
Anthocyanina wrote me you maybe know the possibility how to change / or where is stored/ oscilloscope type. I have EDUX type. I have changed modyfied FW and resistor on the main board and the scope type is still shown like EDUX type. Is possibility to change it to DSO-X type? This is shown in About oscilloscope" screen.
Thanks!