EEVblog > EEVblog Specific

EEVblog #978 - Keysight 1000X Hacking

<< < (193/196) > >>

pa3hfu:
To BUD.

Pse can you answer my question? See picture above.
Thanks!

Mathieu

JDubU:
Mathieu:

https://www.eevblog.com/forum/blog/eevblog-978-keysight-1000x-hacking/msg3217012/#msg3217012
https://www.eevblog.com/forum/blog/eevblog-978-keysight-1000x-hacking/?action=dlattach;attach=1059298;image

pa3hfu:
Thanks JDubU!

Unfortunately, the values ​​of the 4 resistors are not easy to read.
If the picture I posted above is correct, I know which 2 resistors I need to solder in parallel on my EDUX1002A.

JDubU:
Your picture above is not correct.

For DSOX1102A (no wavegen):

10K (01C)       12.1K (09C)


6.49k (79B)     4.64k (65B)


If you prefer to use parallel resistors, you can use this calculator:
https://www.omnicalculator.com/physics/parallel-resistor

Here is a calculator for the (EIA-96) resistor codes:
https://www.digikey.com/en/resources/conversion-calculators/conversion-calculator-smd-resistor-code

pa3hfu:
Thanks!
SMD 79b and 65B cannot be found on the internet. Even Aliexpress is sold out...
So parallel mounting seems to be the only option.

Navigation

[0] Message Index

[#] Next page

[*] Previous page