Author Topic: EEVblog#160 – 555 Timer Easter Egg?  (Read 19932 times)

0 Members and 1 Guest are viewing this topic.

Offline metalphreakTopic starter

  • Frequent Contributor
  • **
  • Posts: 815
  • Country: au
  • http://d.av.id.au
    • D.av.id.AU
EEVblog#160 – 555 Timer Easter Egg?
« on: April 01, 2011, 02:25:06 pm »
Hey Dave,

Can confirm the same thing happens with a SGS THOMSON SOIC package 555!

Easter Eggs in everything. It's crazy.

Offline dimlow

  • Frequent Contributor
  • **
  • Posts: 301
  • Country: gb
  • Likes to be thought of as
    • Dimlow Ponders
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #1 on: April 01, 2011, 03:37:35 pm »
Hey Dave,

Can confirm the same thing happens with a SGS THOMSON SOIC package 555!

Easter Eggs in everything. It's crazy.

Yep confirmed it TODAY!
 

Offline firewalker

  • Super Contributor
  • ***
  • Posts: 2450
  • Country: gr
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #2 on: April 01, 2011, 03:48:30 pm »
I love Easter Eggs (on every date :p). In one of my projects containing an alphanumeretic lcd the "Easter Egg" was instructions for obtaining the source code.
Become a realist, stay a dreamer.

 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #3 on: April 01, 2011, 06:30:24 pm »
Interesting.

Looking at the internal schematic of the 555 doesn't explain it. If it's deliberate, then there's more to the schematic than the datasheet gives, if it's a coincidence there's some parasitic element inside the IC which is to blame.
 

Offline oPossum

  • Super Contributor
  • ***
  • Posts: 1413
  • Country: us
  • Very dangerous - may attack at any time
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #4 on: April 01, 2011, 07:31:46 pm »
It works with National LM7555 (CMOS version), but only at a supply voltage of 7.555 volts.
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #5 on: April 01, 2011, 07:33:55 pm »
It works with National LM7555 (CMOS version), but only at a supply voltage of 7.555 volts.
Lol, you can't be serious. Perhaps Dave should test this?
 

Offline buffalo960

  • Contributor
  • Posts: 22
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #6 on: April 01, 2011, 07:44:58 pm »
I think I should show this video to my digital circuits class today ;)
 

Offline Strube09

  • Regular Contributor
  • *
  • Posts: 125
  • Country: 00
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #7 on: April 01, 2011, 07:57:07 pm »
Yep,

But it doesn't seem very stable on my end.... Will have to test again tomorrow to see if it works again  ;)
 

Offline oPossum

  • Super Contributor
  • ***
  • Posts: 1413
  • Country: us
  • Very dangerous - may attack at any time
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #8 on: April 01, 2011, 08:29:15 pm »
Lol, surely you can't be serious.

I am serious. And don't call me Shirley.
 

Offline Lance

  • Frequent Contributor
  • **
  • Posts: 317
  • Country: 00
  • Resistance if futile if R<1Ohm
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #9 on: April 01, 2011, 10:50:28 pm »
Wow, this is pretty cool! I'll see if I can give it a try.
#include "main.h"
//#include <killallhumans.h>
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37626
  • Country: au
    • EEVblog
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #10 on: April 01, 2011, 11:16:54 pm »
Interesting.

Looking at the internal schematic of the 555 doesn't explain it. If it's deliberate, then there's more to the schematic than the datasheet gives, if it's a coincidence there's some parasitic element inside the IC which is to blame.

Hans was a clever designer, I'm sure it's very subtle...

Dave.
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37626
  • Country: au
    • EEVblog
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #11 on: April 01, 2011, 11:18:48 pm »
It works with National LM7555 (CMOS version), but only at a supply voltage of 7.555 volts.

Awesome, will have to try it.
Hans was bought back to design the 7555, so makes sense he put something in that too.

Dave.
 

Offline Lance

  • Frequent Contributor
  • **
  • Posts: 317
  • Country: 00
  • Resistance if futile if R<1Ohm
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #12 on: April 02, 2011, 03:51:08 am »
I wonder what would happen if you made a 555 out of discrete components.
#include "main.h"
//#include <killallhumans.h>
 

Offline steaky1212

  • Regular Contributor
  • *
  • Posts: 95
  • Country: gb
    • Steaky - Sleep is overrated
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #13 on: April 02, 2011, 07:45:23 am »
Am I the only one that thinks April Fools??
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #14 on: April 02, 2011, 08:13:33 am »
Am I the only one that thinks April Fools??
Of course, lol, I can't believe we fell for it.
 

Offline tnt

  • Regular Contributor
  • *
  • Posts: 241
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #15 on: April 02, 2011, 08:30:13 am »
A question would be "how did he do it ?".

I guess the scope leads don't connect to the breadboard at all but to some signal generator with a modulation input ?
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #16 on: April 02, 2011, 09:25:30 am »
What didn't make sense to me was the frequency seemed to be changing slightly, yet he detected the modulation using a simple low pass filter which shouldn't work, so it should've been obvious something was a miss.
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37626
  • Country: au
    • EEVblog
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #17 on: April 02, 2011, 09:43:47 am »
I guess the scope leads don't connect to the breadboard at all but to some signal generator with a modulation input ?

I can assure you, the scope leads were connected directly to the 555 as explained.

Dave.
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #18 on: April 02, 2011, 10:33:53 am »
The circuit doesn't match the schematic.

The pot is really 200R rather than 500R and then there's all those resistors connected in parallel.

The pot should also never be allowed to go too low otherwise it'll burn out the discharge transistor in pin 7 so there should be a fixed resistor in series with it.
 

Offline neoone

  • Regular Contributor
  • *
  • Posts: 70
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #19 on: April 02, 2011, 12:04:19 pm »
I can assure you, the scope leads were connected directly to the 555 as explained.

Dave.
Is there a prize for figuring out how you did it? ;)
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37626
  • Country: au
    • EEVblog
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #20 on: April 02, 2011, 12:53:12 pm »
It matches.
As mentioned, the values are approximate.
Only found a 200R pot in my kit, so used a series resistor as well.
The 1k5 is made with 3 resistors to tweak the value so I could get the range needed.
No trickery in the resistors at all.

Dave.
 

Offline ShiftPlusOne

  • Regular Contributor
  • *
  • Posts: 51
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #21 on: April 02, 2011, 03:42:29 pm »
I hope there's a reveal coming up then.
 

Offline neoone

  • Regular Contributor
  • *
  • Posts: 70
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #22 on: April 02, 2011, 06:32:56 pm »
and that's a normal 555 timer not some uC in DIP8 ? ;) I don't suppose Dave did something with Agilent scope heh. 
 

Offline ShiftPlusOne

  • Regular Contributor
  • *
  • Posts: 51
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #23 on: April 02, 2011, 07:49:18 pm »
Not just an engineer, but a magician also apparently.
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37626
  • Country: au
    • EEVblog
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #24 on: April 02, 2011, 09:55:41 pm »
and that's a normal 555 timer not some uC in DIP8 ? ;) I don't suppose Dave did something with Agilent scope heh. 

Yep, brand new bog standard National 555 timer.
Try harder!

Bueller?, Bueller?

Dave.
 

Offline AdShea

  • Contributor
  • Posts: 35
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #25 on: April 03, 2011, 03:28:53 am »
Are you putting the signal in through the power supply?
 

Offline Lance

  • Frequent Contributor
  • **
  • Posts: 317
  • Country: 00
  • Resistance if futile if R<1Ohm
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #26 on: April 03, 2011, 05:37:39 am »
I posted this in another forum...the response is skeptical.

http://www.physicsforums.com/showthread.php?p=3226304#post3226304
#include "main.h"
//#include <killallhumans.h>
 

Offline ShiftPlusOne

  • Regular Contributor
  • *
  • Posts: 51
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #27 on: April 03, 2011, 05:52:31 am »
Doesn't seem they are being skeptical as much as they are just being asshats.
 

Offline firewalker

  • Super Contributor
  • ***
  • Posts: 2450
  • Country: gr
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #28 on: April 03, 2011, 08:06:02 am »
Are you putting the signal in through the power supply?

Dave used batteries also.
Become a realist, stay a dreamer.

 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #29 on: April 03, 2011, 08:35:28 am »
Take a look Here
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline neoone

  • Regular Contributor
  • *
  • Posts: 70
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #30 on: April 03, 2011, 09:25:44 am »
Could you explain some things? Are you saying there is not only 55.5kHz but also it's harmonics at 111kHz ? sorry but I couldn't understand few words on your video probably due to accent ;) Or maybe you wanted to show Us that there is something injected to the signal through a ground loop of the probes ?
 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #31 on: April 03, 2011, 09:28:23 am »
It's not my video  :) Just found it on YouTube.
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline neoone

  • Regular Contributor
  • *
  • Posts: 70
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #32 on: April 03, 2011, 09:56:42 am »
oh, OK :) Any ideas then ?
 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #33 on: April 03, 2011, 10:41:48 am »
As I understand it he says that it also modulates at 111hz at 111khz carrier ie twice Daves frequency. 55khz could be the fundamental frequency or another harmonic, still not convinced that there isn't some sneaky business going on but it's beyond me, just have to wait for Dave to come clean or someone to crack it........watch this space ;)
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline tnt

  • Regular Contributor
  • *
  • Posts: 241
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #34 on: April 03, 2011, 10:48:14 am »
Quote from the video author found on youbtube :

Quote
If he has done it like me, than there is a hidden wire to the control voltage pin, from an external sine generator, adjusting the level with another? pot outside the camera view. Of course, if you add a capacitor from this input to ground, the modulating signal will be shorted :-)
 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #35 on: April 03, 2011, 02:07:28 pm »
Perhaps Daves April Fool will get to be as famous as this
http://news.bbc.co.uk/onthisday/hi/dates/stories/april/1/newsid_2819000/2819261.stm
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #36 on: April 03, 2011, 03:36:01 pm »
As I understand it he says that it also modulates at 111hz at 111khz carrier ie twice Daves frequency. 55khz could be the fundamental frequency or another harmonic, still not convinced that there isn't some sneaky business going on but it's beyond me, just have to wait for Dave to come clean or someone to crack it........watch this space ;)
That makes sense, so it/s not just the frequency which changes, varying the voltage on pin 5 also varies the duty cycle which can be detected with a simple RC filter.
 

Offline Lance

  • Frequent Contributor
  • **
  • Posts: 317
  • Country: 00
  • Resistance if futile if R<1Ohm
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #37 on: April 03, 2011, 04:43:06 pm »
Doesn't seem they are being skeptical as much as they are just being asshats.
I found this slightly amusing:

One person: I want to know what brand solder flux that guy is using and how much he's inhaling.
Another person: Holy jeez, I know! He is rather obnoxious.
#include "main.h"
//#include <killallhumans.h>
 

Offline ziq8tsi

  • Regular Contributor
  • *
  • Posts: 80
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #38 on: April 03, 2011, 06:35:49 pm »

I do not detect any extra wires going to the breadboard, but I notice that Dave is working on top of a thin mat.  So I am going to suggest a loop antenna underneath transmitting the 55.5Hz signal.  With the cap missing, the breadboard spring would need to pick up well enough to put a few tens of mV swing onto the control pin (which is connected to the 5k-5k divider internally).
 

Offline DrGeoff

  • Frequent Contributor
  • **
  • Posts: 793
  • Country: au
    • AXT Systems
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #39 on: April 04, 2011, 03:13:46 am »
Dave must be reading too much of 'Harmonic 695'! Maybe time to get out our tin foil hats :)
Was it really supposed to do that?
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37626
  • Country: au
    • EEVblog
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #40 on: April 04, 2011, 04:06:19 am »
Doesn't seem they are being skeptical as much as they are just being asshats.
I found this slightly amusing:

One person: I want to know what brand solder flux that guy is using and how much he's inhaling.
Another person: Holy jeez, I know! He is rather obnoxious.

I get comments like that all the time!
They wouldn't now what enthusiasm is if it bit them on the arse.

Dave.
 

Offline itstemo1

  • Newbie
  • Posts: 2
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #41 on: April 04, 2011, 06:48:14 am »
Can we get a Detail Sketch (all the values and where you took your measurement).

I am new to electronics and just got myself a oscilloscope and I can't get the same wave form as you did. Sorry n00by speaking.
 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #42 on: April 04, 2011, 04:13:30 pm »
Very interesting 1/2 second or so at about 2:15 are those wires to the bottom of the bread board? aerial?
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline Lance

  • Frequent Contributor
  • **
  • Posts: 317
  • Country: 00
  • Resistance if futile if R<1Ohm
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #43 on: April 04, 2011, 04:34:01 pm »
Doesn't seem they are being skeptical as much as they are just being asshats.
I found this slightly amusing:

One person: I want to know what brand solder flux that guy is using and how much he's inhaling.
Another person: Holy jeez, I know! He is rather obnoxious.

I get comments like that all the time!
They wouldn't now what enthusiasm is if it bit them on the arse.

Dave.
Ha! You said arse...
#include "main.h"
//#include <killallhumans.h>
 

Offline steaky1212

  • Regular Contributor
  • *
  • Posts: 95
  • Country: gb
    • Steaky - Sleep is overrated
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #44 on: April 04, 2011, 04:55:22 pm »
Very interesting 1/2 second or so at about 2:15 are those wires to the bottom of the bread board? aerial?

haha, busted i think
 

Offline neoone

  • Regular Contributor
  • *
  • Posts: 70
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #45 on: April 04, 2011, 09:25:41 pm »
You meant that ?

 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #46 on: April 04, 2011, 10:04:52 pm »
Yep! Looks suspiciously like an aerial coil or a pair of wires to me, could be just a wire clipping but the breadboard seems to be stood on some sort of mat. Makes me suspect some sort of magnetic loop or rfid type of thing (running out of ideas so any straw looks good  ;D)
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline insurgent

  • Regular Contributor
  • *
  • Posts: 78
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #47 on: April 06, 2011, 04:38:51 am »
Just listened to the latest AmpHour. Definitely sounds like you nailed it FreeThinker!

Good thing Dave doesn't work for the CIA/NSA/FBI.  ;D
 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #48 on: April 06, 2011, 08:36:27 pm »
Yahhh! Do I get a prize? Lol. .......perhaps a Tshirt 'I Sussed Dave 04/2011' (With my luck it would be one of those bloody lcd's he's trying to shift) Looking forward to to the reveal to find out exactly how it was done ;D ;D ;D
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline Mr J

  • Regular Contributor
  • *
  • Posts: 93
    • Facebook mjssvt
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #49 on: April 08, 2011, 01:16:21 am »
Check out my video response www.n1ir.com . Breadboarded multiple times multiple chips and still could not get it to oscillate? Watch video 7 and see me build it up. Might be a ground loop or picking up the mains (50 hz) all I can think of?

 N1IR, Mr J.
 

Offline FreeThinker

  • Frequent Contributor
  • **
  • Posts: 791
  • Country: england
  • Truth through Thought
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #50 on: April 08, 2011, 09:58:50 am »
Reveal has been posted. Nice one!
Machines were mice and Men were lions once upon a time, but now that it's the opposite it's twice upon a time.
MOONDOG
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: EEVblog#160 – 555 Timer Easter Egg?
« Reply #51 on: April 08, 2011, 04:07:42 pm »
I get comments like that all the time!
They wouldn't now what enthusiasm is if it bit them on the arse.
Going by the comments, they also lack a sense of humour.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf