Author Topic: how are pcbs made?  (Read 1736 times)

0 Members and 1 Guest are viewing this topic.

Offline electronics man

  • Frequent Contributor
  • **
  • Posts: 686
  • Country: gb
how are pcbs made?
« on: January 30, 2015, 03:32:28 pm »
i have seen so much on how they are populated (solder past application then pick and place ect) but i haven't seen how the bare pcbs are made. i would love to see how the etching process is carried out and how tiny little vias are made. i would also like to know how multi layer boards are made. does anyone know of any good videos on the process? :-+
follow me on twitter @get_your_byte
 

Offline electronics man

  • Frequent Contributor
  • **
  • Posts: 686
  • Country: gb
Re: how are pcbs made?
« Reply #1 on: January 30, 2015, 03:36:34 pm »
erm i seemed to post this to the wrong board
follow me on twitter @get_your_byte
 

Offline hikariuk

  • Supporter
  • ****
  • Posts: 206
  • Country: gb
Re: how are pcbs made?
« Reply #2 on: January 30, 2015, 04:56:41 pm »
I write software.  I'd far rather be doing something else.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf