Author Topic: eevBLAB #61 - The Demise Of Electronics Australia  (Read 4315 times)

0 Members and 1 Guest are viewing this topic.

Offline EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 37661
  • Country: au
    • EEVblog
eevBLAB #61 - The Demise Of Electronics Australia
« on: March 23, 2019, 10:25:48 am »
The demise of Electronics Australia magazine, the longest running technical publication in the world.
A look at the last ever edition, the heyday, and some early editions that would cause a social justice meltdown today!

 
The following users thanked this post: SeanB

Offline G0MJW

  • Regular Contributor
  • *
  • Posts: 51
  • Country: gb
  • Mike
    • G0MJW
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #1 on: March 23, 2019, 11:28:04 am »
The 70s and 80s were the golden years for these magazines, We never got Australian publications in the UK but I expect the projects were often common. I am surprised Australia's population is big enough the support so much. You must all be engineers.

Mike
Mike
 

Offline vk6zgo

  • Super Contributor
  • ***
  • Posts: 7563
  • Country: au
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #2 on: March 23, 2019, 12:25:54 pm »
I remember picking up the first of the new style " Electronics Lifestyle magazine" EAs.

"Blind Freddie" could see they had got it completely wrong.

The gushing, breathless editorial  was followed by virtually nothing.
OK, if there had been normally unavailable background information about some of the junk they were touting, it might have found a niche market, but it was just readily available "general public" stuff.

Why would would anybody fork out their hard earned cash to read material they could pick up free at Harvey Norman, JB Hifi, or any of a dozen shops.

It was all in line with the  "ideologically correct line" of the times, though.

Technical knowledge was regarded by the non-technical managements as "old hat", with stupid analogies like the one about "Buggy whip manufacturers" being spouted by the morons tasked with preparing us for a "Brave New World" which never eventuated.

Instead, things went off at tangents these "Social Engineers" never anticipated.

Anyway, they can all "Get off my lawn!". >:(
« Last Edit: March 23, 2019, 04:17:56 pm by vk6zgo »
 

Offline johnlsenchak

  • Frequent Contributor
  • **
  • !
  • Posts: 399
  • Country: us
  • js@antihotmail.com
    • paypal.me/johnsenchak
Re: eevBLAB #61 - 'Size Matters"
« Reply #3 on: March 23, 2019, 12:45:26 pm »

Reminds me  a lot  of  Radio  Electronics  magazine  which  pretty much  died in the mid  nineties   here in the United  States
https://en.wikipedia.org/wiki/Radio-Electronics
John Senchak "Daytona  Beach  Florida "
 jls (at)  antihotmail.com   http://www.antihotmail.com
https://www.facebook.com/john.senchak.1
 

Offline wilfred

  • Super Contributor
  • ***
  • Posts: 1246
  • Country: au
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #4 on: March 23, 2019, 12:55:42 pm »
Yeah, The end came quick. That's why so many unsubscribed rather than wait out the end of the subscription. I unsubscribed with 6 months to go. I blamed GC but I sorta knew it wasn't his fault.

Sometimes I take a look back through my copies and it is always interesting to see how fast things were changing technology wise. But in this post Concorde world the rate of change  seems to have started slowing down.
Wouldn't mind seeing a multi-part series of interviews with JR. He must have some stories to tell.
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12288
  • Country: au
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #5 on: March 23, 2019, 01:45:01 pm »
I can still recall learning so much about the Philips K9 chassis from The Serviceman column.  That was a great experience in learning how to think when tracking down faults.  Pity I never had a K9 to work on, but the info was good for how to approach faults in general.

Moffat's Madhouse was a classic.  So many stories and so much craziness - it was great.  I also learned that Gaffer tape was rocket proof.  About to send an experimental rocket up a few miles and realise you'd like to add an extra instrument?  No problem - just tape it to the rocket body and send it off.  If the rocket blows up, simply find the wreckage and note that while the rocket was history, the extra instrument was still being held in place by the tape on a piece of the dismembered body.
 
The following users thanked this post: SeanB

Offline Brumby

  • Supporter
  • ****
  • Posts: 12288
  • Country: au
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #6 on: March 23, 2019, 01:48:22 pm »
I was never a critic of the magazine.  I just wanted my monthly "fix" - but when the direction of the magazine turned south, it just felt wrong.  So very wrong.

I will admit to letting my subscription run to the end in the remote hope that it would come good - but it was not to be.  It was a time of mourning.
 

Offline jonovid

  • Super Contributor
  • ***
  • Posts: 1425
  • Country: au
    • JONOVID
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #7 on: March 23, 2019, 04:33:11 pm »
The 70s and 80s were the golden years for these magazines, We never got Australian publications in the UK but I expect the projects were often common. I am surprised Australia's population is big enough the support so much. You must all be engineers.

Mike
yes 70s and 80s were the golden years for these magazines,  also we did have a lot of engineers  as in the 60s Australia had a space program too. 
Hobbyist with a basic knowledge of electronics
 

Offline vk6zgo

  • Super Contributor
  • ***
  • Posts: 7563
  • Country: au
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #8 on: March 24, 2019, 01:07:32 am »
The 70s and 80s were the golden years for these magazines, We never got Australian publications in the UK but I expect the projects were often common. I am surprised Australia's population is big enough the support so much. You must all be engineers.

Mike
yes 70s and 80s were the golden years for these magazines,  also we did have a lot of engineers  as in the 60s Australia had a space program too.

Yes, & we had large publicly owned (cue "Boo!, Hiss!) communications organisations which trained thousands of Electronics Techs, & employed numerous EEs .
Many of the latter, after finishing their first year or so were taken up as "Cadets" & supported to finish their Degree.

Many top PMG/Telecom Aust EEs started off as 5 year trained Technicians in Training, then after some years in the Tech job, did their Degrees.

As one TAFE Lecturer put it, referring to our defunct Space Program:-
"That's back when we had a real country!"
 

Offline N9XYP

  • Contributor
  • Posts: 19
  • Country: us
Re: eevBLAB #61 - The Demise Of Electronics Australia
« Reply #9 on: March 24, 2019, 01:27:38 am »
Hey Dave,

You (or one of your minions) should get in contact with AmeruicaRadioHistory.com and see if you can help fill in the Australia section. The site is a great resource for history and projects, as well as a massive time suck. Stay away from "Science and Invention"; hard to strop reading and makes you wonder how humans survived the first third of the 20th.  :palm:

He just posted several ETI back issues today.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf