EEVblog Electronics Community Forum

EEVblog => EEVblog Specific => Topic started by: philoupat83 on June 27, 2020, 08:09:45 pm

Title: MiniPro TL866II Plus
Post by: philoupat83 on June 27, 2020, 08:09:45 pm
Hello
 I have a tl866 cs it works very well modify thank you radioman.
my question is: I bought the TL866II Plus in March. it generates a default overcurrent protection .......
whatever the circuit used (example 2716) or test logic ttl.
more possible to send it back to China have you an idea
I precise it is the Xgpro with version 10.15
seen connected and which at the time
of a reading signals disconnected and overcurrent protection .......
thanks
Title: Re: MiniPro TL866II Plus
Post by: philoupat83 on July 02, 2020, 09:16:26 pm
a photo of the problem(http://)
Title: Re: MiniPro TL866II Plus
Post by: philoupat83 on July 02, 2020, 09:17:47 pm
a photo of the problem
(http://)