This is another minor issue with https links send via email:
Prior to "https", the notification links send is complete ("
http://www.eevblog...etc...) and can be clicked-and-go. The new notification links send now is without the "https:" before the "//" looking like ("//www.eevblog...etc...). Depending on the email reader, the old link would click and go, but the new link will go nowhere. Not a big deal, one can always cut&paste that into the address bar. But, I suppose you may want to look into that to make it more inviting.
Actual cut&paste of old and new with bold added to point out the delta.
Old (pre https):
A new topic, 'Malfunctioning kiln controller', has been made on a board you are watching.
You can see it at
http://www.eevblog.com/forum/beginners/malfunctioning-kiln-controller/new/#new
More topics may be posted, but you won't receive more email notifications until you return to the board and read some of them.
Unsubscribe to new topics from this board by using this link:
http://www.eevblog.com/forum/beginners/?action=notifyboard
Regards,
The EEVblog Electronics Community Forum Team.New (after https) - note the missing https in the linksA new topic, 'Who is on crack? Me or the chinese DMM?', has been made on a board you are watching.
You can see it at
//www.eevblog.com/forum/beginners/who-is-on-crack-me-or-the-chinese-dmm/new/#new
More topics may be posted, but you won't receive more email notifications until you return to the board and read some of them.
Unsubscribe to new topics from this board by using this link:
//www.eevblog.com/forum/beginners/?action=notifyboard
Regards,
The EEVblog Electronics Community Forum Team.
Great job! The "http:" prefix is back. Problem gone.
Thanks!
You're welcome, this was due to SMF's inability to handle running either 100% on HTTPS or 100% on HTTP, we had to make a temporary compromise to keep things working while I wrote a patch for SMF to make things work right.