EEVblog Electronics Community Forum
EEVblog => EEVblog Specific => Topic started by: naitek on July 09, 2021, 09:52:05 pm
-
Hey Everyone;
i was so happy to get this programmer thinking all my issues would be resolved, but alas no luck;
--before starting;
all of these bios' are working in the pro/air and they are taken out of;
when trying to dump the file - i get all 0's or all ff's when dumping any of the bios chips
these chips are :
winbond 25q64fv &
'macronix' mxic-mx25l64
maybe i just am unable to read these files or the Tl866II+ is unable to ?
any ideas?
thanks
nai
-
recently done using minipro on mac:
Chip ID mismatch: expected 0xEF4017, got 0x0000 (unknown)
Erasing... 0.41Sec OK
Protect off...OK
Writing Code... 38.39Sec OK
Reading Code... 14.05Sec OK
Verification failed at address 0x0000: File=0xFF, Device=0x00