EEVblog Electronics Community Forum
General => Buy/Sell/Wanted => Topic started by: DeadlyChemist on January 31, 2023, 09:36:50 pm
-
Long story short, I have a VFD display and I would like it into a clock. (there is a story behind the display/clock)
Requirements:
- USB type C input
- battery to keep the time
- good looking case, if 3d printed, sand it or use resin printer or whatever.
- I'm paying max 30€ for shipping, what you pay, I don't care (more below)
Bonus points:
- ability to set the time using a pc (somehow, easily, or heck, add a GPS or smth for stupid winter/summertime)
- very good looking case
The part I supply is in the pictures, there is no board, case, anything except the display and dirt (you need to carefully clean it off)
Pay?
300€, I know, I know, not a lot, the parts should cost you <100€
if you go with fancy case and gps or whatever I can add some money on top
Why don't I do it myself?
- I'm awful at making anything look pretty
- Don't have a desk to work on or even time to work on projects, lately been rollercoaster life :/
- I don't wanna ruin the display, burn it, break it or whatever, sentimental value, please take care.
Pay, 300€, shipping back to me is on you.
(https://media.thechemicalworkshop.com/EEVBlog/Forum/vfdclock1.jpg)
(https://media.thechemicalworkshop.com/EEVBlog/Forum/vfdclock2.jpg)
(https://media.thechemicalworkshop.com/EEVBlog/Forum/vfdclock3.jpg)
(https://media.thechemicalworkshop.com/EEVBlog/Forum/vfdclock4.jpg)
-
Long story short, I have a VFD display and I would like it into a clock. (there is a story behind the display/clock)
Requirements:
- USB type C input
- battery to keep the time
- good looking case, if 3d printed, sand it or use resin printer or whatever.
- I'm paying max 30€ for shipping, what you pay, I don't care (more below)
Bonus points:
- ability to set the time using a pc (somehow, easily, or heck, add a GPS or smth for stupid winter/summertime)
- very good looking case
The part I supply is in the pictures, there is no board, case, anything except the display and dirt (you need to carefully clean it off)
Pay?
300€, I know, I know, not a lot, the parts should cost you <100€
if you go with fancy case and gps or whatever I can add some money on top
Why don't I do it myself?
- I'm awful at making anything look pretty
- Don't have a desk to work on or even time to work on projects, lately been rollercoaster life :/
- I don't wanna ruin the display, burn it, break it or whatever, sentimental value, please take care.
Pay, 300€, shipping back to me is on you.
:-DD
-
I'm sorry, but you're not going to get anyone to do this for 300 Euro. Try 10x-20x that.
-
If it looks like white chalky stuff under the glass on the left edge (with terminals oriented down) then it's FUBAR.
So, I don't think the only part you supply is even in a working state.
I suggest visiting your local thrift store for a VFD clock and modifying that.
-
If you want an equivalent display, a ИВЛ1-7/5 is a couple of euro from Russia (if you can somehow import it).
-
If you want an equivalent display, a ИВЛ1-7/5 is a couple of euro from Russia (if you can somehow import it).
not the point, but one day i might get few and build something with them
If it looks like white chalky stuff under the glass on the left edge (with terminals oriented down) then it's FUBAR.
So, I don't think the only part you supply is even in a working state.
the clock was working (few segments), before i ripped the pcb out because it had many many problems/damage
I suggest visiting your local thrift store for a VFD clock and modifying that.
not the point
-
Dont listen to the naysayers,i'll build it for 300€,just build mind , that dont cover the design fee ,research and development cost ,any software development ,prototyping or materials.
-
What about eBay?
[attachimg=1]
-
If you want an equivalent display, a ИВЛ1-7/5 is a couple of euro from Russia (if you can somehow import it).
not the point, but one day i might get few and build something with them
Well, what is the point? Why does it have to be that particularly dirty VFD instead of an identical new one? Once it's in the case, how would you even know?
Here are some clocks using that type of VFD:
http://www.ebay.com/itm/224042108416 (http://www.ebay.com/itm/224042108416)
If that's not close enough, maybe the seller can customize it, or you might be able to find someone on fiverr.com to build one for you.
-
Well, what is the point? Why does it have to be that particularly dirty VFD instead of an identical new one? Once it's in the case, how would you even know?
sentimental value, and i assume the "seller" aint a dick and won't swap it out, since thats not the point
-
In case you really really want clock with similar display, why just not to get complete clock at least.
Try searching for "elektronika clock" = "часы Электроника" (there might be different spellings of elektronika in listings) on ebay or maybe some other EU platforms in post-USSR countries.
-
He made it very clear yet...
He does not want a different one, a better one, a larger, smaller, wider, greener one...
He wants THAT ONE!
So everytime he looks at it to bring back some sort of past memories or recollection of life events.
Why some engineers are completely insensitive jerks...
-
He made it very clear yet...
He does not want a different one, a better one, a larger, smaller, wider, greener one...
He wants THAT ONE!
So everytime he looks at it to bring back some sort of past memories or recollection of life events.
Why some engineers are completely insensitive jerks...
The one from my grandma is still going strong, cleaned and fixed it (i remember it as a child, im 25), passed to my mom
The one from my father (or grandma?) (long story) is in rough shape because the place was half trashed, half burned, half robbed etc i.e. it's missing all the parts, the display have been in my ownership for 10 years or so, needs a body
If i wanted another clock i would buy one from ebay for 1/3 the price
Thanks for understanding (or not)
I'm not in a hurry either
-
The one shown in the link edavid posted (http://www.ebay.com/itm/224042108416 (http://www.ebay.com/itm/224042108416)) looks very similar. Has the same number of pins as far as I can tell.
You could order one and swap the display yourself.
-
Well, what is the point? Why does it have to be that particularly dirty VFD instead of an identical new one? Once it's in the case, how would you even know?
sentimental value, and i assume the "seller" aint a dick and won't swap it out, since thats not the point
OK, then send your VFD to the eBay seller and ask them to swap it into the clock.
-
Try https://www.bad-dog-designs.co.uk/woodclocks/ (https://www.bad-dog-designs.co.uk/woodclocks/)
-
Try https://www.bad-dog-designs.co.uk/woodclocks/ (https://www.bad-dog-designs.co.uk/woodclocks/)
Aargh, vandals! Who would turn a valuable old Wimshurst machine into a Nixie clock? :o
Their DIY gallery is a horror show of trashed TE too.
-
Try https://www.bad-dog-designs.co.uk/woodclocks/ (https://www.bad-dog-designs.co.uk/woodclocks/)
Aargh, vandals! Who would turn a valuable old Wimshurst machine into a Nixie clock? :o
Their DIY gallery is a horror show of trashed TE too.
Tacky tacky tacky.
The kind of "art" I would make, therefore best aoided.
I wonder whether the voltages on the exposed nixies conform to consumer safety regs.
-
I know :(
I don't really like the Avos, it seems such a strange mashup. But he does offer custom clocks and clearly has expertise.
In general, I don't like uplit Nixies either. I know there's a technical point to it but the mixture of LED and neon does nothing for me. Now, an argon uplighter, that would be OK.
-
I would not recommend sending it outside the Europe Union to not get slapped with taxes. The OP's preference is EU and I think that is the best solution to avoid customs getting involved.
Receiving goods from the UK over a certain value, even if it is a present, will bring customs knocking on your door for tax and customs duty. :palm:
Info for France, but I guess also applies to other European countries.
https://www.frenchentree.com/brexit/posting-items-between-france-and-the-uk-post-brexit-customs-and-duties/ (https://www.frenchentree.com/brexit/posting-items-between-france-and-the-uk-post-brexit-customs-and-duties/)
-
I would buy a similar one on ebay and swap the display.
On the AVO meter nixie clock, I plan to build one. I have all the parts for years... And before you all complain, the AVO is already ruined. It needs a second life!