General > Buy/Sell/Wanted

[Wanted] Affordable desoldering pump station

(1/4) > >>

VEGETA:
Hello,

I need good desoldering pump station (vacuum), but need it to be affordable, preferably below 100$. I appreciate if someone has one he doesn't need and I can pay minimal price + shipping. I open to suggestions.

I see lots of stuff on ebay and amazon but not really knowledgeable if they are good or not.

My usage is very minimal, so no "heavy duty" required. I just need it to suck the solder very well from small through hole vias.


best regards

AVGresponding:
I use a Duratool D00672, I know a few others do too. That should be just about within your budget, especially if you find a used one.

VEGETA:

--- Quote from: AVGresponding on March 10, 2023, 07:09:09 am ---I use a Duratool D00672, I know a few others do too. That should be just about within your budget, especially if you find a used one.

--- End quote ---

I found this one on Amazon: https://www.amazon.com/Digital-Desoldering-Station-Anesty-Professional/dp/B07542D82F/

it seems equivalent to the one you posted.

I am in Jordan so I need something on amazon at best, or maybe other places like ebay but certainly prefer amazon since they deal with customs and local delivery automatically.

I was hoping anyone here can sell his used station for cheap if he didn't need it, any good model will work.

AVGresponding:

--- Quote from: VEGETA on March 10, 2023, 11:13:20 am ---
--- Quote from: AVGresponding on March 10, 2023, 07:09:09 am ---I use a Duratool D00672, I know a few others do too. That should be just about within your budget, especially if you find a used one.

--- End quote ---

I found this one on Amazon: https://www.amazon.com/Digital-Desoldering-Station-Anesty-Professional/dp/B07542D82F/

it seems equivalent to the one you posted.

I am in Jordan so I need something on amazon at best, or maybe other places like ebay but certainly prefer amazon since they deal with customs and local delivery automatically.

I was hoping anyone here can sell his used station for cheap if he didn't need it, any good model will work.

--- End quote ---

Yep, that's the same, they get rebadged with lots of different names. A good quality manual one together with some desolder braid might be a better choice, in the short term.

idk if these are any good, but it seems to be a copy of a Edsyn/Soldapult, Amazon or ebay should protect your money if it's garbage:  https://www.amazon.co.uk/sourcingmap%C2%AE-Desoldering-Soldering-Desolver-Removal/dp/B012TAJKVS

This one looks genuine:  https://www.ebay.co.uk/p/673421665

Black Phoenix:
Another good one is the Engineer SS-02 - https://www.amazon.com/Engineer-SS-02-Solder-Sucker/dp/B002MJMXD4

This is the one I use and the difference is that the tip is basically a piece of silicone tube who is replaceable (a small length of tube is provided with the pump to be cut to size) and by being silicone it can be very close to the iron tip, to the point it almost doesn't leave any gap between the PCB surface and the solder to be sucked, decreasing the lost of suction of the normal pumps.

Navigation

[0] Message Index

[#] Next page