So I have a space issue (like most of us)
added to that I have some toys that have been replaced in my workflow by better, larger, heavier and generally more accurate gear so some of my toys need to find new homes.
Couple to start with but I will add more as I go through the collection. I will add/remove/mark as sold to this first post and link them to new more detailed posts within the thread as needed.
Happy to post gear within Australia via Australia Post (at cost) under 15kg and within reason if you are desperate outside Oz but it won't be cheap. PayPal will be ok or if we sort of know each other then direct deposit is fine too.
Fluke 515A Portable Calibrator (within calibration specs) $400
Protek/ Hang Chang 3502 20Mhz Analogue Scope (calibrated and working well) and new pair of Hantek probes $50
Solartron 7150 Bench 6 1/2 digit DMM (I will warm it up and run some tests against some of my better gear) $150
Fluke 8000A bench DMM (parts or repair candidate) display turns on but is otherwise non functional $80
Feeltech 30 MHz Sig Gen
It actually works great as the PSU was tweaked to remove the floating voltage on the outputs. $?? likely 30'ish.
Fluke 5101B Calibrator is a possible (lack of time for me) but it is really pickup only (or freight if you want to arrange it) and has some issues so a repair item. $400
.... Maybe 4-6 other items to follow. Working Tektronix 453 on a cart (likely a pickup only or I will be in Melbourne in the next month), 2 other analogue scopes (junk or rebuild) and a few more.
I will get each out on the bench over the next few days for pics, operational/functional checks and make a post to suit.
Partial collection