Author Topic: Save me from the junk-yard: Philips PM 3055  (Read 4616 times)

0 Members and 1 Guest are viewing this topic.

Offline DL8RITopic starter

  • Regular Contributor
  • *
  • Posts: 188
  • Country: de
Save me from the junk-yard: Philips PM 3055
« on: January 03, 2014, 09:45:24 am »
Hi,

as mentioned in another thread I have a Philips PM 3055 lying around.
The traces are noisy and the PSU does the "I'm defective"-Humm an SPSU does. Lost interest in repairing it, don't need it, hopefully I get all the small parts together. The Handle is missing.

Cosmetic condition is OK.

I don't want money (except shipping of course), i want to get rid of it.
 

Offline ElektroQuark

  • Supporter
  • ****
  • Posts: 1244
  • Country: es
    • ElektroQuark
Re: Save me from the junk-yard: Philips PM 3055
« Reply #1 on: January 03, 2014, 11:02:45 am »
You have a PM.

Offline DL8RITopic starter

  • Regular Contributor
  • *
  • Posts: 188
  • Country: de
Re: Save me from the junk-yard: Philips PM 3055
« Reply #2 on: January 03, 2014, 11:20:47 am »
Aaaaand it's gone! ;)
 

Offline camallison

  • Contributor
  • Posts: 28
  • Country: gb
Re: Save me from the junk-yard: Philips PM 3055
« Reply #3 on: January 03, 2014, 08:34:33 pm »
Das war aber schnell!   :-+

Colin
Retired Hardware & Software Systems Engineer.

Still learning!
 

Offline ElektroQuark

  • Supporter
  • ****
  • Posts: 1244
  • Country: es
    • ElektroQuark
Re: Save me from the junk-yard: Philips PM 3055
« Reply #4 on: January 03, 2014, 09:52:05 pm »
Ja, es war sehr schnell.
Danke Martin.

(Google translated  :P)

Offline DL8RITopic starter

  • Regular Contributor
  • *
  • Posts: 188
  • Country: de
Re: Save me from the junk-yard: Philips PM 3055
« Reply #5 on: January 04, 2014, 09:33:06 am »
De nada.
TambiƩn Google Translator
 

Online Shock

  • Super Contributor
  • ***
  • Posts: 4213
  • Country: au
Re: Save me from the junk-yard: Philips PM 3055
« Reply #6 on: January 04, 2014, 10:58:18 am »
There are two members on this forum with a PM3055 and PM3065 that need parts from that scope!

VTL (needing one potentiometer)
https://www.eevblog.com/forum/reviews/philips-pm3055-repair-and-teardown/msg82148/#msg82148
and
Shock (me) (needing a few potentiometers,  as I have so far 6 damaged ones but may require spares during the repair)
https://www.eevblog.com/forum/buysellwanted/lfswtb-philips-pm3065-oscilloscope-pots/msg346709/#msg346709

Not sure about VTL and if he still needs one but I'm willing to pay for parts.  I have what otherwise a good working scope (it's for personal use not for sale).
It was a perfect scope until the courier damaged it and made it operationally worthless without these parts. They also burnt me as well over disputing the insurance.

It's a pity Neslekkim did not mention it in this thread instead of mine He updated my thread straight after you posted the giveaway.
« Last Edit: January 04, 2014, 11:23:43 am by Shock »
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 

Offline DL8RITopic starter

  • Regular Contributor
  • *
  • Posts: 188
  • Country: de
Re: Save me from the junk-yard: Philips PM 3055
« Reply #7 on: January 04, 2014, 11:44:31 am »
I'm very sorry, but I only have this one Unit and Philips/Fluke is the only manufacturer I don't have any NOS-Parts for (and no resembling ones).
As for the scope I go for the "first come first serve"-approach everything else would be unfair.
 

Online Shock

  • Super Contributor
  • ***
  • Posts: 4213
  • Country: au
Re: Save me from the junk-yard: Philips PM 3055
« Reply #8 on: January 04, 2014, 01:36:44 pm »
Nah I don't care about your giveaway rules I was just surprised you missed my post, I was on the same page.
Again, I only want roughly 1% of a scope hehehe not a whole scope.  I am willing to pay for it of course.
If someone has some and feels uncomfortable about me giving them money, I'll give it to a worthy charity that supports the destitute.
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Save me from the junk-yard: Philips PM 3055
« Reply #9 on: January 04, 2014, 07:13:01 pm »
It's a pity Neslekkim did not mention it in this thread instead of mine He updated my thread straight after you posted the giveaway.
I updated your thread because I thought you would see it earlier. :(
 

Online Shock

  • Super Contributor
  • ***
  • Posts: 4213
  • Country: au
Re: Save me from the junk-yard: Philips PM 3055
« Reply #10 on: January 05, 2014, 02:33:24 am »
It's a pity Neslekkim did not mention it in this thread instead of mine He updated my thread straight after you posted the giveaway.
I updated your thread because I thought you would see it earlier. :(

The internet stopped working damnit!  Hheheheh :)
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf