Author Topic: MT-200 thermal/sil pad  (Read 2986 times)

0 Members and 1 Guest are viewing this topic.

Offline HooRideTopic starter

  • Regular Contributor
  • *
  • Posts: 72
  • Country: us
MT-200 thermal/sil pad
« on: December 03, 2012, 07:08:43 am »
I've looked just about everywhere and can not come up with a source for a thermally conductive heatsink insulator for MT-200 packages (1x1.5")
I will resort to buying a sheet of the stuff and cutting them to size and drilling holes but that is not terribly cost effective.

Any ideas or sources?

Please enter all complaints legibly in this space -> [  ]
 

Offline Stephenniall

  • Contributor
  • Posts: 29
Re: MT-200 thermal/sil pad
« Reply #1 on: December 03, 2012, 07:00:52 pm »
http://stores.ebay.com/Electronics-Salon/Insulation-Sheet-Bushing-/_i.html?_fsub=285497319

They sell it all. - I assume you are from the US from your flag.

Stephen
 

Offline HooRideTopic starter

  • Regular Contributor
  • *
  • Posts: 72
  • Country: us
Re: MT-200 thermal/sil pad
« Reply #2 on: December 08, 2012, 07:47:46 am »
So I couldn't wait for shipping from Hong Kong so instead I bought a 12x10" sheet of silpad from Mouser and cut 8 of them to size (1x1.5") and punched out the holes.

The 60v+ rail of the amp doesn't short to the case and cook the 10ohm protection resistor every time it's turned on now.  :phew:

If anyone needs some raw silpad material let me know!
Please enter all complaints legibly in this space -> [  ]
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf