FS [US]: Trove of HP/Agilent, Tektronix, Fluke, & Hakko gear **Updated 3/4/22**

[SMB784]

***inventory updated 3/4/22***
 
Howdy everyone, I'm clearing out some surplus equipment that I have acquired over the past couple of years and I wanted to post it here for the community before I just offload it on ebay randos.  I am happy to ship to anywhere at the buyer's expense; I will handle the logistics of packing everything, I also will happily provide free local pickup where I am (DC area, USA. Zip code: 20886).

I have personally used all of this equipment on my own bench, and equipment is in working condition unless otherwise specified; I will happily provide any prospective buyers with photos and tests should they be interested.  All prices are negotiable and in USD.  Please PM with any offers or questions.  The list of what I am parting with is below:

Manufacturer   Model   Qty     Type     Price
HP   E3631A   1   Triple Output DC Power Supply   $250 *** NEW ***
Hakko            FX-888D  1      Soldering Station     $75 $35* (price drop)

* Cat chewed cord near hand piece, fixed with tape.  Still functions.


Previously sold items:
FeelTech   FY6600   1   2CH Arb Gen (with upgraded PSU, TXCO, Op Amps)   $65 *** SOLD ***
HP/Agilent   5316B   1   100-MHz Frequency Counter   $125 (OPT 001, 003: TXCO, 1GHz channel C) ***SOLD***
HP/Agilent   34401A   1   6.5 Digit Multimeter   $225 ***SOLD***
HP/Agilent   E3610A   4   Single Channel Power Supply (PS)   $85/ea ***SOLD***
HP/Agilent   6612C   2   1-Channel System PS   $125/ea ***SOLD***
HP/Agilent   6623A   1   3-Channel System PS   $65 ***SOLD***
HP/Agilent   6624A   1   4-Channel System PS   $75 ***SOLD***
HP/Agilent   6626A   4   4-Channel System PS   $40/ea (2 have broken fans, $30/ea) ***SOLD***
HP/Agilent   5343A   1   26-GHz Frequency Counter   $75 ***SOLD***
HP/Agilent   5086-7822   1   Step Attenuator for HP/Agilent 856x series spectrum analyzer   $75 ***SOLD***
Tektronix   AWG430   1   3-Channel 10 MHz 16 bit 200 MS/s Arb. Waveform Generator   $400 ***SOLD***
Tektronix   CFG250   1   1-Channel 2 MHz Function Generator   $25 ***SOLD***
Wavetek   #270   1 1-Channel 14 MHz Arb. Waveform Generator   $25 ***SOLD***
BK Precision 879B   1   LCR Meter   $80 ***SOLD***
HP/Agilent   33120A   1   15 MHz Function/Arb Generator   $150 ***SOLD***
HP                8563E      1      30Hz -> 26.5GHz Spectrum Analyzer w/ 85620A Mass Memory Module & OPTs 006* 008**   $2500 *** SOLD ***
Fluke           PM2812   1   2CH 60V/10A Power Supply   $125 *** SOLD ***
Tektronix       AFG310   1   1-Channel 16 MHz 12 bit 16 MS/s Arb. Waveform Generatorr   $150 *** SOLD ***
HP/Agilent   66332A   1   Dynamic DC Source   $90 *** SOLD ***
HP   6612C   1   Triple Output DC Power Supply   $125 *** SOLD ***

[CatalinaWOW]

Couple things of interest, but when I checked shipping charges they got uninteresting.  Good luck though.

[SMB784]

In regards to shipping costs, I recommend checking out busfreighter if you are buying heavy items (link here: https://www.busfreighter.com/)

If shipping time isn't a problem and you live near a major city, I have used them before and the service is quite excellent and affordable for heavy things. For example, a 45 pound (~25kg) package from Austin TX to Seattle WA is $73, 25% cheaper than the post office.

[edavid]

I am happy to ship to anywhere if you handle the logistics...

What do you mean by that?  Are you willing to pack the items and drop off at FedEx?

In regards to shipping costs, I recommend checking out busfreighter if you are buying heavy items (link here: https://www.busfreighter.com/)

If shipping time isn't a problem and you live near a major city, I have used them before and the service is quite excellent and affordable for heavy things. For example, a 45 pound (~25kg) package from Austin TX to Seattle WA is $73, 25% cheaper than the post office.

That is not good at all.  FedEx Ground (with my crappy discount) is only $47 for that shipment.

[SMB784]

What do you mean by that?  Are you willing to pack the items and drop off at FedEx?

Yes I am willing to do that.

That is not good at all.  FedEx Ground (with my crappy discount) is only $47 for that shipment.

It scales well with weight, for example 90 pounds is only $10 more. Maybe FedEx is better with an appropriate discount, but when I last checked it was more expensive.

Regardless, I can make whatever shipping method you choose work.

[SMB784]

Updated with new inventory

[CatalinaWOW]

Arrived in excellent shape, working perfectly.

[Zucca]

The price are very attractive. If you can investigate if the units could work with 220VAC mains, maybe some european not america buyers could organize a group buy.

[Sigurd]

What a treasure trove, I would be like a kid in a candy store if I lived in the USA!

Some ebay sellers have fairly reasonable shipping costs from the USA, but I am yet to discover whether or not they are real - lots of reports of smashed items.

[SMB784]

The price are very attractive. If you can investigate if the units could work with 220VAC mains, maybe some european not america buyers could organize a group buy.

All of the units that I have looked at carefully so far have the logo I attached in this post, which I believe means they are mains voltage agnostic (i.e. can accept 120 or 240 without modifications). Maybe I'm wrong, but someone should check me.

Also I have added my shipping zip code in the original post so that people can calculate their own shipping costs instead of having to wait for me.

[Sigurd]

For 66332A/663xB you need to change the fuse and modify the transformer, page 69
https://www.matsolutions.com/Portals/0/Product%20documents/Agilent%20Technologies/6631B/6631B%20User%27s%20Guide.pdf


For 662xA there is a voltage selection card, instructions on page 113
https://literature.cdn.keysight.com/litweb/pdf/5957-6377.pdf

HPAK used spade terminals on transformers and jumpers on other models. Check the user guide before you buy.

[SMB784]

Thank you, sigurd.

I have also determined that the Agilent E3610A power supplies are 120V only unless modifications are made.

[SMB784]

Bump with updated inventory

[rsjsouza]

I received the Wavetek 275 and shipping was lightning fast and well packed. Frequency is a bit off (just an adjustment) but otherwise it is in excellent condition! Thank you!

[SMB784]

I received the Wavetek 275 and shipping was lightning fast and well packed. Frequency is a bit off (just an adjustment) but otherwise it is in excellent condition! Thank you!

Glad you like it, thanks!

[profanum429]

My new-to-me E3610A showed up today, works great!

[SMB784]

My new-to-me E3610A showed up today, works great!

Great, glad you like it!

For everyone else:

I have updated the main post to reflect some new inventory and updated quantities on existing inventory.

[SMB784]

Bump with updated item information, description for all items.

[AsteroidsOnSteroids]

Pm sent

[SMB784]

Updated inventory

[Tony_G]

I was lucky enough to grab the 5343A from Sean. If you're interested I did a video overview of it here:



TonyG

[SMB784]

Thanks Tony! I'm glad the primary 26GHz input still works well. Keep me updated on what else you discover!

For those of you following this thread, I have updated the inventory to reflect recent sales.

[Tony_G]

NP - Should also add that Sean did a great job in answering my questions and then sending the unit - To go all old school "Great experience, would buy again"...

TonyG

[SMB784]

Inventory Updated

[SMB784]

Sold the last of the E3610 Power supplies today, still lots of great stuff available though! Prices reduced on select items too!