Author Topic: Franky's sales thread  (Read 213869 times)

0 Members and 1 Guest are viewing this topic.

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #125 on: July 28, 2014, 11:14:06 pm »
Franky do you sell a 4mm adaptor which has single male one end and double female the other so you can plug 2 test leads in to one binding post ?

No. I can have a look around to see if they are available anywhere. Or as con-f-use says, you can just stack up the plugs.
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #126 on: July 28, 2014, 11:20:39 pm »
Hi Franky, how much it costs the PL-50 feed through termination that is shown in the last video of mjlorton.

I'm pricing them at $22 each shipped worldwide ($2.4 additional for tracking). They are made by Rigol. This is the same product (not my link): http://www.tekequip.com/rigol-impedance-adjuster-50-ohm.html
« Last Edit: July 29, 2014, 01:52:34 am by iloveelectronics »
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline Flump

  • Frequent Contributor
  • **
  • Posts: 500
  • Country: gb
Re: Franky's sales thread
« Reply #127 on: July 28, 2014, 11:35:51 pm »
I have not found any decent unshrouded stackable plugs i like, and don't want to replace the decent plugs on my best leads with crap stackable ones , hence looking for a " splitter "
 


Offline Flump

  • Frequent Contributor
  • **
  • Posts: 500
  • Country: gb
Re: Franky's sales thread
« Reply #129 on: July 29, 2014, 12:26:00 am »
thanks for the link pickle but they dont half  look crap, sorry  :-DD
 

Online Monkeh

  • Super Contributor
  • ***
  • Posts: 5883
  • Country: gb
 

Offline pickle9000

  • Super Contributor
  • ***
  • Posts: 2132
  • Country: ca
Re: Franky's sales thread
« Reply #131 on: July 29, 2014, 12:36:16 am »
thanks for the link pickle but they dont half  look crap, sorry  :-DD

They certainly do, but that is that the general idea?

I just use a small box with 4 females on it. Somehow that does not sound right.
 

Offline Flump

  • Frequent Contributor
  • **
  • Posts: 500
  • Country: gb
Re: Franky's sales thread
« Reply #132 on: July 29, 2014, 12:42:11 am »
I just use a small box with 4 females on it. Somehow that does not sound right.

 :wtf: 
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #133 on: July 29, 2014, 01:50:41 am »
I have not found any decent unshrouded stackable plugs i like, and don't want to replace the decent plugs on my best leads with crap stackable ones , hence looking for a " splitter "

Here's another type of unshrouded stackable banana plugs/test leads I have (but haven't yet been listed in my shop). They were shown briefly in Martin's latest video at about the 9:00 minute mark.

One thing to note about them is that the wires are screwed on, not soldered.
« Last Edit: July 29, 2014, 01:56:39 am by iloveelectronics »
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline Flump

  • Frequent Contributor
  • **
  • Posts: 500
  • Country: gb
Re: Franky's sales thread
« Reply #134 on: July 29, 2014, 06:16:49 am »
how long are the probe bits, from the end of the plastic to the tip of the metal ?
they look similar to the plugs on the grabber hook leads you send me ?
also do they except shrouded plugs in the back end ?
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #135 on: July 29, 2014, 08:29:10 am »
how long are the probe bits, from the end of the plastic to the tip of the metal ?

It's slightly shorter than normal, measuring about 17.5mm.

Quote
also do they except shrouded plugs in the back end ?

No they don't. Only unshrouded plugs.
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline mzzj

  • Frequent Contributor
  • **
  • Posts: 794
  • Country: fi
Re: Franky's sales thread
« Reply #136 on: July 30, 2014, 09:53:52 am »
Hello Franky,

Is it possible for you to source (gold plated) banana plugs with this sort of spring contacts:
http://www.nakamichiplug.com/pic/0534D-001.jpg

doesn't need to be with metal shells, would actually prefer just normal black&red plastic shells.

In my experience this type of spring contact has been far better than anything else for reliable and low contact resistance.  I bought these couple of years ago from Chinese-run electronics shop in Bangkok for very reasonable price but haven't been able to find them anywhere else.
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1303
  • Country: no
Re: Franky's sales thread
« Reply #137 on: July 30, 2014, 10:12:25 am »
there are lots of them on ebay.. same one..
but with the metal shell.. http://www.ebay.com/itm/181159774974
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #138 on: July 30, 2014, 12:08:37 pm »
Hello Franky,

Is it possible for you to source (gold plated) banana plugs with this sort of spring contacts:
http://www.nakamichiplug.com/pic/0534D-001.jpg

doesn't need to be with metal shells, would actually prefer just normal black&red plastic shells.

In my experience this type of spring contact has been far better than anything else for reliable and low contact resistance.  I bought these couple of years ago from Chinese-run electronics shop in Bangkok for very reasonable price but haven't been able to find them anywhere else.

So basically something like this but gold plated? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=171030386766
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline mzzj

  • Frequent Contributor
  • **
  • Posts: 794
  • Country: fi
Re: Franky's sales thread
« Reply #139 on: July 30, 2014, 12:30:47 pm »
Hello Franky,

Is it possible for you to source (gold plated) banana plugs with this sort of spring contacts:
http://www.nakamichiplug.com/pic/0534D-001.jpg

doesn't need to be with metal shells, would actually prefer just normal black&red plastic shells.

In my experience this type of spring contact has been far better than anything else for reliable and low contact resistance.  I bought these couple of years ago from Chinese-run electronics shop in Bangkok for very reasonable price but haven't been able to find them anywhere else.

So basically something like this but gold plated? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=171030386766
Exactly!
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #140 on: July 30, 2014, 12:52:57 pm »
So basically something like this but gold plated? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=171030386766
Exactly!

I believe I have bought what you're looking for before but wasn't happy with the quality. Perhaps I can try again and see if I can source something better. Will update you if I find anything.
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline sonny

  • Contributor
  • Posts: 13
Re: Franky's sales thread
« Reply #141 on: July 31, 2014, 08:26:50 pm »
I'm very happy with my second purchase from Franky. Thank you again. :-) I'm waiting to see your online sore open. :-)
 

Offline shailesh3t

  • Regular Contributor
  • *
  • Posts: 50
  • Country: mu
Re: Franky's sales thread
« Reply #142 on: August 02, 2014, 12:33:56 pm »
Hi am  a regular customer of Franky, bought some nice products from him such as Rigol power supply, frequency generator and oscillocope, he is a nice seller keep it up
regards
shailesh from Mauritius
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #143 on: August 02, 2014, 02:47:20 pm »
I'm very happy with my second purchase from Franky. Thank you again. :-) I'm waiting to see your online sore open. :-)

Hi am  a regular customer of Franky, bought some nice products from him such as Rigol power supply, frequency generator and oscillocope, he is a nice seller keep it up
regards
shailesh from Mauritius

Thank you sonny and shailesh! Your businesses are very much appreciated!
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread - UT61E
« Reply #144 on: August 02, 2014, 02:51:22 pm »
I currently have 2 sets of Uni-T UT61E available for sale. As many of you know I used to stock these but not anymore. I got these 2 sets while custom ordering one for another customer (just so I can lower the average shipping cost). Price is $51 for the USA and $53 for everywhere else, shipping with tracking number included. Please post here or PM me if interested. First come first serve.
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline PedroDaGr8

  • Super Contributor
  • ***
  • Posts: 1278
  • Country: us
  • A sociable geek chemist
Re: Franky's sales thread
« Reply #145 on: August 03, 2014, 02:31:13 am »
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!
The very existence of flamethrowers proves that some time, somewhere, someone said to themselves, "You know, I want to set those people over there on fire, but I'm just not close enough to get the job done." -George Carlin
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread
« Reply #146 on: August 03, 2014, 03:10:40 am »
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!

Yes, I have. Will post some pictures later later today when I get back to the shop. I am still way behind in posting a lot of the stuff I already have in stock...
My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 

Offline PedroDaGr8

  • Super Contributor
  • ***
  • Posts: 1278
  • Country: us
  • A sociable geek chemist
Re: Franky's sales thread
« Reply #147 on: August 03, 2014, 04:48:31 am »
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!

Yes, I have. Will post some pictures later later today when I get back to the shop. I am still way behind in posting a lot of the stuff I already have in stock...

Great news! Haha, I know how that is. You almost need another vacation just to recover from all of the catchup you are playing after your previous vacation. Take your time mate. It's no rush.
The very existence of flamethrowers proves that some time, somewhere, someone said to themselves, "You know, I want to set those people over there on fire, but I'm just not close enough to get the job done." -George Carlin
 

Offline shailesh3t

  • Regular Contributor
  • *
  • Posts: 50
  • Country: mu
Re: Franky's sales thread
« Reply #148 on: August 03, 2014, 09:42:59 am »
Hi franky,
kindly let me know if you have some dummy loads- electronic controlled

regards
shailesh
 

Offline iloveelectronics

  • Frequent Contributor
  • **
  • Posts: 937
  • Country: hk
Re: Franky's sales thread - Kelvin Clips kit
« Reply #149 on: August 03, 2014, 09:43:39 am »
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!

OK, here's what I've got. It's a kit, so you will need to do some soldering and heat shrinking. Which may be more work, but you get to control the quality of the soldering and assembly work. You can also customise the length of the wires.

The kit comes with a pair of good quality gold plated kelvin clips, 4 pieces of 13AWG silicone wires each about 60cm long (2 black + 2 red), a pair of black and red heat shrink tubing, and 2 pairs of banana plugs (choice of either shrouded or unshrouded).

Price on the forum would be $19 per set worldwide shipping included (without tracking). Tracking would be an additional $2.4.

My email address: franky @ 99centHobbies . com
My eBay store: http://stores.ebay.com/99centhobbies
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf