Author Topic: FS [UK]: Fluke 89IV - SOLD  (Read 1200 times)

0 Members and 1 Guest are viewing this topic.

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 886
  • Country: gb
FS [UK]: Fluke 89IV - SOLD
« on: October 05, 2019, 12:37:50 pm »
Last one in this series of departing meters, this is a Fluke 89IV in good working condition, as per the pictures.
The meter has a few small dents / scratches in the rubber of the outer case but, otherwise, it looks nice and clean.

I should also point out the meter has recently had the supercap replaced with a brand new Panasonic EECS0HD334H.

Asking price is £150 plus shipping.
« Last Edit: October 10, 2019, 10:41:12 pm by giosif »
 
The following users thanked this post: sn4k3

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 886
  • Country: gb
Re: FS [UK]: Fuke 89IV
« Reply #1 on: October 05, 2019, 12:38:28 pm »
A few more photos...
 

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 886
  • Country: gb
Re: FS [UK]: Fuke 89IV
« Reply #2 on: October 09, 2019, 08:04:52 am »
Bump.
 

Offline Electro Detective

  • Super Contributor
  • ***
  • Posts: 2715
  • Country: au
Re: FS [UK]: Fuke 89IV
« Reply #3 on: October 09, 2019, 08:48:17 am »

Mate, you might flog it a lot faster by changing the post title from "Re: FS [UK]: Fuke 89IV"

to something like  "Re: FS [UK]: Fluke 89IV"

Good luck  :-+
 
The following users thanked this post: giosif

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 886
  • Country: gb
Re: FS [UK]: Fluke 89IV
« Reply #4 on: October 09, 2019, 02:30:37 pm »
Haha... That is a good one.
Thanks for pointing it out!
 

Offline sn4k3

  • Frequent Contributor
  • **
  • Posts: 428
  • Country: pt
Re: FS [UK]: Fluke 89IV
« Reply #5 on: October 09, 2019, 03:04:20 pm »
Can we know the firmware version? And if it suffer from 5V range settle?
Shipping to Portugal?
« Last Edit: October 09, 2019, 03:09:59 pm by sn4k3 »
 

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 886
  • Country: gb
Re: FS [UK]: Fluke 89IV
« Reply #6 on: October 10, 2019, 09:01:05 pm »
Sorry for the late response (extra busy days)!

Firmware is 2.02 and I've just checked and it doesn't suffer from the 5VDC range settle problem.
Shipping to Portugal... Possibly.
The shipping cost estimate for Portugal is £18.
 

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 886
  • Country: gb
Re: FS [UK]: Fluke 89IV - SOLD
« Reply #7 on: October 10, 2019, 10:41:26 pm »
This is now sold.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf