General > Buy/Sell/Wanted

SOLD (UK): TIME Electronics V, I, R calibrator 0.01%

(1/1)

TopLoser:
Another customer return, my little mind suspects they've used it for a while to calibrate all their kit and then returned it. Bless em. Looks and behaves like it was new.

TIME ELECTRONICS - 1017 - CALIBRATOR, VIR

DC Volts 10nV to 100V
DC Current 100nA to 100mA
Resistance 0.01R to 10k
0.005% (50ppm) accuracy
1 ppm setting resolution
Noise < 2ppm (0.1 to 1Hz)
Stability <5ppm/day <25ppm/yr
The 1017 is a high performance portable DC calibrator for use in the field or laboratory.
Five DC voltage ranges from 10mV to 100V full scale are available, each with a 6-digit (1ppm) resolution. The DC current range is 100mA full scale with a 100nA (1ppm) resolution. Resistance from 0.01R to 10k is available 0.01R steps.
The voltage, current and resistance ranges make it suitable for calibrating a wide range of transducers, from thermocouples, 4-20mA and 0-10V transmitters, to Platinum Resistance Thermometers, all in the same instrument.
Mains or rechargeable battery. Battery operation enables good performance where earthloop and noise pick-up occurs.
Stability v Temperature and Time Outstanding performance is due to the use of special computer selected reference diodes and the latest in resistor technology. The s
pecial low-thermal emf terminals reduce errors when working with microvolt signals.
Digital Deviation Control allows the output to be increased/decreased in % terms from 0 to +/-0.999%. This provides a direct read-out of error and simplifies the recording results for calibration certificates. It enables the user to immediately see if the unit under test is within specification.

http://uk.farnell.com/time-electronics/1017/calibrator-vir/dp/5063231
http://www.farnell.com/datasheets/410065.pdf

List price £1290 + VAT, looking for £675 + VAT.

Will ship anywhere, VAT invoice supplied, can supply zero rated to EU buyers with a valid VAT number and zero rated to buyers outside the EU.

Quite liked seeing the reading of my 2015THD on the 10K setting!

SOLD, THANK YOU

SeanB:
Can we all club together to send it to Dave?

TopLoser:
Calibrator is now SOLD, thank you

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod