Author Topic: (Sold) Wamco KW-104S minitron displays (filament 7 segment) X3  (Read 576 times)

0 Members and 1 Guest are viewing this topic.

Offline adriansmith31Topic starter

  • Contributor
  • Posts: 32
  • Country: gb
    • Adrian's Electronics Blog
I have three Wamco KW-104S aviation grade 7 segment displays which are typically used in avionics such as radios. They are used but have been tested and work great with no burned segments and dead spots on the filaments. The manufacturer calls them "minitron" displays which are in a nutshell filament 7 segment displays in a plug in module package similar to 0.3" LED displays however the pin spacing is non standard.

Data sheet here https://wamcoinc.com/assets/pdf/Display%20Catalog.pdf

Make me an offer for them or I can sell via eBay if you prefer as this makes international shipping and customs much easier. They are currently listed on eBay so if you would like to purchase them that way I can give you the link. Otherwise we can sell directly.

Note in order to take a good photo of them working I turned down the voltage as they were too bright overexposing the camera.
« Last Edit: April 21, 2024, 09:48:55 pm by adriansmith31 »
My YouTube channel - electronics and oddball equipment teardowns https://www.youtube.com/channel/UC-teLYZizQoOEJiQiu0QTzQ

Blog https://www.adrian-smith31.co.uk/blog
 

Offline adriansmith31Topic starter

  • Contributor
  • Posts: 32
  • Country: gb
    • Adrian's Electronics Blog
Re: FS: (UK) Wamco KW-104S minitron displays (filament 7 segment) X3
« Reply #1 on: April 21, 2024, 09:47:00 pm »
These have now been sold
My YouTube channel - electronics and oddball equipment teardowns https://www.youtube.com/channel/UC-teLYZizQoOEJiQiu0QTzQ

Blog https://www.adrian-smith31.co.uk/blog
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf