Author Topic: FS [US, shipping or local pickup Boston] vintage test equipment / tools  (Read 1795 times)

0 Members and 1 Guest are viewing this topic.

Offline D StraneyTopic starter

  • Regular Contributor
  • *
  • Posts: 180
  • Country: us
Helping a friend clear out some old equipment from his R&D operation, thought I'd see if anyone here was interested.  Shipping boat anchors without damage is a massive pain and something I honestly just don't have time for, so this is for pickup only - I'm in the Boston metro area. I can ship the Eico frequency generator and the Keithley if you pay for shipping (likely somewhere in the ballpark of ~$20 via USPS); the CRT scope is too heavy/delicate for that so this one is for local pickup only in Cambridge, MA.

Seriously vintage, for restoration etc.:
  • Eico Model 360 TV-FM Sweep Signal Generator - tube-based; untested: $20 (+shipping)

Tools:
  • Automotive Radio Shack soldering iron (Cat. # 64-2105), 30W 12V with a cigarette lighter plug; pretty old, untested, tip is lightly used: $5 (+shipping)
    See attached photos

Unusual:
  • Keithley 740 System Scanning Thermometer, with 7402 mux card - powers on and responds to keypresses, don't have the time etc. to figure out how to fully test it: $20 (+shipping)
  • HP 5182A Waveform recorder/generator - shows "Err14.00" on display on power-up: $40

Oscilloscope(s):
  • Hitachi V-212 Analog CRT oscilloscope, 20 Mhz - tested, works fine: $40, local pickup only

Power supplies:
  • Eventek KPS3010D bench supply, 0-30V 0-10A - voltage reading is low by 0.2V but seems to work correctly otherwise: $20
  • Tektronix PS 5010 & TM 5003, Bench supply with dual tracking outputs (0 to ±32V 1.6A) + fixed logic output (5V 3A), inside TM 5003 rack - works fine: $60
  • Lambda LMS-7040 DC power supply 0-40V 7A, adjustable with trimmers (meant for fixed use, not a lab bench supply) - works fine: $60
  • HP 62024E DC power supply ±24V 3.75A - untested: $20
« Last Edit: December 01, 2023, 12:59:03 am by D Straney »
 

Offline D StraneyTopic starter

  • Regular Contributor
  • *
  • Posts: 180
  • Country: us
Re: FS [US, shipping or local pickup Boston] vintage test equipment
« Reply #1 on: August 16, 2023, 07:17:26 pm »
Updated for availability / willingness to ship.

Here's some photos, especially of the Eico freq. sweep generator:

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 5713
  • Country: ca
Re: FS [US, shipping or local pickup Boston] vintage test equipment
« Reply #2 on: August 17, 2023, 02:39:09 am »
pm ed you for the Keithley 740 System Scanning Thermometer
 

Offline D StraneyTopic starter

  • Regular Contributor
  • *
  • Posts: 180
  • Country: us
Re: FS [US, shipping or local pickup Boston] vintage test equipment / tools
« Reply #3 on: December 01, 2023, 12:58:50 am »
Added 12VDC soldering iron

Offline Stray Electron

  • Super Contributor
  • ***
  • Posts: 2028
Re: FS [US, shipping or local pickup Boston] vintage test equipment / tools
« Reply #4 on: December 01, 2023, 03:02:49 am »
  I'm too late for any of the GOOD stuff!   :(
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf