EEVblog® Electronics Community Forum

General => Buy/Sell/Wanted => Topic started by: picitup on October 24, 2019, 12:56:10 pm

Title: SOLD: (worldwide) Kingst Logic Analyser 16CH 200MHz 1Gb RAM +-50v inputs PWM 1p
Post by: picitup on October 24, 2019, 12:56:10 pm

Hi All

I have a brand new one that's surplus to requirements on eBay, going off at 20:00 GMT for 1p tonight here:

https://www.ebay.co.uk/itm/264509612291 (https://www.ebay.co.uk/itm/264509612291)

The basic specs are:

• 200Msa @16CH continuous
  1Gbit on board RAM
  Compression around 10:1 (run length encoding)
  Range of I/O threshold voltages from 0.9v to 5v and custom.
  2x PWM outputs, controllable in software
  Free software at http://www.qdkingst.com/en/download (http://www.qdkingst.com/en/download)
  SDK for custom drivers
  Generous input protection for +50v to -50v!
  Can be used with on board ram or direct via USB for longer samples
  Silicone super flexible Dupont cables and USB cable
  Expected to be supported in the future by PulseView (https://sigrok.org/wiki/Kingst_LA2016 (https://sigrok.org/wiki/Kingst_LA2016))
  

For more detail visit http://www.qdkingst.com/en/products (http://www.qdkingst.com/en/products) and http://www.qdkingst.com/en/download (http://www.qdkingst.com/en/download)

Cheers

Steve

Title: Re: FS: (worldwide) Kingst Logic Analyser 16CH 200MHz 1Gb RAM +-50v inputs PWM 1p
Post by: picitup on October 31, 2019, 12:13:20 pm

Hi all

The auction is finishing tonight just after 19:00 GMT.

Come and get it while it's hot!  ;D