Author Topic: ESD Mat Dual Layer 900mm X 10M Blue as used by dave  (Read 3648 times)

0 Members and 1 Guest are viewing this topic.

Offline njkmontyTopic starter

  • Contributor
  • Posts: 43
  • Country: au
ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« on: September 07, 2015, 10:13:30 pm »
I was thinking of buying a 10m roll but only need about 3.6m,   ESD Mat Dual Layer 900mm X 10M Blue as used by dave

was wondering if there were other people who wanted to buy the remaining
piece /pieces?



http://www.oritech.com.au/productDetail.aspx?productID=20510&name=ESD-Mat-Dual-Layer-900mm-X-10M-Blue
 

Offline tooki

  • Super Contributor
  • ***
  • Posts: 15568
  • Country: ch
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #1 on: September 08, 2015, 11:35:50 am »
I'm on the wrong continent and whatnot, but what about either saving it for later refurbishment (I suppose these surfaces don't last forever), or misusing the rest as a floor mat?

I could also envision using it as shelf liner for projects in progress. Expensive, yes. But think of the nerdgasm value: "I have static safe shelves!!>:D
 

Offline Psi

  • Super Contributor
  • ***
  • Posts: 12355
  • Country: nz
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #2 on: September 08, 2015, 11:46:19 am »
mektronics sell it in any length you want. Just have to ask.
I got the exact length needed for my bench from them, 1.6m

They also have the earthing plug/clip kit for a small amount more.
« Last Edit: September 08, 2015, 11:49:59 am by Psi »
Greek letter 'Psi' (not Pounds per Square Inch)
 

Offline njkmontyTopic starter

  • Contributor
  • Posts: 43
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #3 on: September 08, 2015, 12:22:44 pm »
mektronics sell it in any length you want. Just have to ask.

really?

is it the same stuff? different brand etc? same quality?
 

Offline David_AVD

  • Super Contributor
  • ***
  • Posts: 2951
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #4 on: September 08, 2015, 09:04:26 pm »
I bought a 10m roll of that matting, but was a little disappointed with it.  It's ok, but not fantastic.

The last few metres of the roll were very rippled and still hasn't flattened out completely, even after months on a spare bench.
 

Offline njkmontyTopic starter

  • Contributor
  • Posts: 43
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #5 on: September 09, 2015, 01:28:12 am »
do you have any other suggestions recommendations?
 

Offline David_AVD

  • Super Contributor
  • ***
  • Posts: 2951
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #6 on: September 09, 2015, 02:41:15 am »
Not really.  Since it's on all of our benches now I didn't bother looking at other types.
 

Offline mairo

  • Supporter
  • ****
  • Posts: 230
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #7 on: September 09, 2015, 11:43:37 am »
Hi njkmonty,
I am also interested in the one from Oritech. I am after 4m. They are currently at ElectroneX, will check if they have any 'specials' :)

Where in AU are you from?
 

Offline Shock

  • Super Contributor
  • ***
  • Posts: 4439
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #8 on: September 09, 2015, 12:09:21 pm »
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 

Offline njkmontyTopic starter

  • Contributor
  • Posts: 43
  • Country: au
Re: ESD Mat Dual Layer 900mm X 10M Blue as used by dave
« Reply #9 on: September 09, 2015, 10:24:57 pm »
Im from Queensland, halfway between brisvegas and gold coast
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf