FS: Rohde & Schwarz CMU200 tested parts and modules

[RF_fanatic]

After years of repairing multiple Rohde & Schwarz CMU 200 units I have decided to stop doing this I am cleaning up my shack of working and tested parts and spareparts.

Units are all tested in a reference test CMU200 unit in order to check and are working including the signal path, meaning if you would use the parts or modules as replacement of a defective part or unit than yours will be working again.

Please contact me if you need one or more, or even the complete bulk, I will ship within europe.

If also have some defective parts, clearly indicated in below listing:

Tested OK:
* Digital modules (some with and some without U65 option) all without 1100.2500 module allthough I do have some 1100.2500 if you want with bad audio respons)
* Displays
* PCMCIA card
* FMR6 processor units
* FMR5 processor unit
* Fronts of CMU200 in perfect condition
* Power supplies
* Hard disks with reference image
* B41 audio module
* B12 > stable clock
* Reference board
* MCX cables
* internal Power supply cables
* internal ethernet cables
* B21 signaling units
* B52, B54,B56, B68,B66 units (in various configurations)

And defective:
* Power supplies
* 1100.2500.02 modules (audio response not correct)
* 1100.2130.03 modules (very bad signal respons)
* 1100.3220.02 modules

[RF_fanatic]

For some reason it seems I cant upload files.. second try :

[RF_fanatic]

some more

[bdunham7]

I might be interested in the B41 module, and I'm curious about the B12 module--how much more stable is it compared to B11?

[RF_fanatic]

I might be interested in the B41 module, and I'm curious about the B12 module--how much more stable is it compared to B11?

sorry shipment only within europe as mentioned in first post

[Djil]

Hello,

Best wishes for health and happiness!

What is the expected price for this type of item: Hard disks with reference image.

Best regards
Djil
(France)

[RF_fanatic]

Hello,

Best wishes for health and happiness!

What is the expected price for this type of item: Hard disks with reference image.

Best regards
Djil
(France)

45 euro including the support plate and cable

[esoteq]

Hi,
does the reference image work with any modules installed ?

[michaculix]

Hi, I'd be interested in an FMR6, sent you a pm.

[vaualbus]

I send you a PM,
best regards

[Bravo]

Hi,
Do you still have the front panel rubber buttons? If so, how much are they ?
I presume this is what is worn when the bottom row buttons under the screen need a really hard push to make them work ?
Best regards,

[HFG]

Hi,
Send you PM.
Best regards