Wanted: FF0290SS1 connector for Owon scope.

[satanistik]

I need 90pin connector FF0290SS1 for Owon scope display. It's out of stock in any shop but I can't found any replacement.

[coromonadalix]

Classified as obsolete at JAE

CONN FPC BOTTOM 90POS 0.30MM

https://www.ebay.com/itm/CONN-FPC-BOTTOM-90POS-0-30MM-R-A/124212296734

https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/FH30-90S-0-3SHW-98/4283755

Hirose  FH16-90S-0.3SHW(05)  ??

https://eleparts.co.kr/goods/view?no=3122569

[satanistik]

I try FH30-90S-0.3SHW(05) but first - pins have another lenght, if I solder one side, second can't be soldered. I solder it using som wires but it's some difference between flex pads, mowing connector inside socket, I have sometime picture, lines or short.

[satanistik]

Finally, I found this connector and LCD in Compaq 36xx palm, only information i can found is single forum topic when someon have this type of display and writing about use it in project,( I think it's worse to use display on the world, need external IC and 90pin connector), and say something about Compaq palm. After few hours spend on Google graphics, searching PDA boards, I found compaqu 38xx having similar display resolution and 90pin connector, but it's mis, connector is similar but can't be use. Finally in 36xx series I found identical display and connector.