FS USA (will ship): Measurement Stuff (Free Scope,gone) Kikusui 100 MHz added

[watchmaker]

[Clearing out the cabinet. 

Added my Kikusui COS5100 w/ COS 5060A Service Manual.  Excellent condition   $125 plus shipping.  I found my forever scope 

This is the closest SM I could find and it cost me $35.  It is "close enough" and I marked the VRs on the boards that relatedto the instructions.  Some are different references than the schematic, but I got there.  I actually prefer the graticules to my forever scope (a BK1590/Trio 2100) but the BK is more intuitive for my mind.  These things are like any tool, it is a fit to your personality.

Has Time delay for precise measurements.  This helped me learn how to use my Siglent.

Anyway, all switches, pots and attenuators are clean(ed) and function smoothly.  I have the handle somewhere I think). Power cord, no probes.




Item 1:  Excellent Ersa Icon-1 Power supply.  Unlocked. No cord.  $60???   Thought it would work with Tech Tool. Does not.

Item 2:  Weller Solderinng station with new handle and repaired one, 6 tips. Used this mainly in my watch shop for sellacking jewels.  Replaced with Ersa Tech Tool.  $50  (New handle cost me that)  SPoken for

Item 3:  Fluke 45. No leads, no cords,  All functions work correctly.  $100 Spoke for

Item 4:  Heathkit Retro Transistor Tester  Works well, all functional tests are good. Limited to gain of 300.  But, with external supply you can supply collector voltage up to 50V.  $75??
(
Item 5: BK 20 MHz function/Sweep Generator/Counter.  All functions work.  $65 (Pics will be in second post.) Spoken For

Shipping is charged actual cost.

As usual, no deal is finished until you are happy with what is sent.

If anyone can use an Agilient 54621A 60 MHz, 2 channel scope for the cost of shipping let me know.  Picked up









[ Specified attachment is not available ]

[watchmaker]

BK Pics.

[W4PJB]

Interested in the Weller soldering station. Where are you located?

[watchmaker]

In NH.  Sent you a PM.

[DiodeDipShit]

Hi WatchMaker, I am interested in the  Agilient 54621A 60 MHz, 2 channel scope as I have always wanted an oscilloscope. I live in Massachusetts, Kind regards, Eric

[watchmaker]

Hey Eric,

I am just over the border.  DO you want to come get it?

Regards,

Dewey

[DiodeDipShit]

Hi Dewey, I could do that and buy some fireworks in the same trip ! !  (actually I still have quite a few Festival ball twelve packs) My neighbors complained about the last barrage my Sons and I sent up, so we had to shut down early..... hurry up 4th of July ! ! !
 I am north of Worcester. Is there some electronics components that You are interested in return? I have a lot of 1960-1970's stuff.
Best regards, Eric

[4fl0w]

Is the Weller soldering station still up for grabs? I've been looking at getting a soldering station.

[watchmaker]

Hi Dewey, I could do that and buy some fireworks in the same trip ! !  (actually I still have quite a few Festival ball twelve packs) My neighbors complained about the last barrage my Sons and I sent up, so we had to shut down early..... hurry up 4th of July ! ! !
 I am north of Worcester. Is there some electronics components that You are interested in return? I have a lot of 1960-1970's stuff.
Best regards, Eric

Eric,

You are a gentleman.  I cannot think of anything I need but you might have some thoughts when you see my setup.  I am sending you  a PM.

[watchmaker]

I need to check on if someone is going to be able to come by for it. He planned on stopping by last week.  Will let you know.

[DiodeDipShit]

Hi Dewey, I may be up tomorrow, That depends on what my boss (wife) has in plan..... I will PM You back. Thank You, Earache

[watchmaker]

It looks like it is spoken for.  I will PM you.

[Fried Chicken]

Interested in the Fluke DMM and the BK function generator, but I understand I just registered (longtime lurker) so no demands or expectations

[watchmaker]

We all gotta start sometime.I will PM  you.

[DiodeDipShit]

WatchMaker, Extremely impressive set up ! ! !   Thank YOU for the oscilloscope ! ! ! 

[watchmaker]

Eric,

It was great meeting a fellow traveler.  Enjoyed the conversation!  I am sending an email.

As you observed, I am in Dutch with MAry since I was unable to sneak in my now "forever" scope.  I had to scurry to get my Kikusui up.

BTW, anyone know where "in Dutch" came from?  In the Hudson Valley it meant "in a difficult situation".

[DiodeDipShit]

Damn, I most certainly had something with the Dutch Soup You are simmering in !  Though, Mary hid her despair well. Had I know, we could have had our illustrious conversation while watching down the drive for the Postman.  I double owe You now.....
To sneak to the other subject: Some Colonists did scuffle with the Dutch in New York depending on associations. Certainly, Loyalists would not want to be in Dutch territory as the NorthEast boarders were being settled. Some actually sought freedom of religious prosecution by seeking harbor with the Dutch to get away from Winthrop and his henchmen. Or.....
    Has Double Dutch have anything to do with 'in Dutch'. A secret conversation in double Dutch my have other ears telling each other. "Oh, they are speaking 'in Dutch' . This may go back to Colonial times or possibly even pre-colonial times in England, or not.
..... or does double Dutch more precisely describe WatchMakers current situation of being on permanent KP duty?
    Inquiring minds want to know.........................

[Fried Chicken]

Got the DMM and fun. generator

Excellent packaging.

Now to get the DMM calibrated........