SOLD: USA Fluke 8840A opt 05, 09, Rigol DG1022 AWG

[reagle]

Posted on US Ebay but also open on selling it here possibly for less:

Fluke 8840A with options 05 and 09
https://www.ebay.com/itm/325806463935
Readings shown are using  DMM Checkplus reference.
AC mA range seems a bit off

Rigol DG1022 AWG
https://www.ebay.com/itm/325810284070
Barely used since new

HP 54645 kit (Scope+ 2 probes+ LA harness with grabbers+HPIB module)
https://www.ebay.com/itm/325810297304
Daily driver till maybe a week ago.

[bdunham7]

Readings shown are using  DMM Checkplus reference.
AC mA range seems a bit off

You can't use the DMMCheck to test the AC current range on this because 1mAAC is way below the residual count and noise floor.  The only current range is 2000mA (AC or DC) and the minimum specified reading would be 10.00mA with a specfied 30% error tolerance. 

Your 5VDC reading seems problematic since the DMM check specifies a tolerance that would add up to 4 counts and the 8840A would be 6 counts, but you have 22 counts variance from nominal. 

[reagle]

Oh, makes total sense.
Considering this thing has not seen cal likely in several decades, not surprising eitehr

[reagle]

Fluke is gone, open to offers on HP MSO and Rigol

[reagle]

Bump- offers?

[reagle]

AWG is sold