[SOLD] Hameg HM8000 modules and racks + HM8142 power supply

[anotherlin]

Hi everyone,

I have too much stuff in my lab, so I need to clean-up a bit.

Hameg HM8000 modules may have "modest" specifications, let's say compared to a Keysight 6.5 DMM or a 33500 series function generator. But they are rather well built (made in France!) and serious work can still be done with them if used properly. And to be honest, in my case, they are sufficient to my needs/technical knowledge, but I can afford the shiny toys from Agilent/Keysight.

Hameg modules (all tested working):

• 8011-3 4.5 DMM  (AC/DC voltage and current + resistance measurement), 120 euros
• 8040-3 3MHz function generator (sine, triangle, square), sweepable, can be voltage controlled/modulated using back BNC connector, 90 euros

One HM8001-2 rack at 100 euros. This rack does not have the optional back BNC connectors.

Hameg HM8142 dual DC power supply: 2x 0-30V at 0-1A, and 1x 5V at 2A.
GPIB programmable, or can be modulated using a signal generator.
Very good power supply, I have a second one, so I'm selling this one.
300 euros.


Best regards,

[anotherlin]

Lowered the price of the 8040-3 to 90 euros.
Prices of all objects can be negotiated a bit

[Sensorcat]

The HM8142, together with its successor HM8143, is quite a unique power supply. In addition to what you would normally expect, it can work as an electronic load, an arbitrary wavform generator, and a power amplifier with 8kHz BW. I had one at a former workplace, highly recommended.

I don't know user anotherlin, just thought to add a bit of information to his very reluctant advertising.

Btw, photos don't hurt if you want to sell. 

[anotherlin]

Btw, photos don't hurt if you want to sell. 

I'll find some time to take the photos.
Also, I've a plan for a repair/teardown of a HM8032 sine wave generator module (output is very low, out of spec, at high frequency), that would be of more interest to the people of the forum.

[anotherlin]

Here is the long overdue photo.
Of course, if you buy all the items, I will offer you a discount (and you'll save on shipping)

[anotherlin]

Here's a close-up of the slightly broken connector:

[anotherlin]

Everything is sold now, thank you.