General > Buy/Sell/Wanted

Help Source - DIY Instrument Enclosure [ For Projects ]

(1/5) > >>

Amarbir[Lynx-India]:
Hello Friends ,
   
     I Would Be Designing Some Open Source Projects " Test And Measurement " Related Only .I Chanced Upon This On www.ebay.com .I would like to ask you fellows if any of you know the source of these enclosures  .I am interested To import a few cartons of the same to india


minime72706:
I've seen that enclosure before, but I don't know who, if anyone reputable, makes it.

pactec and hammond are two good choices

Amarbir[Lynx-India]:

--- Quote from: minime72706 on September 30, 2012, 02:14:18 pm ---I've seen that enclosure before, but I don't know who, if anyone reputable, makes it.

pactec and hammond are two good choices

--- End quote ---

Well,
     i do not think they make this kinda enclosure do they  ? .I did order one unit ,Guy sells for USD 25 each Puff .In Qty they should be less then 10 usd imho .

minime72706:
You won't find that exact enclosure, but they do make decent desktop instrument enclosures. http://www.pactecenclosures.com/product-detail.php?productid=54&seriesid=44&classid=26
I just thought I'd bring it to your attention since I can't help you directly.
I doubt that particular enclosure is from a high-quality manufacturer, but either way there's a chance that the manufacturer name will appear on the inside of the enclosure unless the reseller has etched it away. (I see on eBay that there are some embossed words blurred out in one of the photos.)

Amarbir[Lynx-India]:

--- Quote from: minime72706 on September 30, 2012, 02:49:48 pm ---You won't find that exact enclosure, but they do make decent desktop instrument enclosures. http://www.pactecenclosures.com/product-detail.php?productid=54&seriesid=44&classid=26
I just thought I'd bring it to your attention since I can't help you directly.
I doubt that particular enclosure is from a high-quality manufacturer, but either way there's a chance that the manufacturer name will appear on the inside of the enclosure unless the reseller has etched it away. (I see on eBay that there are some embossed words blurred out in one of the photos.)

--- End quote ---

Well,
 the embossed name is of the reselling in the pic .I got mine from this fellow -> http://www.ebay.com/itm/130711635418?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 .The Pactec are so aweful looking in comparision to this one.Might be some chinese EEVblog user can shed some light  .

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod