Author Topic: Adapter to flip screen orientation!  (Read 2539 times)

0 Members and 1 Guest are viewing this topic.

Offline huskydoggTopic starter

  • Newbie
  • Posts: 1
Adapter to flip screen orientation!
« on: May 29, 2012, 09:09:32 pm »
Ahoy! New member here! :)

I am going to make a request for a product I don't if even exists. I'm looking for a DVI hardwareadapter of some kind to flip my PC screen orientation 180 degrees. I know this can be done with built in software, but I want to do it with a hardwareadapter. The adapter can be mounted anywhere along the cable, preferably around the screen input or so.






For those interested in knowing why I want to do this with hardware:
I am looking at three computer screens in portrait-mode right now. One of the screens has it's colors distorted because it is viewed from the "bottom-up" and the view angle is really bad from the "bottom-up" perspective. View angles from top-down, left and right are good. But bottom-up isn't. You could argue that I could just grab hold of my screen with my hands and flip it over, and then adjust the orientation with Windows built in software. But that is not possible in my case because of a AMD Eyefinity screen-setup, which interpretes all three screens as one single.
 

Offline ftransform

  • Frequent Contributor
  • **
  • Posts: 728
  • Country: 00
Re: Adapter to flip screen orientation!
« Reply #1 on: May 31, 2012, 10:52:56 am »
i like your cover story  ;D

harder to detect if its behind the monitor... especially if there is a pull down panel.
 

Offline Galenbo

  • Super Contributor
  • ***
  • Posts: 1469
  • Country: be
Re: Adapter to flip screen orientation!
« Reply #2 on: June 02, 2012, 07:23:56 pm »
I know devices exist for use in Car/Bus/Lorry.
When a camera films the back of the car, from inside the car, it must be mirrored to give the driver the correct picture.

Maybe this can be used for what you want?
Don't know if it exists in DVI, don't know about the mirror/flip options.

.
 
If you try and take a cat apart to see how it works, the first thing you have on your hands is a nonworking cat.
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 27208
  • Country: nl
    • NCT Developments
Re: Adapter to flip screen orientation!
« Reply #3 on: June 03, 2012, 01:18:43 pm »
Most TFT panels have 'jumpers' to select the orientation of the picture. Open the display to look for the partnumber of the panel, find a datasheet of the panel (or a similar one) and make a modification.
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf