Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests

[BitBangingBytes]

Didn’t try that

[smallfreak]

Yea, I was closely reading Siglent’s directions last night…

I always wondered how rocket scientists are able recover their gadget a zillion miles away, when it choked on the last command, wrecked the antenna and drained the batteries.

If designed carefully, there is always another Plan-C, bypass, backdoor and spare circuit that can jump in

. 

[KungFuJosh]

There's a minor repeatable bug in 1.6.2r1.

After being in XY mode, exiting XY mode enables the digital channels on screen.

This hasn't happened in every instance, but it happens for me when I've been in XY for a while, and/maybe or when the scope is powered on in XY mode.

[2N3055]

There's a minor repeatable bug in 1.6.2r1.

After being in XY mode, exiting XY mode enables the digital channels on screen.

This hasn't happened in every instance, but it happens for me when I've been in XY for a while, and/maybe or when the scope is powered on in XY mode.

When powered in X-Y and then you exit.
Already reported...

[martin1959]

Has anyone tested the SigScopeLab software with an SDS2000X Plus?

I tried using this software.
Unfortunately, it does not work correctly with SDS2000X+. The timebase is not set correctly, it is in the range from 5 sec/div to 1 sec/div, regardless of what you set from PC. Maybe with the new firmware (when it released) the situation will improve, but for now this software useless for SDS2000X+ owners.

I had same problem using it on my Windows 10 PC which had the language and date/number format set to "German" (i.e. using comma "," as decimal separator). After changing Windows settings to use dot "." as decimal separator, as used in USA, the timebase settings were applied correctly. Maybe this helps.