Author Topic: Special Offer to EEVblog Forum Members  (Read 12786 times)

0 Members and 1 Guest are viewing this topic.

Offline PeakAtlas

  • Contributor
  • Posts: 24
  • Country: gb
  • Peak Electronic Design Ltd, UK.
    • Peak Electronic Design Ltd - Homepage
Special Offer to EEVblog Forum Members
« on: October 16, 2017, 11:33:19 am »
*** Admin, if this is not permitted on here, please delete. ***

Dear All,

I know that there are EEVblog forum members all over the world, certainly many from outside of the UK where we are based.

I acknowledge too that as our products are made in the UK then they're not cheap to start with. Airmail costs for our gear also adds a lot to the price of our products.

So just now, I've setup a discount code for EEVblog forum members to use on our website. It works for all orders over £30 and provides a 20% discount on all the products in your shopping cart.

Please note that this is a very limited time offer (stock dependent) and can end without notice.

Use code: EEVBLOG20

Best regards,

Jez Siddons

EDIT: List of main products:
Main product page: http://www.peakelec.co.uk/content/products.html
ZEN50 - Zener Diode Analyser - Test Zeners, LED strings, TVSs, VDRs and more at up to 50V (http://www.peakelec.co.uk/acatalog/jz_instruments.html)
DCA55 - Semiconductor Component Analyser - Identify many types of discrete Semi (http://www.peakelec.co.uk/acatalog/dca55-peak-atlas-dca-semiconductor-component-analyser.html)
DCA75 - Advanced Semiconductor Analyser - Identify and Curve Trace Semis (http://www.peakelec.co.uk/acatalog/dca75-dca-pro.html)
LCR40 - Passive Component Analyser - Simple automatic LCR meter (http://www.peakelec.co.uk/acatalog/jz_lcr40.html)
LCR45 - Passive Component Impedance Meter - More advanced LCR meter (http://www.peakelec.co.uk/acatalog/lcr45.html)
SCR100 - Triac and Thyristor Analyser - Identify and Measure SCRs and Triacs (http://www.peakelec.co.uk/acatalog/jz_scr100.html)
ESR70 - Capacitance and ESR Meter - Measure ESR in-circuit, includes graceful discharge (http://www.peakelec.co.uk/acatalog/jz_esr70.html)
ATPK2 - DCA55 and LCR40 bundle in carry case (http://www.peakelec.co.uk/acatalog/jz_special_offers.html)
ATPK3 - DCA75 and LCR45 bundle in carry case (http://www.peakelec.co.uk/acatalog/jz_special_offers.html)
PCA23 - SOT23 Component Adapter (http://www.peakelec.co.uk/acatalog/pca23-sot23-test-adapter.html)

  • All designed and made in the UK.
  • 24 month warranty.
  • Battery included.
  • Full printed user guide included.
   

« Last Edit: October 16, 2017, 12:47:42 pm by PeakAtlas »
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 18531
  • Country: nl
    • NCT Developments
Re: Special Offer to EEVblog Forum Members
« Reply #1 on: October 16, 2017, 11:51:12 am »
It would help to add a short list with the type of products you sell. I for one have never heard of your company.
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 
The following users thanked this post: PeakAtlas

Offline gmb42

  • Regular Contributor
  • *
  • Posts: 184
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #2 on: October 16, 2017, 12:19:57 pm »
 
The following users thanked this post: PeakAtlas

Offline PeakAtlas

  • Contributor
  • Posts: 24
  • Country: gb
  • Peak Electronic Design Ltd, UK.
    • Peak Electronic Design Ltd - Homepage
Re: Special Offer to EEVblog Forum Members
« Reply #3 on: October 16, 2017, 12:49:47 pm »
Good point, thanks  :)
 

Offline Zucca

  • Supporter
  • ****
  • Posts: 2389
  • Country: it
  • EE meid in Itali
Re: Special Offer to EEVblog Forum Members
« Reply #4 on: October 16, 2017, 01:20:49 pm »
They are cool little toys. Fantastic for beginners, hobby level or general EE fixing business.
Oh well I will buy some. TEA.
Can't know what you don't love. St. Augustine
Can't love what you don't know. Zucca
ON SALE: HP 6642A 20V 10A
 
The following users thanked this post: PeakAtlas, JPortici

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1303
  • Country: no
Re: Special Offer to EEVblog Forum Members
« Reply #5 on: October 16, 2017, 02:32:55 pm »
Very nice small tools, they have been discussed in some threads here before:

https://www.eevblog.com/forum/other-blog-specific/new-video-peak-electronics-dca75-pro-semiconductor-analyser/

also a couple of good review videos on them:







 

Offline exe

  • Supporter
  • ****
  • Posts: 1398
  • Country: nl
  • self-educated hobbyist
Re: Special Offer to EEVblog Forum Members
« Reply #6 on: October 16, 2017, 03:22:23 pm »
Not sure if I should ask here, apologizes for that.

I'd love to buy your ESR meter, but there a few things I miss.

1) why they don't let choose arbitrary frequency and/or do sweep? Like, ESR70 supports only "industry standard 100kHz". But LCR45 doesn't even support 100kHz, but supports 200kHz....
2) Looks like none of them can show losses or dissipation factor directly (I don't see these on photos).
3) Having cap discharge on LCR45 would be great...
4) PC connection.

Is it possible to add these features? I can be your beta-tester  :D
 

Offline PeakAtlas

  • Contributor
  • Posts: 24
  • Country: gb
  • Peak Electronic Design Ltd, UK.
    • Peak Electronic Design Ltd - Homepage
Re: Special Offer to EEVblog Forum Members
« Reply #7 on: October 16, 2017, 04:43:08 pm »
You are absolutely right to ask here and thank you for your comments.

I'll discuss these with my colleagues.

In the meantime, my immediate thoughts are as follows:

The ESR70 is primarily aimed at the testing of electrolytics where ESR is usually the important factor. For that reason, the ESR70 is designed to cope with charged caps and the protection mechanisms for providing that protection don't influence the measurements of, usually, large value capacitances. The LCR40/45 however are designed to measure down to much lower values (<1pF) and the influence of protection electronics that could cope with big charged capacitors can be quite significant. Even my £1500 Hameg HM8118 bridge has a warning about not connecting to charged capacitors.

Going back to the ESR70. The test frequency of 100kHz is actually not that important because ESR itself is not very frequency dependent. The ESR70 effectively isolates the ESR "bit" of the capacitor's characteristic by measuring the voltage change that occurs in sync with the 100kHz toggling constant current generator. That means that other capacitor characteristics such as leakage and dielectric absorption won't influence the ESR reading. This is not the case when measuring the complex impedance of the capacitor, all manner of characteristics can then influence the "real" part of the complex impedance and it's not just the ESR.

Anyway, I probably digressed a little there. I take on board your feedback and we'll look into future enhancements. A swept arbitrary frequency and PC connection on the LCR would be lovely...

Regards,
Jez
 
The following users thanked this post: exe, Momchilo, Mr. Scram

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #8 on: October 16, 2017, 11:45:48 pm »
*** Admin, if this is not permitted on here, please delete. ***

Dear All,

I know that there are EEVblog forum members all over the world, certainly many from outside of the UK where we are based.

I acknowledge too that as our products are made in the UK then they're not cheap to start with. Airmail costs for our gear also adds a lot to the price of our products.

So just now, I've setup a discount code for EEVblog forum members to use on our website. It works for all orders over £30 and provides a 20% discount on all the products in your shopping cart.

Please note that this is a very limited time offer (stock dependent) and can end without notice.

Use code: EEVBLOG20

Best regards,

Jez Siddons

EDIT: List of main products:
Main product page: http://www.peakelec.co.uk/content/products.html
ZEN50 - Zener Diode Analyser - Test Zeners, LED strings, TVSs, VDRs and more at up to 50V (http://www.peakelec.co.uk/acatalog/jz_instruments.html)
DCA55 - Semiconductor Component Analyser - Identify many types of discrete Semi (http://www.peakelec.co.uk/acatalog/dca55-peak-atlas-dca-semiconductor-component-analyser.html)
DCA75 - Advanced Semiconductor Analyser - Identify and Curve Trace Semis (http://www.peakelec.co.uk/acatalog/dca75-dca-pro.html)
LCR40 - Passive Component Analyser - Simple automatic LCR meter (http://www.peakelec.co.uk/acatalog/jz_lcr40.html)
LCR45 - Passive Component Impedance Meter - More advanced LCR meter (http://www.peakelec.co.uk/acatalog/lcr45.html)
SCR100 - Triac and Thyristor Analyser - Identify and Measure SCRs and Triacs (http://www.peakelec.co.uk/acatalog/jz_scr100.html)
ESR70 - Capacitance and ESR Meter - Measure ESR in-circuit, includes graceful discharge (http://www.peakelec.co.uk/acatalog/jz_esr70.html)
ATPK2 - DCA55 and LCR40 bundle in carry case (http://www.peakelec.co.uk/acatalog/jz_special_offers.html)
ATPK3 - DCA75 and LCR45 bundle in carry case (http://www.peakelec.co.uk/acatalog/jz_special_offers.html)
PCA23 - SOT23 Component Adapter (http://www.peakelec.co.uk/acatalog/pca23-sot23-test-adapter.html)

  • All designed and made in the UK.
  • 24 month warranty.
  • Battery included.
  • Full printed user guide included.


Thanks for the EEVblog discount, Just ordered a ESR70, Probes and a Case.

Nice to buy something "Made In England"   :)
 
The following users thanked this post: PeakAtlas

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #9 on: October 18, 2017, 06:32:04 pm »
Quote
Thanks for the EEVblog discount, Just ordered a ESR70, Probes and a Case.

Nice to buy something "Made In England"   :)

Disappointed! No delivery today.  :(

Ordered before 2pm for next day first class delivery.

Tracking info should be on all parcels now days.

Lets hope it's here tomorrow.
 

Offline rsjsouza

  • Super Contributor
  • ***
  • Posts: 3613
  • Country: us
  • Eternally curious
    • Vbe - vídeo blog eletrônico
Re: Special Offer to EEVblog Forum Members
« Reply #10 on: October 18, 2017, 07:31:24 pm »
Bookmarked. The DCA75 looks interesting to me, but my hobby budget for this month has vapourized.  :(
Vbe - vídeo blog eletrônico http://videos.vbeletronico.com

Oh, the "whys" of the datasheets... The information is there not to be an axiomatic truth, but instead each speck of data must be slowly inhaled while carefully performing a deep search inside oneself to find the true metaphysical sense...
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 16997
  • Country: nz
  • Taupaki Technologies Ltd. NZ Siglent Distributor
    • Taupaki Technologies Ltd.
Re: Special Offer to EEVblog Forum Members
« Reply #11 on: October 18, 2017, 07:39:48 pm »
Small endorsement for Peak Atlas products.

A buddy has had a few models for years.
Member Defpom has some too.

I don't own any yet...........

Avid Rabid Hobbyist
 

Offline nanofrog

  • Super Contributor
  • ***
  • Posts: 5448
  • Country: us
Re: Special Offer to EEVblog Forum Members
« Reply #12 on: October 19, 2017, 06:35:31 am »
FWIW, I checked all the US distributor pricing on a DCA75, and even after adding shipping, it's still less expensive to buy directly from Peak Atlas using the discount.  :-+ And it's more convenient than using a breakout curve tracing board with an oscilloscope.

So now I just have to make up my feeble mind.  :o  :-DD

And if I didn't already have an LCR meter (DER DE-5000), I'd be looking really hard at the ESR70+ too.
 

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #13 on: October 19, 2017, 08:25:34 am »
Quote
Thanks for the EEVblog discount, Just ordered a ESR70, Probes and a Case.

Nice to buy something "Made In England"   :)

Disappointed! No delivery today.  :(

Ordered before 2pm for next day first class delivery.

Tracking info should be on all parcels now days.

Lets hope it's here tomorrow.

Arrived today, postmark says 17th so we can blame "Royal" Mail.

Thanks Peak, good service  :-+ (although a proper courier with tracking would be better).
 

Offline BroMarduk

  • Supporter
  • ****
  • Posts: 49
  • Country: us
Re: Special Offer to EEVblog Forum Members
« Reply #14 on: October 19, 2017, 05:12:26 pm »
I have the LCR45, ESR70, SCA75, SCR100 and ZEN50 (+ the Network Cable Analys(z)er) and the cases.   Wish I knew about the discount before!

Still I use each of them quite often, especially the ESR70.

Perhaps its time to get a pack of the (quite expensive) Identifed Terminators for the Network tool.
 

Offline kikook

  • Contributor
  • Posts: 13
  • Country: fr
  • Only Audio Vintage
    • Audiovintage.fr
Re: Special Offer to EEVblog Forum Members
« Reply #15 on: October 19, 2017, 06:30:39 pm »
Very good products,  and good politic to propose repair at a correct price.
My old and broken esr60 is now a perfect functioning esr70 thanks to this service.

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1303
  • Country: no
Re: Special Offer to EEVblog Forum Members
« Reply #16 on: October 19, 2017, 08:33:26 pm »
Would be nice if we could upgrade these devices our self in the event of new firmware though, I guess most are PIC based, and many of us already have tools for that.
If there have been updates that is.
 

Offline ralphrmartin

  • Frequent Contributor
  • **
  • Posts: 309
  • Country: gb
    • Work website
Re: Special Offer to EEVblog Forum Members
« Reply #17 on: October 20, 2017, 05:25:35 pm »
You can certainly upgrade the DCA75 firmware yourself (with a PC).
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1303
  • Country: no
Re: Special Offer to EEVblog Forum Members
« Reply #18 on: October 20, 2017, 09:03:31 pm »
You can certainly upgrade the DCA75 firmware yourself (with a PC).

I know, I have it, but it's only that one.
But not the Zen50 for instance, mine have R1.2, and the latest is 1.4, and you need to send it in... Maybe due to the recalibration though?
 

Offline trevwhite

  • Frequent Contributor
  • **
  • Posts: 812
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #19 on: October 25, 2017, 09:18:11 pm »
Is there any plans for a beefed up DCA75? It looks really useful but the range of voltage and currents seem limited for some tests.
 

Offline casinada

  • Frequent Contributor
  • **
  • Posts: 597
  • Country: us
Re: Special Offer to EEVblog Forum Members
« Reply #20 on: October 27, 2017, 06:31:04 am »
Jeremy,
For the ESR 70:
What is the difference between Firmware 4.7 and 4.9? It would be nice to have a page with the firmware changes.
For the DCA 75
Back in April I requested if it was possible to make changes in the firmware to measure JFETs with very low IDSS. As it stands now, it doesn't recognize the JFETs. I tried to do it manually as you suggested but it didn't work. Are you working on a solution?
Thank you  :)
 
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 9015
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #21 on: October 27, 2017, 06:12:12 pm »
Peak are a well known producer of some very neat compact test equipments in the UK. The have been around for many years and I am pleased to see a UK based company providing such equipment. It is not an easy market in which to sell, thanks to cheap Chinese test equipment.

I own the DCA55,DCA75 and ESR70. All three are excellent value for money and perform very well. Another important factor when buying equipment from Peak is their after sales support. I offer the following example of what you can expect ......

I purchased a used DCA55 that was faulty. The fault was likely due to user abuse. I advised Peak of the history of the unit and requested any information that they could share on the meaning of a displayed fault code. I was hoping to narrow down what part of the unit was failing the self test or at least identifying that the unit was scrap due to a fried PIC chip.

I received support responses from both Peak Customer Support and Jez himself.

The error code was common to several possible failures but Peak provided me with a repair note made available to those owners wishing to attempt their own repairs. I was also offered repair at very reasonable cost by Peak. Jez indicated that if the PIC was fried, I could contact him to obtain a replacement.

I checked the contents of the DIY repair guidance written by Peak and it was clear that abuse of the input could destroy the input protection TVS diodes and some common IC's. It was advised to fit new SMD TVS diodes and replace the IC's in a stated order. I replaced the diodes and the first IC. The unit was returned to full functionality at this point. I went ahead and replaced the other IC's as well as they may have suffered stress during the abuse event. Thankfully the PIC chip is fine and does not need to be replaced. The DCA55 is providing excellent back-up service to my DCA75.

In a previous conversation on this forum with Jez, it was highlighted that the cases that Peak use are novel, but they sit flat on the bench when a tilted attitude would be better for ease of reading the display. Jez took this constructive criticism and designed a really neat desk stand that could be 3D printed. The stand is a lovely solid design and not just a 'prop' or 'bale' type. Jez released the 3D build file to all for free as a service to his customers. I believe the stand is available on the Peak web site fro free download. I asked Jez if I could purchase a stand from him as I did not have a working 3D printer at the time. This gentleman sent me a stand free of charge ! Please do not inundate him asking for freebies, he was just being very kind and generous to me.

So in precis, Peak stand by their product and offer excellent customer support even when you tell them you purchased a unit known to be faulty ! I get the strong feeling that Jez and his team like to be helpful where possible and will help those users of their excellent equipment to maintain it. I cannot imagine a Chinese manufacturer of similar equipment being so helpful somehow.

I also own some other brands of ESR meter and component tester. I was please to be able to buy British though and support a 'local' company that produces some innovative products. Jez is a very clever designer and I fully endorse both his products and his excellent positive attitude to customer support.

I will see what other kit Peak have that I can add to my test bench  :)

Fraser
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 9015
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #22 on: October 27, 2017, 06:23:49 pm »
This thread is worth a read. It is where Jez enters the discussion on his products and provides the design for the bench stand. I include the 3D printing file here as well.

https://www.eevblog.com/forum/buysellwanted/peak-dca75-for-$59-really/

Fraser
« Last Edit: October 27, 2017, 06:29:27 pm by Fraser »
 

Offline ruairi

  • Frequent Contributor
  • **
  • Posts: 286
  • Country: us
Re: Special Offer to EEVblog Forum Members
« Reply #23 on: October 27, 2017, 07:07:47 pm »
I have an ESR70 which justified it's purchase the very first time I used it.  I also have a DCA which I find useful.  Great products, I need to get the hard case for mine.
 

Offline Svuppe

  • Regular Contributor
  • *
  • Posts: 90
  • Country: dk
Re: Special Offer to EEVblog Forum Members
« Reply #24 on: November 07, 2017, 07:12:39 pm »
Please note that this is a very limited time offer (stock dependent) and can end without notice.
I just stumbled over this thread today, and feared I was late to the party (wouldn't be the first time that had happened). Luckily, the code still works. One DCA75 ordered.
I have been looking at it a couple of times earlier, but succesfully resisted the temptation. But this offer I couldn't refuse  ;D
 

Offline Ysjoelfir

  • Frequent Contributor
  • **
  • Posts: 471
  • Country: de
Re: Special Offer to EEVblog Forum Members
« Reply #25 on: November 07, 2017, 09:30:24 pm »
Nice to know that Atlas offers this discount :) sadly I don't have the money to grab a ESR right now :( I am waiting for a chance to get one for quite a while after using my LCR40 (which is broken...) with much enjoyment for some years now. Maybe the discount will be available in a few month when I have the money.
Grab one if you can, they are very nice little meters.
« Last Edit: January 21, 2018, 04:51:03 pm by Ysjoelfir »
Greetings, Kai \ Ysjoelfir
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 9015
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #26 on: November 07, 2017, 10:16:05 pm »
Ysjoelfir,

If your LCR40 has failed, I suggest you contact Jez at Peak. He is a very helpful chap who will help you if he is able. In my case he helped me repair a DCA55. Most components used are common parts and available cheaply. Even if the PIC has died, it is likely Jez can help with the supply of a replacement.

Fraser
 

Offline odessa

  • Regular Contributor
  • *
  • Posts: 109
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #27 on: November 09, 2017, 09:22:53 am »
Great offer, just bought a DCA55 to add to my ECR70  8)
When  I die I want to die peacefully in my sleep like my Grandad ... Not all shouting and screaming like the passengers on his bus.
 

Offline odessa

  • Regular Contributor
  • *
  • Posts: 109
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #28 on: November 10, 2017, 06:54:45 pm »
Received today, thanks very much   :-+
When  I die I want to die peacefully in my sleep like my Grandad ... Not all shouting and screaming like the passengers on his bus.
 

Offline bsudbrink

  • Frequent Contributor
  • **
  • Posts: 371
  • Country: us
Re: Special Offer to EEVblog Forum Members
« Reply #29 on: November 10, 2017, 07:52:50 pm »
Got my ESR70 yesterday.  Very handy little unit.  Thanks for the discount.
 

Offline pamphonica

  • Contributor
  • Posts: 44
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #30 on: November 11, 2017, 04:14:19 pm »
I just upgraded to an LSR45.  Thanks very much for the discount.
Jeremy
 

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #31 on: November 25, 2017, 09:50:17 pm »
"Well it's Black Friday so we don't want you to miss out on a great deal. Use the coupon code BLACK during checkout for a 25% discount on all products.http://www.peakelec.co.uk
Cart must be £30+ to qualify"
 

Offline cowasaki

  • Frequent Contributor
  • **
  • Posts: 487
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #32 on: January 20, 2018, 11:34:14 pm »
Has the offer finished as I was looking at buying an ESR meter?

Thanks
 

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #33 on: January 21, 2018, 12:42:04 am »
Has the offer finished as I was looking at buying an ESR meter?

Thanks

No - Still working  :-+
 

Offline Kjelt

  • Super Contributor
  • ***
  • Posts: 5759
  • Country: nl
Re: Special Offer to EEVblog Forum Members
« Reply #34 on: January 21, 2018, 03:18:52 pm »
No - Still working  :-+ 
You're sure? I just tried it with a ATPK3 - Atlas Pro Pack - LCR45 + DCA75 + Case
didn't work :(

Quote
The coupon code (BLACK) was not recognised, please check and re-enter.
 

Offline trevwhite

  • Frequent Contributor
  • **
  • Posts: 812
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #35 on: January 21, 2018, 03:47:01 pm »
That's the wrong code. EEVBLOG20 I think is the correct code
 
The following users thanked this post: Kjelt

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #36 on: January 21, 2018, 03:50:25 pm »
No - Still working  :-+ 
You're sure? I just tried it with a ATPK3 - Atlas Pro Pack - LCR45 + DCA75 + Case
didn't work :(

Quote
The coupon code (BLACK) was not recognised, please check and re-enter.


The one from the OP

"Use code: EEVBLOG20"  :-+
 
The following users thanked this post: Kjelt

Offline cowasaki

  • Frequent Contributor
  • **
  • Posts: 487
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #37 on: January 21, 2018, 04:08:39 pm »
Just checked and it would have worked for me. I want the pro pack, ESR meter and possibly another but might have to wait till end feb rather than jan. hoping it’s still working by then!
 

Offline Kjelt

  • Super Contributor
  • ***
  • Posts: 5759
  • Country: nl
Re: Special Offer to EEVblog Forum Members
« Reply #38 on: January 21, 2018, 04:40:25 pm »
Thanks, all succesfully ordered  8)
 

Offline cowasaki

  • Frequent Contributor
  • **
  • Posts: 487
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #39 on: January 21, 2018, 11:15:45 pm »
I can handle anything except temptation.........

I've just purchased:

ATPK3 - Atlas Pro Pack - LCR45 + DCA75 + Case   
ESR70 - Atlas ESR PLUS - Equivalent Series Resistance Meter
ZEN50 - Atlas ZEN Zener Diode Analyser

and saved £55 using the code.  I did have £400ish for a DMM but I've bought a couple of PM2525s so now I have enough for these too.
 

Offline jasonbrent

  • Regular Contributor
  • *
  • Posts: 174
Re: Special Offer to EEVblog Forum Members
« Reply #40 on: February 18, 2018, 01:06:46 am »
Just went to order ATPK3 and the code (EEVBLOG20) has expired.

The specified coupon code expired on 31/01/2018.
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 9015
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #41 on: February 18, 2018, 02:48:12 am »
Maybe a new code will be issued. It would be worth contacting the OP and asking as he is a very approachable and friendly chap  ;)

Fraser
 

Offline cowasaki

  • Frequent Contributor
  • **
  • Posts: 487
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #42 on: February 18, 2018, 03:29:05 am »
It’s definitely worth doing. They are great little devices.
 

Offline Clint

  • Regular Contributor
  • *
  • Posts: 117
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #43 on: February 18, 2018, 02:23:04 pm »
I would be interested in a new code.
=-=-=-=-=-=-=-=-=
g33K5 L1k3 80085
 

Offline Harb

  • Regular Contributor
  • *
  • Posts: 244
  • Country: au
Re: Special Offer to EEVblog Forum Members
« Reply #44 on: February 19, 2018, 12:48:27 pm »
I have to say, I travel to a lot of various sites, and these little testers are a god send for quick diagnosis of stuff...... no need to lug heavy gear in anymore unless I really need to.........I have the whole range of them velcro'd to a piece of 4 x 1 with a handle at one end and just lug them in and lean them against the wall and I have a full complement of test gear with me ! ........sure beats the trolley with full size gear for a quick look at something that can't be easily moved to the lab.
 

Offline Neganur

  • Supporter
  • ****
  • Posts: 1114
  • Country: fi
Re: Special Offer to EEVblog Forum Members
« Reply #45 on: February 19, 2018, 04:34:14 pm »
Regarding DCA75 Pro Semiconductor Analyser
https://www.youtube.com/watch?v=CnkdtJRYbXg&feature=youtu.be&t=23m34s

"[...]really saves time with identifying faulty components[...]"

Looks neat, also the software. But how it will identify that fried silicon is a bit beyond me :P
« Last Edit: February 19, 2018, 04:37:11 pm by Neganur »
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 9015
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #46 on: February 19, 2018, 06:19:35 pm »
You look for a component with the same markings, or use, on the board that is not fried and test that  :P

If there is no duplication on the board, a component analyser is of little use in that exact scenario.
 

Offline ralphrmartin

  • Frequent Contributor
  • **
  • Posts: 309
  • Country: gb
    • Work website
Re: Special Offer to EEVblog Forum Members
« Reply #47 on: February 19, 2018, 07:43:02 pm »
"[...]really saves time with identifying faulty components[...]"

Looks neat, also the software. But how it will identify that fried silicon is a bit beyond me :P

I think it supposed to be read "identifying which components are faulty", assuming you know how they are supposed to behave.
 

Offline Chris-IP5

  • Contributor
  • Posts: 19
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #48 on: March 06, 2018, 03:57:19 pm »
To PeakAtlas:
Thanks for this most generous offer.

I've wanted an ESR meter for ages but couldn't afford one until your offer. I ordered ESR70 straight away.

To everyone else:
This little meter is fantastic, even better than the adverts make out!
I've found it to be thoughtfully designed, easy to use and surprisingly revealing.
I recommend it to all hobbyists.
 

Offline Jon.C

  • Supporter
  • ****
  • Posts: 123
  • Country: ad
Re: Special Offer to EEVblog Forum Members
« Reply #49 on: March 24, 2018, 10:42:54 am »
Thanks @PeakAtlas

my  ESR70 has arrived perfect to Andorra

it works very well and the sounds are very useful

I'm very happy  :scared:
 

Offline Trisc

  • Contributor
  • Posts: 6
  • Country: au
Re: Special Offer to EEVblog Forum Members
« Reply #50 on: April 03, 2018, 01:22:28 pm »
Hey guys

Has the offer finished?
I was hoping to get hold of a pro pack.

Cheers


Sent from my iPhone using Tapatalk
If it hasn't blown up at some stage during development, you're doing it wrong.
Dream big, think big, stick at it & youll achieve greatness.... one day....
 

Online jack-daniels

  • Contributor
  • Posts: 32
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #51 on: April 03, 2018, 01:44:03 pm »
Hey guys

Has the offer finished?
I was hoping to get hold of a pro pack.

Cheers


Sent from my iPhone using Tapatalk

Still working. Use the code "EEVBLOG20".
 

Offline Jon.C

  • Supporter
  • ****
  • Posts: 123
  • Country: ad
Re: Special Offer to EEVblog Forum Members
« Reply #52 on: May 12, 2018, 09:17:00 am »
@PeakAtlas

Received, all perfect !!!



 

Online peteb2

  • Regular Contributor
  • *
  • Posts: 173
  • Country: nz
Re: Special Offer to EEVblog Forum Members
« Reply #53 on: August 07, 2018, 05:37:34 am »
Going off topic & following up on the suggestion that Peak may see my message here... (i hope that's OK). iI,ve made a call-out for assistance with my LCR40. This is a bit of a repost therefore, so apologies if it's out of order to do so...

I've directly invested over the years in all of Peak's test units (but not their Ethernet unit as yet) including a lot of spare, various interconnects etc (i endorse them as being of quite a reasonable quality).

I admit the units don't get a lot of use but they are damn handy when yuh need 'em!

Recently went to use the LCR40 and noted the LCD wasn't looking too happy as if contrast has shifted. The unit appears to be operating OK but it can be a bit hard to read that display sometimes especially if i'm doing a multiple run on some parts during a measuring session and its not set on a perfect angle in incident lighting.

I have the LCR45 to hand of course so not a huge issue with things but i'd like to sort the LCR40.

I acknowledge that Peak offer a set service-repair but since i'm in New Zealand i'm just wondering if there's anyone else who has seen such an issue before i commit to sending the unit across the other side the world for something that's kind of trivial....

The unit  boot message: @ R3.02 #59975 Cal due Oct 2012.
 

Offline PeakAtlas

  • Contributor
  • Posts: 24
  • Country: gb
  • Peak Electronic Design Ltd, UK.
    • Peak Electronic Design Ltd - Homepage
Re: Special Offer to EEVblog Forum Members
« Reply #54 on: August 07, 2018, 10:47:37 am »
Hi Pete,

Sorry I hadn't seen your posts before, I'm not always here, but pop in every now and then.

Yes, we've seen this issue on some of our LCD modules before, in fairly small numbers thankfully, but it is certainly a known problem that our LCD supplier have acknowledged.

Although your LCR is out of it's 2 year warranty period, we're happy to sort out the rectification of this free of charge.

If you wish, you can send your LCR40 to us here in the UK, or if you prefer, we can send you a replacement LCD module (if that's the case them please PM me your postal address).

If you do wish to send your LCR40 to us then please ensure that the outside of the package is clearly marked with "Inward Processing Relief - Item return to factory for repair" to help reduce the possibility of it attracting duty charges. Our address is as follows:

Repairs Dept - Peak Electronic Design Ltd
Atlas House, 2 Kiln Lane,
Harpur Hill Business Park
Buxton, Derbyshire
SK17 9JL, UK

I hope that helps you. Let me know if you have any further queries.

All the best,

Jez

 
The following users thanked this post: peteb2

Offline arunas500

  • Newbie
  • Posts: 1
  • Country: lt
Re: Special Offer to EEVblog Forum Members
« Reply #55 on: September 09, 2018, 07:13:06 pm »
Hello,

I use ATLAS ESR70 and I am very happy about this device. I mainly use this for Piezo Injectors capacitance check. Your device works at 100 KHZ. For my work I only need 1 KHZ. Is there a possibility to change the frequency at this device?

Thank you, Arunas
 

Offline matseng

  • Frequent Contributor
  • **
  • Posts: 564
  • Country: se
    • My Github
Re: Special Offer to EEVblog Forum Members
« Reply #56 on: September 10, 2018, 06:49:32 pm »
I just ordered a LRC45 using the discount code, it covered the upgrade to courier shipping and a bit more.  Nice!
 

Offline EinErik

  • Newbie
  • Posts: 1
  • Country: 00
Re: Special Offer to EEVblog Forum Members
« Reply #57 on: October 31, 2018, 01:28:36 pm »
Hello folks,

I just tried to buy DCA75 pro, but I found the discount code is no more valid, is this real? :palm:

By the way, dear PeakAtlas, may I ask what is the difference between certificated version and normal version?
Specifically, what calibrations have been performed?

Thanks!
 

Offline MrElectric

  • Contributor
  • Posts: 24
  • Country: se
Re: Special Offer to EEVblog Forum Members
« Reply #58 on: January 08, 2019, 10:19:23 am »
Just recently started repairing electronics again, after 20+ years of doing other things. I did it to repair some failed electronics I own. But my interest got peaked again, so I decided to get into this again. A couple of days ago, I happened to find the test equipment DCA55 and ESR70.

Having found this thread, I had a look at peakelec.co.uk and was going to order both the DCA55, ESR70 and the LCR40, but, unfortunately, I can confirm that the coupon code does not work anymore.

Now that I'm not in a hurry to order before the discount code expires, I need to think a bit more. I would really have use of the ESR70 to test capacitors. The other two would be fun to have, but not sure how much I really need them.
« Last Edit: January 08, 2019, 10:22:05 am by MrElectric »
 

Offline all_repair

  • Frequent Contributor
  • **
  • Posts: 608
Re: Special Offer to EEVblog Forum Members
« Reply #59 on: November 15, 2019, 04:39:09 am »
Revive an old post to try to reach Mr Peak Atlas.  Last round of the promo, I bought an SCR tester.
Time to buy a few more Peak testers if there is a good deal.  Looking at DCA75 and ESR70.  I am using alternatives now.
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 9015
  • Country: gb
Re: Special Offer to EEVblog Forum Members
« Reply #60 on: November 15, 2019, 12:06:44 pm »
Send him a PM. He is a really nice chap and I feel sure he will help you :)

If you write to Jez via the Peak web site, it will likely get to him as well :)

I just purchased a used Atlas SCR tester Mk2 on eBay. I could not justify a buying a new one but £35 was great for such a unit. I already own the DCA75 and ESR70. Both are excellent units and well worth having  :-+

Fraser

Contact Details for Peak.....


Postal Address:
Peak Electronic Design Ltd
Atlas House, 2 Kiln Lane
Harpur Hill Business Park
Buxton, Derbyshire
SK17 9JL
United Kingdom

Telephone:
Within UK: 01298 70012
International: 44 1298 70012


Sales: sales@peakelec.co.uk
Accounts: accounts@peakelec.co.uk
Technical Support: technical@peakelec.co.uk
« Last Edit: November 15, 2019, 12:14:16 pm by Fraser »
 

Offline wnorcott

  • Regular Contributor
  • *
  • Posts: 98
  • Country: us
  • I like making projects with the ESP32
Re: Special Offer to EEVblog Forum Members
« Reply #61 on: November 15, 2019, 04:00:58 pm »
Buying merchandise for export to the US do they waive the value added tax? For example LCR40  price says £86.10  (£71.75 ex VAT)
On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf