ENDED: Lot of SMD components on reel - Resistors,Capacitors and more for FREE

[con-f-use]

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut

You forgot about me.

[XpsikotiX]

I'd chip you some dollars for a pack, PM me your paypal address.

I've bought 1k of 1k resistors last year, already can see the end of it, you can always just throw some uF caps around and it's always good to have a 100nF reel.

Please read all the posts. i trimmed all the reels and if you pay the postage i can send from each reel 80 cm piece . please PM with your country and i will give you a quote on shipping

[XpsikotiX]

I'm done with  the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
 Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp


Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received.

[Arp]

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut

You forgot about me.

And me. Although I did just send the PM 

[XpsikotiX]

I'm done with  the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
 Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp - confirmed
resistor
neslekkim


Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request
You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

[neslekkim]

sendt you an pm

[XpsikotiX]

I'm done with  the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
 Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp - confirmed
resistor
neslekkim


Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request
You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

[XpsikotiX]

I'm done with  the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
 Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp - confirmed
resistor
neslekkim


Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request
You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

The first 9 packs will have almost all the components listed, the rest will have the same amount of components but more of the same kind!(100nf 50v capacitors mostly)

[XpsikotiX]

I'm done with  the cutting.
I have 20 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table(for free).

 Until now i have requests from:


Nuno_pt -   confirmed
valentinc -  confirmed
con-f-use -  confirmed
Arp -           confirmed
resistor -    confirmed
neslekkim - confirmed
Fsck -         confirmed
EdoNork -   confirmed
idpromnut -confirmed
SolidFloyd -confirmed
gibbled      -confirmed
AudioplatinumService - confirmed
amwales-   confirmed
Po6ept    -  confirmed

sigxcpu




Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the right one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request
You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

The first 9 packs will have almost all the components listed, the rest will have the same amount of components but more of the same kind!(100nf 50v capacitors mostly)

[XpsikotiX]

Only 8 to go! hurry

[XpsikotiX]

Only 8 to go! hurry

Final call for the last 6, tomorrow morning i will withdraw the funds from paypal and hopefully i can dispatch the packs on Saturday

[astra]

hi..i'm sad for your troubleshooting with job..i think i could unterstand your situation..it's more than one year that i've loose my job..so i've a lot of time..but not so much money...so i go back to my passion..electronics..so if you have the patience to divide the reels..i'd like to receive some sample of each component as i'd like to try some smd project on wich i'm dedicating my time..of course i'll pay you the cost you should pay..the envelope..the poststamp..and the time you should dedicate in dividing the reels.Please let me know if you decide to proceed in this way..
Astra.
Ps.good luck for to find a new job...
Pps.please apologized me for my poor english..but i'm not english mothertongue..

[MatCat]

I want a packet, I would be willing to pay shipping.

[XpsikotiX]

I'm done with  the cutting.
I have 20 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table(for free).

 Until now i have requests from:


Nuno_pt -   confirmed
valentinc -  confirmed
con-f-use -  confirmed
Arp -           confirmed
resistor -    confirmed
neslekkim - confirmed
Fsck -         confirmed
EdoNork -   confirmed
idpromnut -confirmed
SolidFloyd -confirmed
gibbled      -confirmed
AudioplatinumService - confirmed
amwales-   confirmed
Po6ept    -  confirmed
MatCat  -    confirmed
mtdoc    -   confirmed
astra     -   confirmed
sigxcpu   - confirmed
AndreaEl - confirmed
jadew  -    confirmed

ALL THE PACKS ARE CLAIMED AND PAYED ! PLEASE DON'T MAKE MORE REQUESTS.






Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the right one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request
You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

The first 9 packs will have almost all the components listed, the rest will have the same amount of components but more of the same kind!(100nf 50v capacitors mostly)



The rules are : first paid first served. if you pay and i dont have any packs left i will refund you the money.

ALL THE PACKS ARE CLAIMED AND PAYED ! PLEASE DON'T MAKE MORE REQUESTS.

[XpsikotiX]

All the packs are dispatched. The price of the shipping  written on the envelope is without taxes so its a bit cheaper that i asked you, but be assured that i paid exactly what i asked. If anyone need proof of that i can send a scan of  the receipt.
The delivery time rates are(stated by the italy post) : Europa: 6 business days,  America: 14 business days .... yeah... if only

So after you receive them please write here if you are satisfied with the components that  i sent you

[george graves]

You want my trusty 87-V?  You can pry it out of my cold dead hands!

No, i dont want it. I did not try to offend anyone. As you see the topic has changed. I give them away for free.

I was joking - I hope you know.  Ok. Ha! This thread is really odd.....

[AndreaEl]

I receive the component yesterday, All ok and big thanks you, But some capacitor is not labeled.

The two tape of 1206 Capacitor: Black are 1206 22nF 200V, Transparent one are: 1206 4.7uF 10V
Other tape of capacitor(0603) with no label, I measure it and mesure 127nF (maybe the 100nF?). If it's the 100nF is 25V or 50V rating?

The resistor: I have no 0805 150k  1%, but 0805 15k.

Fast shipping in Italy 

Again Thanks you a Lot.

[XpsikotiX]

I receive the component yesterday, All ok and big thanks you, But some capacitor is not labeled.

The two tape of 1206 Capacitor: Black are 1206 22nF 200V, Transparent one are: 1206 4.7uF 10V
Other tape of capacitor(0603) with no label, I measure it and mesure 127nF (maybe the 100nF?). If it's the 100nF is 25V or 50V rating?

The resistor: I have no 0805 150k  1%, but 0805 15k.

Fast shipping in Italy 


Again Thanks you a Lot.

Yes you are right , im sorry that i did not mention,

black are 22nf 200v , transparent are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V are marked. About the resistors as i mentioned there will be missing some of the components if you requested (paid for shipping) later, but instead you will get more 0603 100nf caps(or other).
I hope i don't disappoint anyone

[AndreaEl]

ok now are perfect and all marked:
1206 Capacitor Black: 22nF 200V
1206 Capacitor Transparent: 4,7uF 10V
0603 Capacitor not marked: 100nF 50V

I have also Resistore marked 818... i measure one and my Fluke 115 tell me: 6,79k
of sure the 0603 6k81  1%

[ElektroQuark]

XpsikotiX,

Can you post the exact references of the parts?If you have them, of course.
Thank you.

[XpsikotiX]

XpsikotiX,

Can you post the exact references of the parts?If you have them, of course.
Thank you.

What do you mean by references? dataseets? All the caps are Vishay or Murata Y5V dielectric material and the resistors Yageo or Philips form what i remember .The exact part number i don't know... if its crucial info i can probably look into my old project BOM but i rather don't do that
Also i did not write the value of  the resistors because they have it on them the tolerances are here in the first post

1 reel 3000pcs 0603 820R  1%
1 reel 3500pcs 0603 5k1    5%
1 reel 5000pcs 0603 6k81  1%
1 reel 2000pcs 0805 5k49  1%
1 reel  200pcs  0805 150k  1%
1 reel 5000pcs 0805 2k21  1%
1 reel 5000pcs 0805 20k    1%
1 reel 4500pcs 0805  1k     5%
1 reel 4800pcs 1206 24k3  1%
1 reel 4800pcs 1206 1R2    5%
1 reel 3000pcs 1206 18k    1%
1 reel 3000pcs 1206 820k  1%

[ElektroQuark]

Part number yes. But if they are not available don't worry.

[Arp]

Received the shipment today. Looking good. Many thanks 

[con-f-use]

Mine arrived today, too. Thanks. Nothing was marked though, will have to measure all the caps 

[XpsikotiX]

Mine arrived today, too. Thanks. Nothing was marked though, will have to measure all the caps 

black are 22nf 200v , transparent are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V are marked. About the resistors as i mentioned there will be missing some of the components if you requested (paid for shipping) later, but instead you will get more 0603 100nf caps(or other).
I hope i don't disappoint anyone
Modify message
All the resistor are not marked because they have the value on them. Please see the first post for the tolerance