ENDED: Lot of SMD components on reel - Resistors,Capacitors and more for FREE

[jadew]

Thanks a lot!

I just got mine and they're so many

Cheers!

[neslekkim]

Got mine today (Norway), Guess I need some bags now to sort the components abit

[SolidFloyd]

Just picked up mine from the poste office today 

[amwales]

Mine arrived today, thankyou so much, I hope you enjoy the beer.

[astra]

Mine arrived previous week...!
All it's ok..!
Thank you again..!
astra

[ElektroQuark]

Arrived here today.
Thank you XpsikotiX.

[mtdoc]

Mine arrived here in the U.S. today.   Grazie!

[Nuno_pt]

Mine got here today, thanks.

[MatCat]

Got mine in the USA yesterday!  I wish they where labelled but nice, thanks!

[XpsikotiX]

Got mine in the USA yesterday!  I wish they where labelled but nice, thanks!

Do i really need to repeat my self over and over... i take the time to mark the caps that were different....the resistors have markings on them ... the UNMARKED ONES are as follows :

black(plastic tape) are 22nf 200v , transparent(plastic tape) are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V and other caps are marked. IF IS NOT MARKED MEANS ARE 100nF 50V 0603

[MatCat]

Got mine in the USA yesterday!  I wish they where labelled but nice, thanks!

Do i really need to repeat my self over and over... i take the time to mark the caps that were different....the resistors have markings on them ... the UNMARKED ONES are as follows :

black(plastic tape) are 22nf 200v , transparent(plastic tape) are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V and other caps are marked. IF IS NOT MARKED MEANS ARE 100nF 50V 0603

Even with a mag I can't read text on 0603, I just used my meter to figure them all out.

[Po6ept]

I received mine yesterday as well.  Thanks much.

[XpsikotiX]

Got mine in the USA yesterday!  I wish they where labelled but nice, thanks!

Do i really need to repeat my self over and over... i take the time to mark the caps that were different....the resistors have markings on them ... the UNMARKED ONES are as follows :

black(plastic tape) are 22nf 200v , transparent(plastic tape) are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V and other caps are marked. IF IS NOT MARKED MEANS ARE 100nF 50V 0603

Even with a mag I can't read text on 0603, I just used my meter to figure them all out.

Oh! sorry i did not have in mind that some people don't see them... i don't have any problem with my vision and i see even 0603 without mag ... Sorry again

[idpromnut]

Mine arrived today, thanks again!

Quick note, one of the marked cap strips was written as "100mF 50V"  ....  I figured that might have been a mistake so I measured that one as close to 100nF, so that is what I will assume they are.  I will go through and measure the other marked ones as well just to check.

Cheers and thanks again!

[XpsikotiX]

I marked one reel... then i did not see the point. all the markings are correct.

[idpromnut]

Heads up, on one of the strips of resistors the value on the actual parts is 818, but the value is 6k81, one of the expected values (sounds a bit like what Dave ran into a while back!).

[gibbled]

Package arrived safely in Canada today, thanks!