Author Topic: ENDED: Lot of SMD components on reel - Resistors,Capacitors and more for FREE (Read 17343 times)

XpsikotiX · « **on:** February 03, 2014, 09:13:14 am »

Hello,
I want to trade my components for a used Fluke 87V DMM or similar specs DMM

resistors:

1 reel 3000pcs 0603 820R 1%
1 reel 3500pcs 0603 5k1 5%
1 reel 5000pcs 0603 6k81 1%
1 reel 2000pcs 0805 5k49 1%
1 reel 200pcs 0805 150k 1%
1 reel 5000pcs 0805 2k21 1%
1 reel 5000pcs 0805 20k 1%
1 reel 4500pcs 0805 1k 5%
1 reel 4800pcs 1206 24k3 1%
1 reel 4800pcs 1206 1R2 5%
1 reel 3000pcs 1206 18k 1%
1 reel 3000pcs 1206 820k 1%

capacitors:

2 reel 1206 2800pcs 4.7uF 10V
2 reel 0805 4000pcs 470nF 25V
1 reel 0805 3800pcs 470nF 25V
1 reel 0805 3800pcs 220nF 25V
1 reel 0603 4000pcs 100nF 25V
3 reel 0603 4000pcs 100nF 50V
1 reel 1206 2500pcs 22nF 200V
1 reel 0603 1800pcs 220nF 16V

IC:

1 reel soic 16 38pcs ADC I2C PCF8591T Philips

loose components :

2pcs Analog Devices ADP2303ARDZ
2pcs Analog Devices ADG1234YRUZ
2pcs Analog Devices TMP03FSZ
2pcs Analog Devices MAT12AHZ
2pcs LinearTechnology LT8582EDKD
2pcs LinearTechnology LT3090EMSE
2pcs LinearTechnology LT3761EMSE
2pcs LinearTechnology LTC1760CFW

For datasheets or any questions PM me.
I prefer a EU trade

XpsikotiX · « **Reply #1 on:** February 04, 2014, 07:59:07 am »

Ok... i see that someone voted no way for this trade... so i tough to put some prices next to the components and make a total. Of course this is valid only for someone who is in the market for something like this.

resistors:

1 reel 3000pcs 0603 820R 1% $5
1 reel 3500pcs 0603 5k1 5% $4
1 reel 5000pcs 0603 6k81 1% $8
1 reel 2000pcs 0805 5k49 1% $5
1 reel 200pcs 0805 150k 1% $0
1 reel 5000pcs 0805 2k21 1% $12
1 reel 5000pcs 0805 20k 1% $12
1 reel 4500pcs 0805 1k 5% $3
1 reel 4800pcs 1206 24k3 1% $12
1 reel 4800pcs 1206 1R2 5% $12
1 reel 3000pcs 1206 18k 1% $12
1 reel 3000pcs 1206 820k 1% $12

capacitors:

2 reel 1206 2800pcs 4.7uF 10V $80 x2
2 reel 0805 4000pcs 470nF 25V $64 x2
1 reel 0805 3800pcs 470nF 25V $55
1 reel 0805 3800pcs 220nF 25V $55
1 reel 0603 4000pcs 100nF 25V $16
3 reel 0603 4000pcs 100nF 50V $12 x3
1 reel 1206 2500pcs 22nF 200V $180
1 reel 0603 1800pcs 220nF 16V $12

IC:

1 reel soic 16 38pcs ADC I2C PCF8591T Philips $2.7 x38

loose components :

2pcs Analog Devices ADP2303ARDZ $3
2pcs Analog Devices ADG1234YRUZ $14
2pcs Analog Devices TMP03FSZ $14
2pcs Analog Devices MAT12AHZ $52
2pcs LinearTechnology LT8582EDKD $16
2pcs LinearTechnology LT3090EMSE $8
2pcs LinearTechnology LT3761EMSE $14
2pcs LinearTechnology LTC1760CFW $20

total retail price around $980 at Digikey (i paid a lot more in 2008)
lets trim that to half because they are a little dusty = $490

so if someone is in the market for this components i say it does make it a good deal.
Please make me an offer with any kind of lab equipment in exchange. I really need the space in my lab.

Psi · « **Reply #2 on:** February 04, 2014, 09:14:51 am »

Its a fair trade if you can find someone who wants those exact components and has a beatup fluke they're happy to part with.

EEVblog · « **Reply #3 on:** February 04, 2014, 09:29:58 am »

The reels are maybe worth $150 or so.
And likely no one cares about a couple of random loose chips.
It's a very niche trade.

XpsikotiX · « **Reply #4 on:** February 04, 2014, 09:50:40 am »

Ok!
Then i will just give them away for free, it will brake my heart to just throw them away. Please post here the components that you want, choose only 2-3 reels to make it fair for all - Exceptions can be made if you have a really cool project in mind and need more reels. Shipping will be payed by the requester. I will dispatch only when all the component are claimed and shipping fee paid. PM for details of payment and shipping cost
Also you would need to have at least 50 posts on the forum

Spread the word !

bhilly82 · « **Reply #5 on:** February 04, 2014, 10:40:07 am »

Why not put them on ebay? Also could make a nice mail bag item. I have no use for full reels, as they would last into my grandkids life span which is a long time since i have yet to have children. I could use maybe 50 of each to have in my parts drawers but thats about it. Very good of you to give them away.

Nuno_pt · « **Reply #6 on:** February 04, 2014, 10:51:04 am »

It's like me, I just don't need the reels, to much for me and for my kid, but I could use maybe 20 or 30 each.

If you want to separate them in small quantities, count me in.

XpsikotiX · « **Reply #7 on:** February 04, 2014, 11:05:26 am »

Maybe its a good idea to send only a few components to each one. It definitely lowers the shipping costs, but increases my work and also i would have to charge like 1 dollar for packing because i would have to buy envelopes.

Please let me know if its better this way.

About putting them on ebay... i already had and now I have to pay 8 euro fees and i sold nothing.

george graves · « **Reply #8 on:** February 04, 2014, 11:36:43 am »

You want my trusty 87-V? You can pry it out of my cold dead hands!

XpsikotiX · « **Reply #9 on:** February 04, 2014, 11:38:31 am »

Quote from: george graves on February 04, 2014, 11:36:43 am

You want my trusty 87-V? You can pry it out of my cold dead hands!

No, i dont want it. I did not try to offend anyone. As you see the topic has changed. I give them away for free.

con-f-use · « **Reply #10 on:** February 04, 2014, 12:05:55 pm »

Why do you want to get rid of those? You seem kinda desperate.

If everything else fails for you, I'd take these off you. But first you should try to sell them and make a profit. Where's the rush?

Quote from: XpsikotiX on February 04, 2014, 07:59:07 am

reel 1206 2800pcs 4.7uF 10V
reel 1206 2500pcs 22nF 200V

XpsikotiX · « **Reply #11 on:** February 04, 2014, 12:11:36 pm »

Quote from: con-f-use on February 04, 2014, 12:05:55 pm

Why do you want to get rid of those? You seem kinda desperate.

If everything else fails for you, I'd take these off you. But first you should try to sell them and make a profit. Where's the rush?

Quote from: XpsikotiX on February 04, 2014, 07:59:07 am
reel 1206 2800pcs 4.7uF 10V
reel 1206 2500pcs 22nF 200V

I tried to make a profit and i lost money ... so i tried to exchange them for some equipment.. also failed so the last thing before trowing them out i want to give them away.
Do you need the entire reels or like 100-150 pcs?

con-f-use · « **Reply #12 on:** February 04, 2014, 12:27:43 pm »

Quote from: XpsikotiX on February 04, 2014, 12:11:36 pm

I tried to make a profit and i lost money ... so i tried to exchange them for some equipment.. also failed so the last thing before trowing them out i want to give them away.
Do you need the entire reels or like 100-150 pcs?

That's strange. You should be able to sell them on ebay in quantities of 200 or so and make at least a small profit. I wouldn't need more then 300 each.

XpsikotiX · « **Reply #13 on:** February 04, 2014, 12:41:43 pm »

For those who are asking why do i do this :

For the past 2 months i'm unemployed and i have a lot of free time. Two weeks ago I cleaned up my home lab (Dave's fault EEVblog #570) and found this components . Now i don't have space or use for them and i also like to do charity work .
I tried to sell them without luck. So this makes it a great opportunity for me to contribute to this awesome forum and feel good doing some charity instead of throw them
I CANT BELIEVE THAT PEOPLE QUESTION THIS MUCH GOOD WILL!

I will cut all the reels in number of 100-200 pcs of each so this will be the final way that this components will go away.

con-f-use · « **Reply #14 on:** February 04, 2014, 12:51:48 pm »

I don't think people are questioning your good will, they're just looking out for you. It's concern not malice that makes them hesitate.
Speaking for me, I don't want to take stuff from someone who is in some sort of trouble. Good luck with finding a new job. I know that can be shitty.

deth502 · « **Reply #15 on:** February 04, 2014, 01:17:47 pm »

why not make up packages of 50-100 of each one and put them up here for $10+shipping each. id bet they would go fairly well.

sgkini · « **Reply #16 on:** February 04, 2014, 02:10:02 pm »

Quote from: deth502 on February 04, 2014, 01:17:47 pm

why not make up packages of 50-100 of each one and put them up here for $10+shipping each. id bet they would go fairly well.

I totally agree with deth502 . What's the harm in trying? I guess its better than giving it for free.

Satish

XpsikotiX · « **Reply #17 on:** February 04, 2014, 02:14:37 pm »

Quote from: sgkini on February 04, 2014, 02:10:02 pm

Quote from: deth502 on February 04, 2014, 01:17:47 pm
why not make up packages of 50-100 of each one and put them up here for $10+shipping each. id bet they would go fairly well.
I totally agree with deth502 . What's the harm in trying? I guess its better than giving it for free.

Satish

This means to keep them a long time and make many trips to the post office so that will not work for me. i wait until all the components are claimed and then send them all in 1 day
Thank you anyway for the concern.

idpromnut · « **Reply #18 on:** February 04, 2014, 02:32:46 pm »

Quote from: XpsikotiX on February 04, 2014, 02:14:37 pm

This means to keep them a long time and make many trips to the post office so that will not work for me. i wait until all the components are claimed and then send them all in 1 day
Thank you anyway for the concern.

I think deth was trying to suggest that you put a description of what parts would be in a bag (perhaps put together a set of caps, a set of resistors, an a misc) and the price, and then let people post what they want and then you can ship them all in one shot like you intended.

XpsikotiX · « **Reply #19 on:** February 04, 2014, 02:53:21 pm »

Quote from: idpromnut on February 04, 2014, 02:32:46 pm

Quote from: XpsikotiX on February 04, 2014, 02:14:37 pm
This means to keep them a long time and make many trips to the post office so that will not work for me. i wait until all the components are claimed and then send them all in 1 day
Thank you anyway for the concern.

I think deth was trying to suggest that you put a description of what parts would be in a bag (perhaps put together a set of caps, a set of resistors, an a misc) and the price, and then let people post what they want and then you can ship them all in one shot like you intended.

I give them away for free, but if you feel the need to pay for them you can do that

as much or as less you want.
Now i am cutting the reels in even lengths and after i will post how many packs i can make

valentinc · « **Reply #20 on:** February 04, 2014, 02:57:28 pm »

I want a pack... Or maybe more, waiting to know how long did you cut the reels

XpsikotiX · « **Reply #21 on:** February 04, 2014, 03:15:52 pm »

80 cm +- 3cm .

valentinc · « **Reply #22 on:** February 04, 2014, 03:26:39 pm »

I want about 500 pcs of each reel (except the 150K resistors, which I see you only have 200)... I'll leave you a message with my adress... And when you are ready to ship them, let me know...

XpsikotiX · « **Reply #23 on:** February 04, 2014, 03:58:18 pm »

I'm done whit the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received.

miceuz · « **Reply #24 on:** February 04, 2014, 04:54:01 pm »

I'd chip you some dollars for a pack, PM me your paypal address.

I've bought 1k of 1k resistors last year, already can see the end of it, you can always just throw some uF caps around and it's always good to have a 100nF reel.

con-f-use · « **Reply #25 on:** February 04, 2014, 04:56:26 pm »

Quote from: XpsikotiX on February 04, 2014, 03:58:18 pm

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut

You forgot about me.

XpsikotiX · « **Reply #26 on:** February 04, 2014, 04:56:42 pm »

Quote from: miceuz on February 04, 2014, 04:54:01 pm

I'd chip you some dollars for a pack, PM me your paypal address.

I've bought 1k of 1k resistors last year, already can see the end of it, you can always just throw some uF caps around and it's always good to have a 100nF reel.

Please read all the posts. i trimmed all the reels and if you pay the postage i can send from each reel 80 cm piece . please PM with your country and i will give you a quote on shipping

XpsikotiX · « **Reply #27 on:** February 04, 2014, 04:57:22 pm »

I'm done with the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received.

Arp · « **Reply #28 on:** February 04, 2014, 05:27:00 pm »

Quote from: con-f-use on February 04, 2014, 04:56:26 pm

Quote from: XpsikotiX on February 04, 2014, 03:58:18 pm
BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
You forgot about me.

And me. Although I did just send the PM

XpsikotiX · « **Reply #29 on:** February 04, 2014, 05:46:21 pm »

I'm done with the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp - confirmed
resistor
neslekkim

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request

You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

neslekkim · « **Reply #30 on:** February 04, 2014, 07:10:01 pm »

sendt you an pm

XpsikotiX · « **Reply #31 on:** February 04, 2014, 07:31:46 pm »

I'm done with the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp - confirmed
resistor
neslekkim

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request

You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

XpsikotiX · « **Reply #32 on:** February 04, 2014, 07:50:19 pm »

Quote from: XpsikotiX on February 04, 2014, 07:31:46 pm

I'm done with the cutting.
I have 25-27 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table.
Until now i have requests from:

BravoV
Nuno_pt - confirmed
valentinc - confirmed
idpromnut
con-f-use - confirmed
Arp - confirmed
resistor
neslekkim

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the write one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request
You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

The first 9 packs will have almost all the components listed, the rest will have the same amount of components but more of the same kind!(100nf 50v capacitors mostly)

XpsikotiX · « **Reply #33 on:** February 04, 2014, 08:17:15 pm »

I'm done with the cutting.
I have 20 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table(for free).

Until now i have requests from:

Nuno_pt - confirmed
valentinc - confirmed
con-f-use - confirmed
Arp - confirmed
resistor - confirmed
neslekkim - confirmed
Fsck - confirmed
EdoNork - confirmed
idpromnut -confirmed
SolidFloyd -confirmed
gibbled -confirmed
AudioplatinumService - confirmed
amwales- confirmed
Po6ept - confirmed

sigxcpu

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the right one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request

You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

The first 9 packs will have almost all the components listed, the rest will have the same amount of components but more of the same kind!(100nf 50v capacitors mostly)

XpsikotiX · « **Reply #34 on:** February 05, 2014, 08:07:18 am »

Only 8 to go! hurry

XpsikotiX · « **Reply #35 on:** February 05, 2014, 05:55:52 pm »

Quote from: XpsikotiX on February 05, 2014, 08:07:18 am

Only 8 to go! hurry

Final call for the last 6, tomorrow morning i will withdraw the funds from paypal and hopefully i can dispatch the packs on Saturday

astra · « **Reply #36 on:** February 06, 2014, 12:17:58 am »

hi..i'm sad for your troubleshooting with job..i think i could unterstand your situation..it's more than one year that i've loose my job..so i've a lot of time..but not so much money...so i go back to my passion..electronics..so if you have the patience to divide the reels..i'd like to receive some sample of each component as i'd like to try some smd project on wich i'm dedicating my time..of course i'll pay you the cost you should pay..the envelope..the poststamp..and the time you should dedicate in dividing the reels.Please let me know if you decide to proceed in this way..
Astra.
Ps.good luck for to find a new job...
Pps.please apologized me for my poor english..but i'm not english mothertongue..

MatCat · « **Reply #37 on:** February 06, 2014, 12:41:49 am »

I want a packet, I would be willing to pay shipping.

XpsikotiX · « **Reply #38 on:** February 06, 2014, 07:02:07 am »

I'm done with the cutting.
I have 20 packs with a piece of 80 cm of every reel. I forgot to tell that loose components and the ADCs are off the table(for free).

Until now i have requests from:

Nuno_pt - confirmed
valentinc - confirmed
con-f-use - confirmed
Arp - confirmed
resistor - confirmed
neslekkim - confirmed
Fsck - confirmed
EdoNork - confirmed
idpromnut -confirmed
SolidFloyd -confirmed
gibbled -confirmed
AudioplatinumService - confirmed
amwales- confirmed
Po6ept - confirmed
MatCat - confirmed
mtdoc - confirmed
astra - confirmed
sigxcpu - confirmed
AndreaEl - confirmed
jadew - confirmed

ALL THE PACKS ARE CLAIMED AND PAYED ! PLEASE DON'T MAKE MORE REQUESTS.

Please make the request on PM and include the country you are living , i will reply with the cost of the shipping and paypal email . i will send the items to the paypal address so please make sure is the right one.

All the packs will leave together after the last payment is received. I will use Signed-for shipping with tracking number - its going to be a little high but i will arrive for sure. Also i will update you with the tracking number.
If you have any doubts don't request

You will get 1 piece of tape of each and 2 or 3 pieces of capacitors 100nf 50v (80 cm length )

The first 9 packs will have almost all the components listed, the rest will have the same amount of components but more of the same kind!(100nf 50v capacitors mostly)

The rules are : first paid first served. if you pay and i dont have any packs left i will refund you the money.

ALL THE PACKS ARE CLAIMED AND PAYED ! PLEASE DON'T MAKE MORE REQUESTS.

XpsikotiX · « **Reply #39 on:** February 11, 2014, 10:34:22 am »

All the packs are dispatched. The price of the shipping written on the envelope is without taxes so its a bit cheaper that i asked you, but be assured that i paid exactly what i asked. If anyone need proof of that i can send a scan of the receipt.
The delivery time rates are(stated by the italy post) : Europa: 6 business days, America: 14 business days .... yeah... if only

So after you receive them please write here if you are satisfied with the components that i sent you

george graves · « **Reply #40 on:** February 11, 2014, 10:42:41 am »

Quote from: XpsikotiX on February 04, 2014, 11:38:31 am

Quote from: george graves on February 04, 2014, 11:36:43 am
You want my trusty 87-V? You can pry it out of my cold dead hands!

No, i dont want it. I did not try to offend anyone. As you see the topic has changed. I give them away for free.

I was joking - I hope you know. Ok. Ha! This thread is really odd.....

AndreaEl · « **Reply #41 on:** February 11, 2014, 10:54:07 am »

I receive the component yesterday, All ok and big thanks you, But some capacitor is not labeled.

The two tape of 1206 Capacitor: Black are 1206 22nF 200V, Transparent one are: 1206 4.7uF 10V
Other tape of capacitor(0603) with no label, I measure it and mesure 127nF (maybe the 100nF?). If it's the 100nF is 25V or 50V rating?

The resistor: I have no 0805 150k 1%, but 0805 15k.

Fast shipping in Italy

Again Thanks you a Lot.

XpsikotiX · « **Reply #42 on:** February 11, 2014, 11:22:35 am »

Quote from: AndreaEl on February 11, 2014, 10:54:07 am

I receive the component yesterday, All ok and big thanks you, But some capacitor is not labeled.

The two tape of 1206 Capacitor: Black are 1206 22nF 200V, Transparent one are: 1206 4.7uF 10V
Other tape of capacitor(0603) with no label, I measure it and mesure 127nF (maybe the 100nF?). If it's the 100nF is 25V or 50V rating?

The resistor: I have no 0805 150k 1%, but 0805 15k.

Fast shipping in Italy

Again Thanks you a Lot.

Yes you are right , im sorry that i did not mention,

black are 22nf 200v , transparent are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V are marked. About the resistors as i mentioned there will be missing some of the components if you requested (paid for shipping) later, but instead you will get more 0603 100nf caps(or other).
I hope i don't disappoint anyone

AndreaEl · « **Reply #43 on:** February 11, 2014, 01:38:09 pm »

ok now are perfect and all marked:
1206 Capacitor Black: 22nF 200V
1206 Capacitor Transparent: 4,7uF 10V
0603 Capacitor not marked: 100nF 50V

I have also Resistore marked 818... i measure one and my Fluke 115 tell me: 6,79k
of sure the 0603 6k81 1%

ElektroQuark · « **Reply #44 on:** February 11, 2014, 02:23:00 pm »

XpsikotiX,

Can you post the exact references of the parts?If you have them, of course.
Thank you.

XpsikotiX · « **Reply #45 on:** February 11, 2014, 03:57:58 pm »

Quote from: EdoNork on February 11, 2014, 02:23:00 pm

XpsikotiX,

Can you post the exact references of the parts?If you have them, of course.
Thank you.

What do you mean by references? dataseets? All the caps are Vishay or Murata Y5V dielectric material and the resistors Yageo or Philips form what i remember .The exact part number i don't know... if its crucial info i can probably look into my old project BOM but i rather don't do that

Also i did not write the value of the resistors because they have it on them

the tolerances are here in the first post

1 reel 3000pcs 0603 820R 1%
1 reel 3500pcs 0603 5k1 5%
1 reel 5000pcs 0603 6k81 1%
1 reel 2000pcs 0805 5k49 1%
1 reel 200pcs 0805 150k 1%
1 reel 5000pcs 0805 2k21 1%
1 reel 5000pcs 0805 20k 1%
1 reel 4500pcs 0805 1k 5%
1 reel 4800pcs 1206 24k3 1%
1 reel 4800pcs 1206 1R2 5%
1 reel 3000pcs 1206 18k 1%
1 reel 3000pcs 1206 820k 1%

ElektroQuark · « **Reply #46 on:** February 12, 2014, 10:58:19 am »

Part number yes. But if they are not available don't worry.

Arp · « **Reply #47 on:** February 17, 2014, 04:43:23 pm »

Received the shipment today. Looking good. Many thanks

con-f-use · « **Reply #48 on:** February 17, 2014, 05:01:31 pm »

Mine arrived today, too. Thanks. Nothing was marked though, will have to measure all the caps

XpsikotiX · « **Reply #49 on:** February 17, 2014, 06:05:53 pm »

Quote from: con-f-use on February 17, 2014, 05:01:31 pm

Mine arrived today, too. Thanks. Nothing was marked though, will have to measure all the caps

black are 22nf 200v , transparent are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V are marked. About the resistors as i mentioned there will be missing some of the components if you requested (paid for shipping) later, but instead you will get more 0603 100nf caps(or other).
I hope i don't disappoint anyone
Modify message
All the resistor are not marked because they have the value on them. Please see the first post for the tolerance

jadew · « **Reply #50 on:** February 18, 2014, 08:17:15 am »

Thanks a lot!

I just got mine and they're so many

Cheers!

neslekkim · « **Reply #51 on:** February 18, 2014, 09:41:32 am »

Got mine today (Norway), Guess I need some bags now to sort the components abit

SolidFloyd · « **Reply #52 on:** February 18, 2014, 08:32:52 pm »

Just picked up mine from the poste office today

amwales · « **Reply #53 on:** February 18, 2014, 09:18:13 pm »

Mine arrived today, thankyou so much, I hope you enjoy the beer.

astra · « **Reply #54 on:** February 19, 2014, 12:57:30 am »

Mine arrived previous week...!
All it's ok..!
Thank you again..!
astra

ElektroQuark · « **Reply #55 on:** February 19, 2014, 02:12:18 pm »

Arrived here today.
Thank you XpsikotiX.

mtdoc · « **Reply #56 on:** February 19, 2014, 09:23:07 pm »

Mine arrived here in the U.S. today. Grazie!

Nuno_pt · « **Reply #57 on:** February 21, 2014, 01:22:53 pm »

Mine got here today, thanks.

MatCat · « **Reply #58 on:** February 21, 2014, 08:04:00 pm »

Got mine in the USA yesterday! I wish they where labelled but nice, thanks!

XpsikotiX · « **Reply #59 on:** February 21, 2014, 08:43:49 pm »

Quote from: MatCat on February 21, 2014, 08:04:00 pm

Got mine in the USA yesterday! I wish they where labelled but nice, thanks!

Do i really need to repeat my self over and over... i take the time to mark the caps that were different....the resistors have markings on them ... the UNMARKED ONES are as follows :

black(plastic tape) are 22nf 200v , transparent(plastic tape) are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V and other caps are marked. IF IS NOT MARKED MEANS ARE 100nF 50V 0603

MatCat · « **Reply #60 on:** February 22, 2014, 01:41:40 am »

Quote from: XpsikotiX on February 21, 2014, 08:43:49 pm

Quote from: MatCat on February 21, 2014, 08:04:00 pm
Got mine in the USA yesterday! I wish they where labelled but nice, thanks!

Do i really need to repeat my self over and over... i take the time to mark the caps that were different....the resistors have markings on them ... the UNMARKED ONES are as follows :

black(plastic tape) are 22nf 200v , transparent(plastic tape) are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V and other caps are marked. IF IS NOT MARKED MEANS ARE 100nF 50V 0603

Even with a mag I can't read text on 0603, I just used my meter to figure them all out.

Po6ept · « **Reply #61 on:** February 22, 2014, 06:51:38 am »

I received mine yesterday as well. Thanks much.

XpsikotiX · « **Reply #62 on:** February 22, 2014, 07:21:59 am »

Quote from: MatCat on February 22, 2014, 01:41:40 am

Quote from: XpsikotiX on February 21, 2014, 08:43:49 pm
Quote from: MatCat on February 21, 2014, 08:04:00 pm
Got mine in the USA yesterday! I wish they where labelled but nice, thanks!

Do i really need to repeat my self over and over... i take the time to mark the caps that were different....the resistors have markings on them ... the UNMARKED ONES are as follows :

black(plastic tape) are 22nf 200v , transparent(plastic tape) are 4.7 uF 10V and the 0603 cap that are not marked are all 100nf 50V , the 100nf 25V and other caps are marked. IF IS NOT MARKED MEANS ARE 100nF 50V 0603
Even with a mag I can't read text on 0603, I just used my meter to figure them all out.

Oh! sorry i did not have in mind that some people don't see them... i don't have any problem with my vision and i see even 0603 without mag ... Sorry again

idpromnut · « **Reply #63 on:** February 22, 2014, 07:42:39 pm »

Mine arrived today, thanks again!

Quick note, one of the marked cap strips was written as "100mF 50V" .... I figured that might have been a mistake so I measured that one as close to 100nF, so that is what I will assume they are. I will go through and measure the other marked ones as well just to check.

Cheers and thanks again!

XpsikotiX · « **Reply #64 on:** February 22, 2014, 09:18:59 pm »

I marked one reel... then i did not see the point. all the markings are correct.

idpromnut · « **Reply #65 on:** February 23, 2014, 12:38:16 am »

Heads up, on one of the strips of resistors the value on the actual parts is 818, but the value is 6k81, one of the expected values (sounds a bit like what Dave ran into a while back!).

gibbled · « **Reply #66 on:** March 01, 2014, 12:45:04 am »

Package arrived safely in Canada today, thanks!


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Poll

Does the trade seems fair to you?

Author Topic: ENDED: Lot of SMD components on reel - Resistors,Capacitors and more for FREE (Read 17343 times)

Share me