General > General Technical Chat
ADS1102CAL dead on firmware upgrade progress (((
(1/1)
SergeyOSV:
Hello everyone! my problem - my ADS1102 CAL died on firmware software ((in the firmware are removed. Now I have to repair it.
what I did:
read many topics on the forums, and came to the conclusion that ADS1102CAL and SDS1102CNL on the same hardware.
found a software update for SDS1102CNL.
dismantled its ADS1102CAL, made sure that he twin SDS1102CNL, took the chip FLASH and read it on the programmer.
compared bin-file from FLASH and software updates for SDS1102CNL and found out that the update has reversed bytes, converted it to a normal view.
further found that the code in the FLASH obnovleniyalozhitsya offset 0h001E0000.
At each stage of work with firmware, making the steps I sews FLASH, installed it and tested it in ADS1102CAL. It is not possible to repair my ADS1102CAL ((((
now the heart of the matter:
maybe someone wants to help me and will be able to. I need a bin-file from your ADS1102CAL
can someone be able to read the chip FLASH programmer working with the oscilloscope and send it to me - my gratitude would be high!
Thank you!
what do you say?
free_electron:
If the machines are the same then byte order cannot be reversed. I think you messed up the flash contents big time....
SergeyOSV:

--- Quote from: free_electron on June 06, 2013, 02:34:37 pm ---If the machines are the same then byte order cannot be reversed. I think you messed up the flash contents big time....

--- End quote ---
You misunderstood me!
FLASH file in the normal way, I have not changed!
Package files to update software includes bin firmware BUT INVERTED! Beginning of the file is the end of the firmware file and the end - the beginning of the firmware!
I changed back to the late ONLY upgrade file, compare the results obtained with the FLASH memory. matched.
But! Now I need to know in what part of the FLASH CONFIG file to be written, and it is impossible to calculate - before writing the software update, the processor has erased some of FLASH (preparation for writing updates) (((
I need a sample code that is working ADS1102CAL
then I can understand the structure of FLASH, I can fix your oscilloscope!
hhg301:
What did you ever do regarding this problem ?
Tryel:
Here - https://youtu.be/EFNX3YjZdV4 shows how to make a memory dump and the author of the video made a dump of the firmware before installing the long memory chip and after the memory increase. He has the dumps.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod