Author Topic: anyone else with an interest in LED lighting?  (Read 16735 times)

0 Members and 1 Guest are viewing this topic.

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
anyone else with an interest in LED lighting?
« on: July 17, 2010, 01:44:23 am »
I'm looking for others who want to talk about LED lighting.
This topic doesn't fit neatly in Lighting groups, nor electronics
groups, so let me try here....

I'm interested in LED lighting both for landscape lighting and
for replacement of incandescent and CFL bulbs in the house.
I'm looking at LEDs for two primary reasons, to save energy
and to stop having to replace bulbs.  For some reason, my
electric company never seems to announce a rate reduction :-)

I've been trying various bulbs for a couple of years, but since
I haven't found anyone else doing the same, I feel I've been experimenting
in the blind.

Before I ramble on and on, let me ask if anyone on eevblog is interested
in LED lighting and/or has experimented themselves?

Scott
 

Offline McPete

  • Regular Contributor
  • *
  • Posts: 163
  • Country: au
  • Layout Designer, AKA eCAD monkey
Re: anyone else with an interest in LED lighting?
« Reply #1 on: July 17, 2010, 01:58:29 am »
Sure, I'm interested.

I use Ay-Up lights on my mountain bikes when I hit the trails at night. They're more or less the standard in cycle lighting in Australia, but I do see people with far more powerful systems, and the odd custom-made system too. I've often thought about making myself a more powerful set-up for my road bike, but that hasn't happened just yet. I'd be interested to see what ideas are generated by people with a far greater depth of electronics knowledge.

I also employ some of the 3W Jaycar LED MR16 downlight globes in my room, mostly because I despise the orange tinge from the standard halogens, but I find they're a bit lacklustre in terms of intensity and beam angle(a bit too narrow).

You my find people on torch/flashlight forums to be pretty handy with this- In my brief wanderings, I've seen some damn impressive little lights appear on those pages.

Peter.
 

Offline NiHaoMike

  • Super Contributor
  • ***
  • Posts: 8951
  • Country: us
  • "Don't turn it on - Take it apart!"
    • Facebook Page
Re: anyone else with an interest in LED lighting?
« Reply #2 on: July 17, 2010, 02:35:00 am »
I have used 16 ordinary white LEDs as a lamp. It works great but is a little too directional for general use. I'm thinking about using Cree LEDs to make something brighter for general use.

Note that the energy savings by using LEDs is more than the efficiency ratings indicate since LEDs can be effectively dimmed and frequently turning them on and off does not wear them out.
Cryptocurrency has taught me to love math and at the same time be baffled by it.

Cryptocurrency lesson 0: Altcoins and Bitcoin are not the same thing.
 

Offline RayJones

  • Frequent Contributor
  • **
  • Posts: 490
    • Personal Website
Re: anyone else with an interest in LED lighting?
« Reply #3 on: July 17, 2010, 03:08:52 am »
Been dabbling with power LED's for quite some time.

First driving factor was also for my bike commute to/from work.
I first started with 3 x 1W Luxeons on the handlebars.

I then moved up to the 3W versions and turned some alloy on the lathe for them, one using a elliptical optic the other a spot.
Eventually upgraded those with Cree XR-E's, but was never able to get a suitable elliptical optic.

Then I became aware that these LED's can be very glary to oncoming cyclists (bugger the cars), so lashed out and got a Busch & Mueller IQ fly with PROPER optics and a well defined horizontally cutoff beam.
But there was a large patch of darkness between the bike and patch on the ground.

This has now been updated with the B&M IQ Cyo, and this throws a superb beam without unnecessary light shining into oncoming eyes, and better near field illumination.

Now I have moved onto doing solar powered LED spots around the garden, and this has got me now pursuing MPPT technology to keep the batteries efficiently charged. (playing with some firmware right now!)
My very infantile web page (in profile) details the woes of some LED spots we bought recently.

So yeah, LEDs are certainly the way of the future, and I'd love to get my hands on a Cree XM when they are soon released .... 
(180 Lumens / Watt  :o)
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: anyone else with an interest in LED lighting?
« Reply #4 on: July 17, 2010, 08:53:30 am »
I have used 16 ordinary white LEDs as a lamp. It works great but is a little too directional for general use. I'm thinking about using Cree LEDs to make something brighter for general use.
LEDs are only significantly better than fluorescents when a directional source is required, if you need light to be emitted in all directions, a CFL is superior in just about every way, from efficiency, cost to colour rendering. The only benefits are lifetime but bear in mind that LEDs dim and reduce in efficiency over their life, faster starting and lower temperature operation.

Quote
Note that the energy savings by using LEDs is more than the efficiency ratings indicate since LEDs can be effectively dimmed and frequently turning them on and off does not wear them out.
Fluorescents can also be dimmed with special ballasts.

I know a way to do it using a magnetic ballast, a standard phase control and a couple of other componnets but it's rather inefficient - you're better off with a proper dimming ballast.
 

Offline saturation

  • Super Contributor
  • ***
  • Posts: 4787
  • Country: us
  • Doveryai, no proveryai
    • NIST
Re: anyone else with an interest in LED lighting?
« Reply #5 on: July 17, 2010, 10:58:48 am »
Yes, have been looking into it myself too.  Some words of caution:

Many I've used being sold without brand names do not have the operation lifetimes of low voltage, low lumen LED.  You are thinking 50k-100k hours life, well maybe but not at the rated lumen ouput, some dim substantially after only several hundred hours, or blow out all together.  So be wary of plug in replacements for incadescent or CFL bulbs used in home lighting because LEDs made into arrays still have quirks to ring out.

So far, brand names work best, and they often are costly.  Sharp, Cree, Luxeon etc., but to get it working as a plug in bulb, cost 2-10x more than an equivalent CFL.  If you do the math for cost/hr its may not be worth it to 5 years because the LED bulb say at $60 vs the CFL with ~ lumens costs $5, and the power savings is 1/2 -1/3 of CFL, about 5-6W for LED and 10-15W for CFL. 

If you ran for 5 years, 365x24 ~ 9000h.  So 5W running 24/7 costs = 45 kW.h  ~ $4.5.  For CFL 15W = 135 kW h = $13.5, diff = $9.  If at best case an LED plug in module costs $30, the difference in cost between LED vs CFL here  is $30-5 = $25. A breakeven point is at $25/9 = 2.8 periods or ~ 14 years from installation.

Assuming $0.10/ kW h.


Of course, the longer you run the bulb or the pricier your CFL is, finally the saving will catch up to you sooner.  But, so far, I've seen a few high power LED modules not live up to their expected lifespan of 50k hours and give poor light output far within 5 years.  Heat is the problem.  If the lamp module is exposed to sunlight during the day, the lensing elements could deform or cloud over, or if the heat sink doesn't dissipate what it should because of high ambient temps, or the support electronics needed to drive the LED could fail before the LED itself.

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fmini-wedge.html

http://ieeexplore.ieee.org/Xplore/login.jsp?url=http%3A%2F%2Fieeexplore.ieee.org%2Fiel5%2F4681769%2F4688450%2F04688790.pdf%3Farnumber%3D4688790&authDecision=-203


That said, I would unequivocally replace flashlight bulbs or problematic HID technology with LED as the reliability and power consumption of incandescent hand held flashlights are obsolete, HID is too expensive and has 2-3x the power consumption with ~1% the shock vibration tolerance of LED.
« Last Edit: July 17, 2010, 11:46:21 am by saturation »
Best Wishes,

 Saturation
 

Offline tecman

  • Frequent Contributor
  • **
  • Posts: 444
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #6 on: July 17, 2010, 12:39:35 pm »
LEDs today should not be considered for efficiency.  Efficiency of LED lamps beats CFLs by 10% in only the most efficient designs.  Most are below CFL efficiency.  Issues such as the drive efficiency, heat dissipation and (as mentioned) lighting directionality are issues yet to be resolved.  The time will come, but it is not yet.  Also despite the potential life of LEDs, other components in the electronics, like caps, will not last the life of the LED.

For specialty lighting, they can be great, but for general lighting you are still better off with CFL today.  Quite a few articles have been published on the subject (EDN, Electronic Design, Photonics, EETimes) and the general conclusion is that we have not yet reached the point to get excited.


Paul
 

Offline NiHaoMike

  • Super Contributor
  • ***
  • Posts: 8951
  • Country: us
  • "Don't turn it on - Take it apart!"
    • Facebook Page
Re: anyone else with an interest in LED lighting?
« Reply #7 on: July 17, 2010, 12:57:05 pm »
Fluorescents can also be dimmed with special ballasts.

I know a way to do it using a magnetic ballast, a standard phase control and a couple of other componnets but it's rather inefficient - you're better off with a proper dimming ballast.
It is possible and there are plenty of Linear application notes on how to do it. But I recall that the amount of dimming is pretty limited (down to maybe 5-10%) as opposed to LEDs that can be dimmed to practically zero.
Cryptocurrency has taught me to love math and at the same time be baffled by it.

Cryptocurrency lesson 0: Altcoins and Bitcoin are not the same thing.
 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #8 on: July 17, 2010, 02:00:54 pm »
There seems to be interest, so let me start off with a post about landscape lighting, and I'll
do a separate one about home lighting.  I live in the high desert, anything I get
has to operate at temperatures between about 5F and 115F.

I have a typical lighting installation, 12V, with lights that take MR16 bulbs, and others
that have 11w wedge base bulbs.  All these bulbs are cheap, but invariably one or more
bulbs has burned out, so it seems I'm forever doing light bulb maintenance.  Also,
on long runs of wire, the fixtures near the end are a bit dimmer than the ones near
the transformer due to voltage drop.  When you add up the power, there's a
significant wattage being consumed here.

Aha!  A perfect job for LEDs I thought a couple years ago.  So my search began.

First of all, any of those "Solar Powered" landscape lighting thingies are absolute
junk.  No reason to even look at them.  Everyone's idea of "high intensity" LED didn't
match up with mine.  Luxeons were available, but I couldn't find landscape lights
which used them.  Well I could, made by someone in China, but not in quantities
a normal human could order.

So I started down the road of spinning my own PCB with an LT buck constant
current chip driving a Luxeon star.  Then I picked up some conventional
fixtures with the idea of gutting them and replacing the insides with LEDs.
The electronics worked, but getting the thermal design to work in the
fixtures was a huge problem.  I shelved the idea and waited for something
more mainstream to develop.

Then about a year ago, when I was in Lowe's (a chain home improvement store here in the
US), I passed a landscape light with the magic words "3 watt LED" on the box.
I stopped to look, and found this:

http://www.lowes.com/pd_284339-2121-WT-S41_0_

It's a Portfolio LED flood light (even though the website says 110, the stores have
it in 12v).  I think Portfolio is a house brand of Lowes, so I don't know if this is
made for them or a relabeling of another brand.  So far, these have worked like a
charm.  They don't care about polarity, and they are regulated so they aren't
picky about the line voltage.  None has failed yet.  The light is very white, which
is fine for landscape applications, but would be annoying in the house.  No information
otherwise about color temperature or lumens.  At about 4W, they replace the 20W
MR16 fixtures I used to have.  So 5 fixtures for the power of one original!

I looked at drop in MR16 LED replacements, but at the time didn't see ones
that were bright enough or seemed to have a sane thermal design. There seem
to be better ones now, but they are close to the cost of this fixture, so I tend
to just buy the fixtures right now.

But a year is a long time in LED terms.  Where's the competition?

I'm still looking for a bigger floodlight, something like a wall washer.
See attached picture.  But something with a few high intensity LEDs,
not 160 LEDs for a paltry 240 lumens like this light:

http://www.deslamps.co.uk/85-watt-led-garden-flood-light-p-5162.html

Sigh, maybe I need to go back to building my own light.

Scott
 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #9 on: July 17, 2010, 02:26:43 pm »
Here are some pictures of the Portfolio LED floodlight.

The first picture is the business end of the light.  Looks like
3 1-watt LEDs.  I removed the screws and found it was a metal
backed PCB.  The PCB presses up against a a metal plate and power
is provided through a hole in the middle.

The second picture shows the inside of the fixture.  The regulating
circuit is enclosed in the black heat shrink tubing.  The hand is mine :-)

Scott
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: anyone else with an interest in LED lighting?
« Reply #10 on: July 17, 2010, 03:19:50 pm »
LEDs today should not be considered for efficiency.  Efficiency of LED lamps beats CFLs by 10% in only the most efficient designs.  Most are below CFL efficiency.  Issues such as the drive efficiency, heat dissipation and (as mentioned) lighting directionality are issues yet to be resolved.  The time will come, but it is not yet.  Also despite the potential life of LEDs, other components in the electronics, like caps, will not last the life of the LED.
True.

http://en.wikipedia.org/wiki/Lighting_efficiency#Lighting_efficiency

Fluroscent 15.63% maximum, including ballast.
LED 22% maximum, not including power supply.

Note that this is very misleading, the figure for the fluorescent is including the ballast but the figure for the LED is taken from a Cree datasheet which doesn't include the power supply!

The efficiency figures given for LEDs including the power supply and fitting are generally worse than fluorescents. Also bear in mind that a fluorescent will be replaced more often than the LED so you'll get more life at high-efficiency.

I recommend an light unless it's a replacement for a halogen or is for an inaccessible area which will make replacement inconvenient.

 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #11 on: July 17, 2010, 04:23:29 pm »
OK, on to LED house lighting.

First off, I'm not a big fan of CFLs.  Although they have improved
dramatically in the last few years, they still have some
significant drawbacks for me.  Let's see why:

-- They don't do well at low temperatures
-- Take a while to come to full brightness.  And yes I've tested
    the "instant-on" versions.  They start up with more
    brightness than normal CFLs, but still take time to
    full brightness.
-- They are fragile.  The glass breaks and exposes you
    to nasty stuff
-- They don't like being turned on and off

I have two little girls at home, so I can't put CFL's within
their reach.  And my youngest likes to flick lights on and off,
causing CFLs out of her reach to have short lives.  Both of
these are concerns for incandescent bulbs as well to
some extent.

Then this morning, I went to switch on a light, there was a snap
and smoke with that lovely burnt ballast smell.  A Feit Electric
CFL bites the dust.  I'm going to shop for an LED replacement today.

On to the LED story.  Originally, I got some noname bulbs off of
Ebay.  Multiple LEDs, no UL marking.  I tried them and they didn't
put out much light and were distinctly blue in color.  Absolute junk.

So I instituted a new rule.  I won't buy anything unless I can find out
the lumen output and the color temperature.  That's helped
quite a bit.

The first halfway decent bulb I found was a Lights of America
PAR38 bulb at Sam's Club.  Oddly, this bulb isn't on either Sams
or LofA's website. 

It's a 11w 429 lumen bulb with a 4100K color temperature.
Not bad, still it's a bit white for general applications, but works
well in kitchen recessed lights.  I've attached some pictures of
this bulb.  Ordinary incandescents have a 2700K color temperature.

Recently, some mainstream companies have put bulbs on the market,
namely GE, Philips, and Feit Electric.  These are still quite expensive, but I've tried
a few and will give you my impressions.

The best light I've found so far is the Feit PAR38/HP/LED:

http://www.amazon.com/Feit-Electric-PAR38-HP-LED/dp/B002Q8H99Y

It's 16w, 710 lumens, with a 3000K color temperature.  Unfortunately it's $60.
I have one (and only one) and love it.  Color looks very incandescent like.
Also unfortunately, it's not dimmable (most LED bulbs are not).

Next bulb I got was a Philips 5w bulb (photo attached) that was about 230 lumens
and 5 watts.  3100K color temp.  It's still expensive at $25.  I put it in
a desk lamp my daughters use.  Quite cool to the touch and the glass part is
thick.  So far, no one has broken it.

Then out of nowhere, Home Depot introduced a light that dramatically undercuts
the existing players:

http://www.homedepot.com/h_d1/N-5yc1vZ1xhc/R-202188260/h_d2/ProductDisplay?catalogId=10053

It's 429 lumens, 8.6w at a 3000K color temperature for $19.95.  And it's DIMMABLE!
I have several of these and they are indeed a decent 40w bulb replacement.
They aren't as directional as most bulbs (good!).  I've heard Philips is coming out with
a 60w bulb, but I assume it will have a premium price.  Hope this bulb
will pressure the other guys to reduce their prices, and if a 60w version of the bulb
comes out, I'm there!

Still on the list to tackle, the flame shaped candelabra bulbs and bathroom fixture lighting.

The quest continues.  Anyone else found decent (or great) LED bulbs?

Scott
 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #12 on: July 17, 2010, 04:30:16 pm »
Here's a pic of the Home Depot Eco-Smart bulb.

I forgot to mention in the previous message that the Feit Electric bulb
is quite heavy.  So heavy in fact that I'm a little concerned that the
recessed can will not hold it up.  Clearly Feit has done its thermal
engineering, but still....

Scott
 

Offline saturation

  • Super Contributor
  • ***
  • Posts: 4787
  • Country: us
  • Doveryai, no proveryai
    • NIST
Re: anyone else with an interest in LED lighting?
« Reply #13 on: July 17, 2010, 04:41:12 pm »
As LED's deteriorate the color spectra shifts as well as lumens drops, when you see bluish tinged LEDs that are supposed to be white, those are dying or defective.  Unlike bulbs, they are unlikely to simply burn out.

If you have these LED bulbs exposed to desert sun for now over a year, it may have a the color shift it starts to deteriorate.  But you need to compare it against a virgin bulb, since there is some shift in all 'white' LEDs so you get its like new signature.





Best Wishes,

 Saturation
 

Offline saturation

  • Super Contributor
  • ***
  • Posts: 4787
  • Country: us
  • Doveryai, no proveryai
    • NIST
Re: anyone else with an interest in LED lighting?
« Reply #14 on: July 17, 2010, 04:49:34 pm »
My only concern for these LED bulb products is who makes the LED, at this stage of the game, the LED supplier is key to the quality of the LED, the final assembly will determine how long the LED will function.

The only bulb I think I would buy are those made by Sharp, as the LED and the assembly are their own design.

http://sharp-world.com/corporate/news/090611_2.html

Each bulb can be remote controlled and run $70, each.



Here's a pic of the Home Depot Eco-Smart bulb.

I forgot to mention in the previous message that the Feit Electric bulb
is quite heavy.  So heavy in fact that I'm a little concerned that the
recessed can will not hold it up.  Clearly Feit has done its thermal
engineering, but still....

Scott

Best Wishes,

 Saturation
 

Offline NiHaoMike

  • Super Contributor
  • ***
  • Posts: 8951
  • Country: us
  • "Don't turn it on - Take it apart!"
    • Facebook Page
Re: anyone else with an interest in LED lighting?
« Reply #15 on: July 17, 2010, 08:24:19 pm »
Fluroscent 15.63% maximum, including ballast.
LED 22% maximum, not including power supply.

Note that this is very misleading, the figure for the fluorescent is including the ballast but the figure for the LED is taken from a Cree datasheet which doesn't include the power supply!
A good regulator can get about 95% efficiency, or an overall efficiency of 20.9%. Even if it's only 90%, it would be 19.8% overall. Still better than fluorescent.

Also note that while fluorescents are broad light sources, LEDs are near point sources. Whether that is good or bad depends on your application. If you need light in only one area, LED definitely wins.
Quote
I have two little girls at home, so I can't put CFL's within
their reach.  And my youngest likes to flick lights on and off,
causing CFLs out of her reach to have short lives.
LEDs can be turned on and off a lot without wearing them out, solving your problem. In addition, if you turn off LEDs for short times that fluorescents would normally be left on, LEDs get an efficiency advantage.

Another advantage of LEDs is safety. In addition to having little or no fragile glass, the operating voltage is over 2 orders of magnitude lower. Some fluorescent inverters supply as much as a few kV for starting, while a common white LED runs on about 3.6V. Combine that with low voltage supply to the regulator (12v from solar battery array, etc.) and it would be much safer than fluorescent near water or outdoors. I'm in the process of building a UV light for my turtle aquarium and the main problem is ensuring safety. (I couldn't find a reasonably priced Luxeon-style deep UV LED, so I'm stuck with a CCFL tube I originally bought to find leaks in air conditioning plumbing.)
Cryptocurrency has taught me to love math and at the same time be baffled by it.

Cryptocurrency lesson 0: Altcoins and Bitcoin are not the same thing.
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: anyone else with an interest in LED lighting?
« Reply #16 on: July 17, 2010, 08:58:53 pm »
OK, on to LED house lighting.

First off, I'm not a big fan of CFLs.  Although they have improved
dramatically in the last few years, they still have some
significant drawbacks for me.  Let's see why:

-- They don't do well at low temperatures
-- Take a while to come to full brightness.  And yes I've tested
    the "instant-on" versions.  They start up with more
    brightness than normal CFLs, but still take time to
    full brightness.
-- They are fragile.  The glass breaks and exposes you
    to nasty stuff
-- They don't like being turned on and off
All those points are perfectly valid.

One note about them being fragile: you can buy compact fluorescents with a double glass envelope, they're more rugged and if the actual fluorescent lamp inside breaks you won't be exposed to any nasty stuff. There are also tubes designed for use in food preparation areas and are designed not to shatter.

By the way, the only real hazard of a fluorescent is the is broken glass and high voltage (assuming it's on when it breaks), as with a normal incandescent. There's only a tiny amount of mercury in there, a truly microscopic amount and being exposed to a 22W broken tube is probably well below the safe daily exposure level, even for a small child. Second to the glass and high voltage there's the phosphor which is poisonous if eaten but I think the broken glass will do far more damage to your digestive tract so it's not an issue.

Quote
I have two little girls at home, so I can't put CFL's within their reach.
Don't put any bulb with in their reach, unless it doesn't get hot enough to burn them and is not mains powered. If you want LEDs get the sort which run from a 12V transformer, you can buy 12V fluorescents too but I wouldn't recommend them as they contain a high voltage inverter circuit: although it's current limited so is safer than mains, it's still pretty nasty, LEDs are entirely extra low voltage which is inherently safe.

A good regulator can get about 95% efficiency, or an overall efficiency of 20.9%. Even if it's only 90%, it would be 19.8% overall. Still better than fluorescent.
I think that's a bit optimistic for a small SMPs run off the mains.

The LEDs on the datasheet referenced to by Wikipedia are naked so would need to be suitably enclosed which will result in a further drop in efficiency, so you're probably looking at at total efficiency of between 17.8% to 18.8% efficiency. Yes you're right, it's still more efficient than a fluorescent but it probably comes at a price.

Quote
Also note that while fluorescents are broad light sources, LEDs are near point sources. Whether that is good or bad depends on your application. If you need light in only one area, LED definitely wins.
Yes, even if you have a cheaper LED which is only 10% efficient, if you need a direct light source it's better than trying to focus a fluorescent which results in a loss.

Quote
Another advantage of LEDs is safety. In addition to having little or no fragile glass, the operating voltage is over 2 orders of magnitude lower. Some fluorescent inverters supply as much as a few kV for starting, while a common white LED runs on about 3.6V.
I'm sure you know this but this is negated when run off the mains because the converter will normally not be isolated.

Quote
I'm in the process of building a UV light for my turtle aquarium and the main problem is ensuring safety. (I couldn't find a reasonably priced Luxeon-style deep UV LED, so I'm stuck with a CCFL tube I originally bought to find leaks in air conditioning plumbing.)
As far as I'm aware CCFL tubes aren't the most efficient fluorescents.

Fluorescents tend to be better for UV because they work by producing short wavelength UVC and the shorter the wavelengh is, the less power is wasted in the phosphor converting it to the desired wavelength. There again, you probably need a direct light source which is might be negated by the fact that LEDs are better at this.

If you go with fluorescents then get the unfiltered blacklights if you can, the sort which appear white when unlit, not deep violet/black. Unfiltered is better because there's less loss and visible blue and violet is also good for reptiles.

Don't worry about the high voltage, it's very low current, 5mA at most, much lower than hot cathode fluorescents and as it's high frequency the only hazard is burns but it's so low current, it won't be anywhere near as bad as a hot halogen lamp.
 
« Last Edit: July 19, 2010, 08:25:29 am by Hero999 »
 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #17 on: August 19, 2010, 03:42:31 am »
So on the landscape lighting front, I've got two things on the front
burner.  First, Home Depot is carrying two new LED floodlights from Malibu
which claim 7watts of LED power.  The Malibu site doesn't seem to have these
models on it at all and I haven't been able to find any real specs.
There are two lights with part numbers 8401-9613-01 and 8401-9513-01.
Pics of the two lights below.

I have seen it lit up in the stores and it seems pretty decent.
I think I'll pick one up and compare it to the Lowe's Portfolio LED lights
I already have (which are 3 watts).

Next, I've ordered a 10watt LED on a heatsink and a 10 watt constant
current driver board from China.  No idea what I'm really getting :-)
I'll post pics when they arrive.

Scott
« Last Edit: August 19, 2010, 03:44:10 am by slburris »
 

Offline dimlow

  • Frequent Contributor
  • **
  • Posts: 301
  • Country: gb
  • Likes to be thought of as
    • Dimlow Ponders
Re: anyone else with an interest in LED lighting?
« Reply #18 on: September 22, 2010, 09:58:55 am »
Has anyone used these http://www.ledcentre.uk.com/235-230v-led-lighting.html led spots, I'm renting my house and the previous owner seemed to love spots, these 50watt spots are in every room and they mostly are fitted in banks of 4. In the dining room there are 8 x 50watt spots, I hate them and i don't much like the electric bill for these. There are a total of 40 x 50w spot lamp bulbs in this house thats 2000 Watts of lighting, im not too pleased with this as i have kids and they love to leave the lights on. Replacing all these spot lamps with leds will be expensive but im thinking i will save money by replacing them with LED lighting. What are your views?
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 19284
  • Country: gb
  • 0999
Re: anyone else with an interest in LED lighting?
« Reply #19 on: September 22, 2010, 11:23:52 am »
Their claim of it only using 4W of power but giving the same amount of light as a 40W halogen seems very optimistic. I think it will probably be equivalent to a 15W halogen, 20W at best.
 

Offline Simon

  • Global Moderator
  • *****
  • Posts: 17720
  • Country: gb
  • Did that just blow up? No? might work after all !!
    • Simon's Electronics
Re: anyone else with an interest in LED lighting?
« Reply #20 on: September 22, 2010, 11:52:03 am »
from efficiency, cost to colour rendering.


I beg to differ on the colour rendering, I've not used Led lights except for my little head lamp but I despise the fluorescent lights that emit 2700K of colour temperature because this is totally unnatural and is actually yellow and our eyes can just about ajust to make it white but it actually makes me drowsy particularly in winter, I've tried 5000K bulbs and they are a bit bluish but 3500-4200 is spot on. the catch is try and find a bloody bulb that has on the box it's colour temperature ! I call this a big rip off because i then have to go to a specialist bulb supplier who will charge 10X the costs of a crappy "standard" 2700K bulb for one that does produce white light.

I've had comments about how horrible my 5000k bulb is (you will see it tonight actually when you come round as it's in Dad's living room) and how blue it is. I know it maybe a bit blue but i think a lot of it is about what you get used to and for someone walking into a house in the evening expecting to find a light on is also expecting it to be the light he/she is used to and is "ready for it" so being confronted with a 5000K bulb when unconsciously already being ready for 2700K does kind of rock things.

Of course looking at a 2700k versus a 5000k (and you can do that tonight too) you see a big difference.
 

Offline PetrosA

  • Frequent Contributor
  • **
  • Posts: 625
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #21 on: September 22, 2010, 12:08:21 pm »
I get asked about LED lighting a lot as an electrician. My honest response is that it's almost, but not quite there yet and is still in the outrageously expensive experimental phase (CFL went through this stage in the 1980s and early 1990s). Commercial CFL (bi-pin base bulbs) tend to be much better quality with better CRI scores than what's available to most homeowners, so generally don't recommend people use the screw-in type in the house except for areas like basements, closets or outside lights. Recessed and track lighting in the US is almost all designed for the (now obsolete) incandescent reflector bulbs or halogen PAR bulbs. In some cases the R style CFL bulbs work OK as long as they don't need to be dimmed. LED replacements are getting better, but very few have a lumen output even close to halogen, so customers see a huge negative difference there.

I have found one company making an LED replacement that comes close, but the price is astronomical, making it really appropriate only in a commercial setting. The units are very well heat sinked and have cooling fans that run whenever the "bulb" is on. The PAR30 long neck replacement gives 850 lumens (compared to approx. 1130 for a 75W PAR30 and 600 for a 50W PAR30) but uses 20 watts, so you have to take that into consideration. The beam spread is not bad, but doesn't match a wide flood spread (60 degree) that a halogen gives. The price is well over $100 each for these bulbs. www.solaislighting.com
« Last Edit: September 22, 2010, 12:11:15 pm by PetrosA »
I miss my home I miss my porch, porch
 

Online Mechatrommer

  • Super Contributor
  • ***
  • Posts: 11518
  • Country: my
  • reassessing directives...
Re: anyone else with an interest in LED lighting?
« Reply #22 on: September 22, 2010, 01:15:17 pm »
quite interesting topic as i'm in the middle of home ceiling and lighting renovation. but i wonder, how much ~12W led should i used to exchange with one 25W light bulb similar to in the picture to get the same brightness? i'm going to put the led or the bulb in downlighting fixture, so it will be directional for both anyway. any idea? thanx.

ps: i have to edit to get the clearer picture.
Nature: Evolution and the Illusion of Randomness (Stephen L. Talbott): Its now indisputable that... organisms “expertise” contextualizes its genome, and its nonsense to say that these powers are under the control of the genome being contextualized - Barbara McClintock
 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #23 on: September 22, 2010, 02:02:59 pm »
I have found one company making an LED replacement that comes close, but the price is astronomical, making it really appropriate only in a commercial setting. The units are very well heat sinked and have cooling fans that run whenever the "bulb" is on. The PAR30 long neck replacement gives 850 lumens (compared to approx. 1130 for a 75W PAR30 and 600 for a 50W PAR30) but uses 20 watts, so you have to take that into consideration. The beam spread is not bad, but doesn't match a wide flood spread (60 degree) that a halogen gives. The price is well over $100 each for these bulbs. www.solaislighting.com

$100 is way overpriced now.  If you live in the US, Home Depot has just introduced a
PAR38 bulb, 18 watts, 850 lumens, 3000K color temp, for $45.  And it's *dimmable*!
This price blows away a non-dimmable Feit Electric bulb I've seen around
$70 for about 700 lumens.  Check out:

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=202324426&langId=-1&catalogId=10053

I haven't gotten one yet to try it out.  They also now have a 729 lumen bulb
PAR 30 for $40. Eco Smart is a Home Depot house brand.  Their LED bulbs are made for them by
Lighting Science Group (http://lsgc.com/).

HD just cut the price on their 429 lumen bulb to $18.47.  It looks like their aggressive
pricing is starting to have an effect on the other players.  I've seen Feit Electric's
bulbs drop by 30% in price recently.  Philips, Sylvania, and GE bulbs are still
overpriced relative to the competition.

It looks like the major players have gotten with the program as well, as I'm seeing
more and more packages labeled with both lumens and color temperature, both
vital to making a decision about a bulb.

The pricing is still high enough that I'm only replacing high use bulbs that my
family can't seem to remember to turn off, as well as difficult to replace bulbs
(high ceilings, etc.).

Scott
 

Offline slburrisTopic starter

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: us
Re: anyone else with an interest in LED lighting?
« Reply #24 on: September 22, 2010, 02:18:11 pm »
quite interesting topic as i'm in the middle of home ceiling and lighting renovation. but i wonder, how much ~12W led should i used to exchange with one 25W light bulb similar to in the picture to get the same brightness? i'm going to put the led or the bulb in downlighting fixture, so it will be directional for both anyway. any idea? thanx.

ps: i have to edit to get the clearer picture.
Looking at wikipedia, a 25w CFL is about equivalent to a 75w incandescent bulb,
so somewhere around 1100 lumens.

My experience is that for downlighting applications, you can go a little smaller
on lumens for the same light.  I assume that's because none of the light is emitted into
the fixture and wasted -- it all goes downward.

I'd look for something between 700 and 800 lumens as a replacement, but
there's nothing like trying it for yourself.

Scott
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf