Poll

Hello everyone I diagnose the SF6 gas switch by the DRM method. During the diagnosis, it turned out that my arc-extinguishing contacts were damaged. Do you have any photos of examples of the condition of a serviceable and faulty switch contact for compari

Yes
1 (100%)
No
0 (0%)

Total Members Voted: 1

Author Topic: Diagnostics of the SF6 High voltage switch  (Read 673 times)

0 Members and 1 Guest are viewing this topic.

Offline DodoTopic starter

  • Newbie
  • Posts: 4
  • Country: ma
Diagnostics of the SF6 High voltage switch
« on: November 07, 2023, 04:46:42 am »
Hello everyone  ;D I diagnose the SF6 gas switch by the DRM method. During the diagnosis, it turned out that my arc-extinguishing contacts were damaged. Do you have any photos of examples of the condition of a serviceable and faulty switch contact for comparison?
I didn't find anything on the Internet  :-\. I will be glad if you help me  :).
« Last Edit: November 07, 2023, 04:57:59 am by Dodo »
 

Offline jonpaul

  • Super Contributor
  • ***
  • Posts: 3656
  • Country: fr
  • Analog, magnetics, Power, HV, Audio, Cinema
    • IEEE Spectrum
Re: Diagnostics of the SF6 High voltage switch
« Reply #1 on: November 07, 2023, 08:30:42 am »
Hello: Familiar with SF6 for HV contacts.


https://en.wikipedia.org/wiki/Sulfur_hexafluoride_circuit_breaker


Have not used the DRM (Dynamic Resistance Method) .

 I have never seen the photos you seek.


Suggest to query the mfg of the SF6 switch for contact photos and diagnosis.

As safety, insurance and utilites are involved, STRONGLY suggest you find the local utility, regulatory etc

Better to ask on a T&D forum or electricians professional rather than EEV blog.

Research with a good SE like DuckDuckgo. (NOT Google)

Bon Chance


Jon

PS: SF6 is now banned in USA/EU/CA due to very effect on upper atm.

Most utilities transmission and distribution HV switches and CB (in the West) are being replaced by vacuum , oil, or air breakers.

https://blog.se.com/energy-management-energy-efficiency/energy-regulations/2023/10/05/f-gas-phase-out-has-been-decided-and-is-approaching-fast/
« Last Edit: November 07, 2023, 08:33:26 am by jonpaul »
An Internet Dinosaur...
 

Offline Squarewave

  • Frequent Contributor
  • **
  • Posts: 385
  • Country: gb
Re: Diagnostics of the SF6 High voltage switch
« Reply #2 on: November 07, 2023, 08:32:53 am »
SF6 is still in use in the UK, in fact Schneider are still supplying us with SF6 in their switches.
 

Offline DodoTopic starter

  • Newbie
  • Posts: 4
  • Country: ma
Re: Diagnostics of the SF6 High voltage switch
« Reply #3 on: November 07, 2023, 08:57:32 am »
Hi  :)! Thank you very much, it's a pity that you don't have any photos either  ;D We in Morocco are also gradually starting to abandon them and switch to oil switches.

Could you drop the links to the forums? Sorry, but I can't find them  ^-^
 

Offline DodoTopic starter

  • Newbie
  • Posts: 4
  • Country: ma
Re: Diagnostics of the SF6 High voltage switch
« Reply #4 on: November 07, 2023, 08:59:11 am »
You won't have a photo of damaged or worn contacts?  ;D
« Last Edit: November 07, 2023, 09:01:05 am by Dodo »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf