EEVblog Electronics Community Forum

General => General Technical Chat => Topic started by: Squirrel on December 01, 2010, 04:31:25 pm

Title: Beckman Industrial Circuitmate 9020
Post by: Squirrel on December 01, 2010, 04:31:25 pm
Hello!

My school was transferin old analog oscilloscote to digital and I pick one old to my home.

After all, does that Beckman Industrial Circuitmate 9020 machine anything? I planned to my hobby and home use, not for working, so level of requirements are not high, but are that scope any usefull or should I put to proper recycling?
Title: Re: Beckman Industrial Circuitmate 9020
Post by: saturation on December 01, 2010, 05:19:04 pm
This is a good scope, should serve you well if it works.

(http://i129.photobucket.com/albums/p206/mosesglick49/Fleetwood/BECKMAN002.jpg)

That you got it from school means you know where it came from, and roughly how it was treated.

If the techs are nice and the scope malfunctions they may know how to fix it.

I suggest you get all the manuals you can find, and download the schematics for reference.

Title: Re: Beckman Industrial Circuitmate 9020
Post by: Squirrel on December 01, 2010, 05:24:59 pm
This is a good scope, should serve you well if it works.

http://i129.photobucket.com/albums/p206/mosesglick49/Fleetwood/BECKMAN002.jpg (http://i129.photobucket.com/albums/p206/mosesglick49/Fleetwood/BECKMAN002.jpg)

That you got it from school means you know where it came from, and roughly how it was treated.

If the techs are nice and the scope malfunctions they may know how to fix it.

I suggest you get all the manuals you can find, and download the schematics for reference.



Thanks. I just make few test measuring, it seems working but it is too early say true condition.
Title: Re: Beckman Industrial Circuitmate 9020
Post by: Gae on December 21, 2020, 05:12:36 pm
After 10 years ...

I can find a working scope like this for 100€, is it a good scope ?
I have an other one, digitl. It's to have 2 scopes in my work shop.

Thanks.