General > General Technical Chat

Best RS232 terminal?

<< < (7/9) > >>

PKTKS:
Compiled alpha-sorted


* Coolterm      https://freeware.the-meiers.org/
* Cutecom      http://cutecom.sourceforge.net/
* GTKterm      https://github.com/Jeija/gtkterm
* HTerm         http://www.der-hammer.info/pages/terminal.html
* HypertermA      http://www.hilgraeve.com/htpe/download.html
* HypertermB      http://www.hyperserialport.com/
* Minicom      https://salsa.debian.org/minicom-team/minicom
* MobaXterm      https://mobaxterm.mobatek.net/
* PuttyA         https://www.putty.org/
* PuttyB         https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
* Realterm      https://realterm.sourceforge.io/
* SecureCRT      https://www.vandyke.com/products/index.html
* SerialPlot      https://hackaday.io/project/5334-serialplot-realtime-plotting-software
* SerialPortMon   https://helmpcb.com/software/serial-port-monitor
* TelixA         https://archive.org/details/TelixCommunications_1020
* TelixB         https://vetusware.com/download/Telix%20Communications%203.22/?id=3319
* TelixC         https://vetusware.com/download/Telix%204.25/?id=43
* Terminate      https://vetusware.com/manufacturer/SerWiz%20Comm/?author=5828
* TeraTermA      https://ttssh2.osdn.jp/
* TeraTermB      http://www.vector.co.jp/authors/VA002416/teraterm.html
* Terminal      https://sites.google.com/site/terminalbpp/
* Termite      https://www.compuphase.com/software_termite.htm
* YAT         https://sourceforge.net/projects/y-a-terminal/
Paul

nctnico:
Great list! It should become a sticky somewhere!

SecureCRT looks very promising to me.

Thelanie:
Wow im astounded by all the replies, thanks for sharing your ideas/experience with me, i will deffinitely check out some of the programs you have suggested, Putty i already use for my Raspberry pi and such but it is not the solution we are looking for work, but i will try the other programs suggested, thanks a lot!  :-+

David Hess:
I still use Telix either under DOS or as a virtualized DOS program.

jesuscf:
PuTTY.  I like starting it from the command prompt or using a batch file, for example:

D:\>putty -serial COM3 -sercfg 115200,8,n,1,N -v

To check what ports are available from the command prompt:

D:\>reg query HKLM\HARDWARE\DEVICEMAP\SERIALCOMM

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod