General > General Technical Chat
BJT output I-V characteristic
<< < (4/4)
amir.razzaqi:

--- Quote from: T3sl4co1l on October 02, 2023, 03:13:46 pm ---I don't see in your screenshots where Ib increased from increased Vcc.

Tim

--- End quote ---

Sorry, it was a typo. I mean "decrease"
Sredni:
To add confusion, let me say that in certain conditions you can actually see base current change with VCE.
If you do not pull the base toward a fixed voltage, VBE can be seen changing appreciably with VCE. You need a very big resistance in base, so some might argue that VBE actually changes when IB=0, but if I can measure VBE with an ordinary voltmeter

https://www.eevblog.com/forum/testgear/what-is-the-internal-resistance-of-the-uni-t-ut139c-%28on-the-mv-range%29/
(see page 2. the last pictures)

...then we must conclude that a base current proportional to the base-emitter voltage is actually flowing due to the applied VCE.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod