Buying Individual Turned Pin Sockets & Pins?

[dexters_lab]

i've been salvaging these off some old scrap boards as they are proving very useful to me, does anyone know where i might be able to buy some new?

they are an individual turned pin socket and a pin and are great for making adaptor boards and stuff that plug into each other, especially when modding old through-hole pcbs

[T3sl4co1l]

Mill-Max and such.  They're not cheap though: these sockets cost about $3 each in parts.



Tim

[dexters_lab]

thanks, i'll have a browse through their catalog

[daqq]

There's a lot of socket out there. I have never searched for the counter part:
 http://uk.farnell.com/c/connectors/ic-sockets?no-of-contacts=1contacts

[woodchips]

Harwin?

[Benta]

Preci-Dip
http://www.precidip.com/en/Products/Contacts.html

[FrankE]

Vero, Harwin, Multi-Contact?

[Mr.B]

I have used the following TE Connectivity sockets for Nixie tubes in the past.
A bit pricey, but very good sockets. ( >100 = NZD 0.488 ea. )
I am not sure where you would source a pin like your one though.

https://nz.mouser.com/ProductDetail/571-5645500-1

[rdl]

Not exactly what you're looking for, but interesting.

http://www.robotroom.com/Color-PCBs-5.html

https://www.digikey.com/product-detail/en/on-shore-technology-inc/WMS-080Z/ED2680-ND/2175337

[dexters_lab]

Thanks everyone, plenty of options to look at!

[tpowell1830]

One more...

https://www.mill-max.com/product_finder/1

[tooki]

One more...

https://www.mill-max.com/product_finder/1

^^ Mill-Max was in the very first reply...