| General > General Technical Chat |
| Component Identification help |
| (1/1) |
| andrevamp9297:
Hi thanks in advance for you help, I have a component (I believe it is a thermistor. Can you confirm) de soldered from a device. Could somebody help me identify the type of thermistor and suggest a method/procedure to identify the resistance ? Also on close examination I found that the there are two thermistor connected in series with each other. Could somebody guide me to find the values ? I am enclosing the picture . On one of the thermistor it is written as "151" and on other as "52 56" Thanks again |
| Jetecnet:
151 in a sot23 is likely an NXP KTY82/151 Silicon temp sensor |
| Navigation |
| Message Index |