Author Topic: [SOLVED] Data on com port X comes out on com port Y - (both on one USB cable)  (Read 341 times)

0 Members and 1 Guest are viewing this topic.

Offline eTobeyTopic starter

  • Super Contributor
  • ***
  • Posts: 1187
  • Country: de
  • Virtual Features for the SDS800XHD -> My website
    • Virtual feature script
Hi there,

i got this strange problem, where the data of com port X comes out at com port Y. It also comes out on com port X (as it should).
X is a Arduino ProMicro, and Y is a STM Virtual com port. Those two ports are from one USB hub on one cable.
It worked before, with only a few issues.

Searching for these terms on google is a pain in the a$$. Hope some of you could help me.
« Last Edit: November 20, 2023, 07:31:34 pm by eTobey »
"Sometimes, after talking with a person, you want to pet a dog, wave at a monkey, and take off your hat to an elephant."(Maxim Gorki)

SDS800X HD issues/tips/workarounds
 

Offline eTobeyTopic starter

  • Super Contributor
  • ***
  • Posts: 1187
  • Country: de
  • Virtual Features for the SDS800XHD -> My website
    • Virtual feature script
Re: Data on com port X comes out on com port Y - (both on one USB cable)
« Reply #1 on: November 20, 2023, 07:31:01 pm »
Well i helped myself:
 A restart fixed this issue.
"Sometimes, after talking with a person, you want to pet a dog, wave at a monkey, and take off your hat to an elephant."(Maxim Gorki)

SDS800X HD issues/tips/workarounds
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf