Author Topic: Disassembly a M68HC11 binary  (Read 8435 times)

0 Members and 1 Guest are viewing this topic.

Offline charlycopTopic starter

  • Newbie
  • Posts: 4
  • Country: fr
Disassembly a M68HC11 binary
« on: March 31, 2024, 10:50:41 am »
Hi Guys,

I'm trying to find a tool to disassemble the M68HC11 complied binary I have. It comes from a motorcycle Aprilia ECU eprom.

I tried Ghidra, but it seems not to handle this 8-bit processor. I tried C.A.T.S, but it crashes, and DSH11 doesn't even start.

Any idea?

Thanks for your help.
 

Online DavidAlfa

  • Super Contributor
  • ***
  • Posts: 6403
  • Country: es
« Last Edit: March 31, 2024, 05:08:22 pm by DavidAlfa »
Hantek DSO2x1x            Drive        FAQ          DON'T BUY HANTEK! (Aka HALF-MADE)
Stm32 Soldering FW      Forum      Github      Donate
 

Online Benta

  • Super Contributor
  • ***
  • Posts: 6420
  • Country: de
Re: Disassembly a M68HC11 binary
« Reply #2 on: March 31, 2024, 12:01:33 pm »
Here's assembler and disassembler:
https://www.techedge.com.au/utils/
 

Offline DiTBho

  • Super Contributor
  • ***
  • Posts: 4367
  • Country: gb
Re: Disassembly a M68HC11 binary
« Reply #3 on: March 31, 2024, 03:07:02 pm »
Here's assembler and disassembler:
https://www.techedge.com.au/utils/

links to binary are gone - 404  :-//
The opposite of courage is not cowardice, it is conformity. Even a dead fish can go with the flow
 

Online Benta

  • Super Contributor
  • ***
  • Posts: 6420
  • Country: de
Re: Disassembly a M68HC11 binary
« Reply #4 on: March 31, 2024, 04:52:18 pm »
Didn't check that. Here it is:
 
The following users thanked this post: DiTBho

Offline charlycopTopic starter

  • Newbie
  • Posts: 4
  • Country: fr
Re: Disassembly a M68HC11 binary
« Reply #5 on: April 01, 2024, 07:05:42 am »
Didn't check that. Here it is:

As I said in my question, I have it and it doesn't run (see attached). But thanks a lot, and  you are right, I need just to make it work. Do you think with a virtual box of winXP or Win7, it will run ?


« Last Edit: April 01, 2024, 07:10:44 am by charlycop »
 

Offline Zoli

  • Frequent Contributor
  • **
  • Posts: 583
  • Country: ca
  • Grumpy old men
Re: Disassembly a M68HC11 binary
« Reply #6 on: April 01, 2024, 07:19:41 am »
Didn't check that. Here it is:
As I said in my question, I have it and it doesn't run (see attached). But thanks a lot, and  you are right, I need just to make it work. Do you think with a virtual box of winXP or Win7, it will run ?
It's a 16 bit app(DOS, AFAIK); you can run thru virtual machines, emulators, or Winevdm.
 

Offline charlycopTopic starter

  • Newbie
  • Posts: 4
  • Country: fr
Re: Disassembly a M68HC11 binary
« Reply #7 on: April 01, 2024, 08:16:15 am »
It's a 16 bit app(DOS, AFAIK); you can run thru virtual machines, emulators, or Winevdm.
Yes, ok I tried on WinXP, it's working thanks a lot.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf