| General > General Technical Chat |
| Divider boxes / individual joinable boxes with lids on each compartment? |
| (1/2) > >> |
| forrestc:
Now that I'm spending yet another saturday re-sorting a divider box that I dropped spewing screws all over the place, I've had enough. I have some SMD resistor/cap assortment boxes which have lids over each individual compartment, and a lid over the whole thing so it's more rugged when moving around. While these are fine for tiny SMT chip resistors, the individual compartments are too small for anything much larger. Think screws in this case, but I also have things like SMT relays, various through hole components, connectors, and so on. All probably need around a 20mm square compartment at the smallest, but some will need larger compartments. Right now I'm keeping these in plano divider boxes which work really well until I drop a box. I swear that I saw on aliexpress or similar small boxes which were around the size of an individual divider in these boxes (~20mm square, maybe with options smaller/bigger) that each had a lid, and that you could join together into one system as they slid together and interlocked. The ones I saw I remember had some sort of harder colored plastic on the base square part, and the lid I think was out of a clear material. Of course my searching hasn't turned up anything but I probably haven't used the right term. I'd also be happy with something like the SMD one I have where all of the compartments are individually lidded with a lid over the top to keep them all closed but with larger bins.. However, what I don't want to do is to buy some of the cheap "pill organizer" style where the lids are flimsy, and open when you look at them the wrong way. The plano divider boxes have firm latches which don't open unless you want them to. Does anyone know where I can get something like I describe? |
| mendip_discovery:
I am a sorter and organiser if things. The internet has been and blessing and an annoyance to me. Great I can buy random stuff but when it comes to storage boxes it can be a bit of a pain. Many have misleading photos as in photoshoped hands that make them look big when they are small. Then there are the ones that are just poorly designed and will not stack etc. One thing I have found is that you need to look for boxes that have secure lids but not so secure that in your efforts to open them you end up with everything over the floor. My current plan for sorting electical bits will no doubt involve 3d printed storage but as of yet I just have a few draws with parts in non static bags. I would love to go the sortimo route but that is just expensive. There is a UK Firm that was doing storage stuff and they go by the name of Really Useful Boxes. https://www.reallyusefulstorageboxes.co.uk/really-useful-storage-boxes-0-07-litre-to-1-5-litre-c102x2022624 Some of the smaller boxes do stack on the bigger boxes even us just sideways. They also do small racks for the small ones so you can grab them without having to dive through them all. In the shed I have all the nuts and bolts sorted into about 20 boxes and sorted and stored by width, length and type. |
| tom66:
I inherited a component rack with a number of broken drawers, and have been slowly replacing them with 3D printed ones. One benefit of this is you can configure the drawers to be whatever you want, within reason. I've taken to use the colour to have some meaning too. You could quite easily print dividers of any shape and style for these. A single drawer takes about 2 hours to print. I'm happy to share the design, though it's fairly simple and you would of course need access to a 3D printer (best ~$300 I spent in a while, though you need to be prepared to constantly tweak the bugger to get it printing well.) |
| ledtester:
If you have a 3d printer you might be interested in the "gridfinity" project: https://hackaday.com/2022/04/18/gridfinity-3d-printed-super-quick-tool-storage-and-retrieval/ The youtube videos: Gridfinity: Your Ultimate Modular Workshop is FREE! https://youtu.be/ra_9zU-mnl8 3D Print a Modular Toolbox, Soldering Station, and More! https://youtu.be/Bd4NnHvTRAY Catalogs of the models: https://github.com/jeffbarr/gridfinity-catalog https://gridfinity.xyz/catalog/ |
| PlainName:
--- Quote ---I swear that I saw on aliexpress or similar small boxes which were around the size of an individual divider in these boxes (~20mm square, maybe with options smaller/bigger) that each had a lid, and that you could join together into one system as they slid together and interlocked. The ones I saw I remember had some sort of harder colored plastic on the base square part, and the lid I think was out of a clear material. Of course my searching hasn't turned up anything but I probably haven't used the right term. --- End quote --- https://www.aliexpress.com/item/32888185297.html |
| Navigation |
| Message Index |
| Next page |